• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.2
• /
• pp.313-320
• /
• 2014

Purpose : The purpose of the study is to evaluate the efficiency of Coaxial MLC VMAT plan (Using $273^{\circ}$ and $350^{\circ}$ collimator angle) That the leaf motion direction aligned with axis of OAR (Organ at risk, It means spinal cord or cauda equine in this study.) compare to Universal MLC VMAT plan (using $30^{\circ}$ and $330^{\circ}$ collimator angle) for spine SBRT. Materials and Methods : The 10 cases of spine SBRT that treated with VMAT planned by Coaxial MLC and Varian TBX were enrolled. Those cases were planned by Eclipse (Ver. 10.0.42, Varian, USA), PRO3 (Progressive Resolution Optimizer 10.0.28) and AAA (Anisotropic Analytic Algorithm Ver. 10.0.28) with coplanar $360^{\circ}$ arcs and 10MV FFF (Flattening filter free). Each arc has $273^{\circ}$ and $350^{\circ}$ collimator angle, respectively. The Universal MLC VMAT plans are based on existing treatment plans. Those plans have the same parameters of existing treatment plans but collimator angle. To minimize the dose difference that shows up randomly on optimizing, all plans were optimized and calculated twice respectively. The calculation grid is 0.2 cm and all plans were normalized to the target V100%=90%. The indexes of evaluation are V10Gy, D0.03cc, Dmean of OAR (Organ at risk, It means spinal cord or cauda equine in this study.), H.I (Homogeneity index) of the target and total MU. All Coaxial VMAT plans were verified by gamma test with Mapcheck2 (Sun Nuclear Co., USA), Mapphan (Sun Nuclear Co., USA) and SNC patient (Sun Nuclear Co., USA Ver 6.1.2.18513). Results : The difference between the coaxial and the universal VMAT plans are follow. The coaxial VMAT plan is better in the V10Gy of OAR, Up to 4.1%, at least 0.4%, the average difference was 1.9% and In the D0.03cc of OAR, Up to 83.6 cGy, at least 2.2 cGy, the average difference was 33.3 cGy. In Dmean, Up to 34.8 cGy, at least -13.0 cGy, the average difference was 9.6 cGy that say the coaxial VMAT plans are better except few cases. H.I difference Up to 0.04, at least 0.01, the average difference was 0.02 and the difference of average total MU is 74.1 MU. The coaxial MLC VMAT plan is average 74.1 MU lesser then another. All IMRT verification gamma test results for the coaxial MLC VMAT plan passed over 90.0% at 1mm / 2%. Conclusion : Coaxial MLC VMAT treatment plan appeared to be favorable in most cases than the Universal MLC VMAT treatment planning. It is efficient in lowering the dose of the OAR V10Gy especially. As a result, the Coaxial MLC VMAT plan could be better than the Universal MLC VMAT plan in same MU.

• Progress in Medical Physics
• /
• v.17 no.4
• /
• pp.192-200
• /
• 2006

We evaluated the positional accuracy of the delivered beams to the target in a phantom by simulating the whole process of the radiation treatments Including CT scanning, planning and beam exposures with MLCs. For this purpose, a phantom was made to calibrate the alignment between the CT and the attached laser system. A new, convenient method was also devised to align the setup lasers in the treatment room. Film was used for the Identification of the delivered beam and analyzed with a homemade computer program. The positional differences between the target and the beam centers varied with the couch rotations. The accelerator we used showed a maximum discrepancy of 2.0 mm at the table angle of $295^{\circ}$. The same measurements based on the new isocenter from the Winston-Lutz test resulted in the maximum of 1.35 mm for all rotation angles. The evaluation of the differences between the target and the beam centers is useful for the treatment planning.

