• 수산해양기술연구
• /
• 제42권4호
• /
• pp.217-227
• /
• 2006

This research aims at establishing the application of canvas kite to the fishing gear through the analysis of the lift/drag tests of the kites have been performed in our previous finding. Now that several methodologies were designed to find the most effective triangular model as a buoyancy device applied to the fishing gear. Comparisons of drag/lift were made by installing the model in an installation frame instead of the prototype. Also, we have considered the application of canvas kite to the prototypic fishing gear by calculation using the result of this test. The results obtained from the above approaches are summarized as follows, where attack angle, lift coefficient, maximum lift coefficient and drag coefficient are denoted as $B,\;C_L,\;C_Lmax\;and\;C_D$ respectively. The camber showed a gradual increase with an increase of fluid velocity. There was a big discrepancy in B=20 unlike B=30. Even if the kite retreats along the fluid flow, there is little relationship with the velocity variation. Lifts calculated with the kites were bigger and drags were smaller than those of the calculations with the float only. The kite as the buoyancy device will