• Journal of Biosystems Engineering
• /
• v.42 no.2
• /
• pp.104-111
• /
• 2017

Purpose: We have studied the necessary qualities of seedlings of some leafy vegetables for a riding-type two-row automatic transplanter. When seedlings are planted using a transplanter, long roots may be rounded in the bottom of the tray, and this can interfere with the separation of the seedlings. Uprightness related to leaf spread angle is an important quality for seedlings in mechanical planting. Methods: To select cultivars suitable for the transplanter, we compared varieties of Kimchi cabbage (Chukwang, Daetong, Whipalam and Namdo), head lettuce (Abi and Sensation), cabbage (YR Onnuri, YR Hogel, Harutama, and Ogane), and broccoli (Nicegreen and Earlyyou). To compare the effect of bed soil on root formation and growth, we used five types of soil: Chologi, Burger, Wonjomix, Bio, and Baroker with 2.6-3 L per tray. Growth increment and the degree of root formation were measured according to the RDA guidelines 25 days after sowing for Kimchi cabbage and head lettuce and 44 days after sowing for cabbage and broccoli. Conclusions: According to the plug tray, the optimum seedling age in both 128- and 200-hole trays was 28 days for Kimchi cabbage and 44 days for cabbage and broccoli. Head lettuce took 35 days in 128-hole trays and 31 days in 200-hole trays. Burger soil was most effective for root formation and growth of the four kinds of leafy vegetables; it appeared that smaller soil volume led to faster root formation.

• Korean Journal of Environmental Biology
• /
• v.34 no.3
• /
• pp.169-176
• /
• 2016

Although chemical fertilizers have a quick effect and broad applicability to agricultural fields, they have caused many problems like increasing soil acidity or decreasing soil organic matters. Environmental-friendly agriculture has been attempted in various ways such as organic agriculture, natural farming, low input and sustainable agriculture. The common interest of all environmental-friendly systems is to decrease burden to agricultural environment by low input of agricultural labor and materials. This study was conducted to estimate overwintering capacity and genetic distance among Chinese Milk Vetch (Astragalus sinicus, CMV) collections based on morphological characteristics and AFLP (Amplified fragment length polymorphism) analysis. Furthermore, the effect of CMV as green manure was observed in mix-cultured paddy fields with rice, sesame and sweet-potato. An another objective of this study was also to compare the pattern of weed occurrence in paddy fields with or without CMV and different rice transplanting times. The CMV collected from Paju district in central region of Korea was successively occurring through self-reseeding without artificial management. However, there was no noticeable difference in growth habit between Paju native CMV and introduced CMV from China which is currently used in farm fields. On the basis of multi-dimensional scaling and tree analyses, there are no significant difference of agricultural growth characteristics among Paju and chinese collections only excepting leaf angle and root length. The flowering time of Gurye collection was fast for 1 week as compared to other collections. AFLP that was commonly used for plant classfication, was applied to exam the genetic variation of CMV collections. Total 579 PCR products and 336 polymorphic fragments were generated using 8 primer pairs.

• Horticultural Science & Technology
• /
• v.32 no.3
• /
• pp.366-374
• /
• 2014

The study was conducted to investigate the possibility that epigenetic DNA methylation causes tree phenotypic variation in autotetraploids through evaluating the phenotypic variation and DNA methylation in autotetraploids occurred spontaneously from diploid trifoliate orange. Chromosome analysis confirmed that fourteen trifoliate orange trees of selected by flow cytometry were tetraploids (2n = 4X = 36) without any aneuploids. Chromomycin A3 staining determined that these trees were all autotetraploid with doubled chromosome set. Tree phenotypes, such as tree height and width, branching number, length, and angle, internode length, and leaf characteristics, varied in the autotetraploids. Chlorophyll indices were diverse in the autotetraploids, but photosynthetic rates were not significantly different. In addition, a wide range of variation was observed in stomatal density and guard cell length. Analysis of global cytosine DNA methylation showed that there was a variation of the methylation level in autotetraploids. More than half of 14 autotetraploids had at least 2 times higher methylation level than diploid trifoliate orange. The results indicate that tree phenotypic variation in autotetraploids might be related to global DNA methylation for reducing gene redundancy.

• Current Research on Agriculture and Life Sciences
• /
• v.13
• /
• pp.45-53
• /
• 1995

This research was conducted to investigate morphological and genetic variation of Allium victorialis val. platyphyllum which growed wild in Mt. Hambaek, Mt. Odae, and Ullungdo. The tree layer of Allium victorialis var. platyphyllum community in Mt. Hambaek and Mt. Odae was dominated by Quercus mongolica. The tree layer of Ullungdo generally consist of Fagus crenata var. multinervis, Acer triflorum, Sorbus commixta, and Tilia insularis. In the herb layer, Rumohra standishii, Trillium tschonoskii, and Lilium hansonii are common at Allium victorialis var. platyphyllum community in Ullungdo. The vegetation in Ullungdo was widely different from those in Mt. Hambaek and Mt. Odae by species composition. The result of Principal Component Analysis(PCA) and Canonical Discriminent Analysis of by the 8 characters showed that Allium victorialis var. platyphyllum could be classified into 2 groups: (one ; Mt. Hambaek and Mt. Odae, the other ; Ullungdo). In PCA, the major factors in the first principal component group was angle of leaf apex. Variation of band by isozyme GOT(glautamate oxaloaccetate transaminase) is similar between Mt. Hambaek and Mt. Odae. However, Ullungdo differed from Mt. Hambaek and Mt. Odae in variation of bands.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.2
• /
• pp.227-232
• /
• 1983

Two single cross maize hybrids planted on May 4 and 25 and June 15, 1982 were grown at 40,000:55,000 70,000 and 85,000 plants per hectare to evaluate plant density effect on growth and grain yield at different planting dates. Two hybrids with different leaf angle (Suweon 19 with horizontal leaves and Suweon 58 with erect leaves) and the same maturity were used. The number of days from planting to silking varied from 74 to 58 days as planting was delayed from May 4 to June 15. However, growing degree days from planting to silking was about $810^{\circ}C$ regardless planting dates. Grain yields of two hybrids were significantly decreased as planting was delayed. The number of ears per 100 plants and the number of kernels per ear of two hybrids were linearly decreased with increasing plant density. The optimum plant density for Suweon 19 estimated by Duncan's method was about 55,000 plants hectare for May 4 and 25 plantings and decreased to 32,000 plants/hectare for June 15 planting. The optimum density for Suweon 58 was estimated to be about 71,000 plants/hectare for May 4 planting and 54,000 plants/hectare for May 25 planting, respectively.

• Radiation Oncology Journal
• /
• v.13 no.4
• /
• pp.391-396
• /
• 1995

Purpose : The Conformal Radiation Therapy has bee widely used under favour of development of computer technologies. The delivery of a large number of static radiation fields are being necessary for the conformal irradiation. In this paper we investigate dosimetric characteristics on penumbra regions of a multileaf collimator(MLC), and compare to those of lead alloy block for the optimal use of the system in 3-D conformal radiotherapy. Materials and Methods : The measurement of penumbra by MLC or lead alloy block was performed with 6 or 10 MV X-rays. The film was positioned at a dmax depth and 10 cm depth, and its optical density was determined using a scanning videodensitometer. The effective penumbra, the distance from $80{\%}$ to $20{\%}$ isodose lines and $90{\%}$ to $10{\%}$ were analyzed as a function of the angle between the direction of leaf motion and the edge defined by leaves. Results : Increasing MLC angle ($0-75^{\circ}$) was observed with increasing the penumbra widths and the scalloping effect. There was no definite differences of penumbra width from $80{\%}$ to $20{\%}$ isodose lines, while being the small increase of penumbra width from $90{\%}$ to $10{\%}$ isodose line varing the depth and energy. The effective penumbra width of lead alloy block are agree resonably with those of MLC within 4.8mm. Conclusion : The comparative qualitative study of the penumbra between MLC and lead alloy block demonstrate the clinical acceptability and suitability of the multileaf collimator for 3-D conformal radiotherapy.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.2
• /
• pp.239-245
• /
• 2014

Purpose : The purpose of this study is to verify the accuracy of dose delivery according to the pitch and roll rotational setup error with 6D robotic couch in Intensity Modulated Radiation Therapy (IMRT) for pelvic region in patients. Materials and Methods : Trilogy(Varian, USA) and 6D robotic couch(ProturaTM 1.4, CIVCO, USA) were used to measure and analyze the rotational setup error of 14 patients (157 setup cases) for pelvic region. The total 157 Images(CBCT 78, Radiography 79) were used to calculate the mean value and the incidence of pitch and roll rotational setup error with Microsoft Office Excel 2007. The measured data (3 mm, 3%) at the reference angle ($0^{\circ}$) without couch rotation of pitch and roll direction was compared to the others at different pitch and roll angles ($1^{\circ}$, $1.5^{\circ}$, $2^{\circ}$, $2.5^{\circ}$) to verify the accuracy of dose delivery by using 2D array ionization chamber (I'mRT Matrixx, IBA Dosimetry, Germany) and MultiCube Phantom(IBA Dosimetry, Germany). Result from the data, gamma index was evaluated. Results : The mean values of pitch and roll rotational setup error were $0.9^{\circ}{\pm}0.7$, $0.5^{\circ}{\pm}0.6$. The maximum values of them were $2.8^{\circ}$, $2.0^{\circ}$. All of the minimum values were zero. The mean values of gamma pass rate at four different pitch angles ($1^{\circ}$, $1.5^{\circ}$, $2^{\circ}$, $2.5^{\circ}$) were 97.75%, 96.65%, 94.38% and 90.91%. The mean values of gamma pass rate at four different roll angles ($1^{\circ}$, $1.5^{\circ}$, $2^{\circ}$, $2.5^{\circ}$) were 93.68%, 93.05%, 87.77% and 84.96%. when the same angles ($1^{\circ}$, $1.5^{\circ}$, $2^{\circ}$) of pitch and roll were applied simultaneously, The mean values of each angle were 94.90%, 92.37% and 87.88%, respectively. Conclusion : As a result of this study, it was able to recognize that the accuracy of dose delivered is lowered gradually as pitch and roll increases. In order to increase the accuracy of delivered dose, therefore, it is recommended to perform IGRT or correct patient's position in the pitch and roll direction, to improve the quality of treatment.

• Korean Journal of Remote Sensing
• /
• v.25 no.1
• /
• pp.31-44
• /
• 2009

The objective of this study was to measure backscattering coefficients of paddy rice using a L-, C-, and X-band scatterometer system with full polarization and various angles during the rice growth period and to relate backscattering coefficients to rice growth parameters. Radar backscattering measurements of paddy rice field using multifrequency (L, C, and X) and full polarization were conducted at an experimental field located in National Academy of Agricultural Science (NAAS), Suwon, Korea. The scatterometer system consists of dual-polarimetric square horn antennas, HP8720D vector network analyzer ($20\;MHz{\sim}20\;GHz$), RF cables, and a personal computer that controls frequency, polarization and data storage. The backscattering coefficients were calculated by applying radar equation for the measured at incidence angles between $20^{\circ}$ and $60^{\circ}$ with $5^{\circ}$ interval for four polarization (HH, VV, HV, VH), respectively. We measured the temporal variations of backscattering coefficients of the rice crop at L-, C-, X-band during a rice growth period. In three bands, VV-polarized backscattering coefficients were higher than hh-polarized backscattering coefficients during rooting stage (mid-June) and HH-polarized backscattering coefficients were higher than VV-, HV/VH-polarized backscattering coefficients after panicle initiation stage (mid-July). Cross polarized backscattering coefficients in X-band increased towards the heading stage (mid-Aug) and thereafter saturated, again increased near the harvesting season. Backscattering coefficients of range at X-band were lower than that of L-, C-band. HH-, VV-polarized ${\sigma}^{\circ}$ steadily increased toward panicle initiation stage and thereafter decreased, and again increased near the harvesting season. We plotted the relationship between backscattering coefficients with L-, C-, X-band and rice growth parameters. Biomass was correlated with L-band hh-polarization at a large incident angle. LAI (Leaf Area Index) was highly correlated with C-band HH- and cross-polarizations. Grain weight was correlated with backscattering coefficients of X-band VV-polarization at a large incidence angle. X-band was sensitive to grain maturity during the post heading stage.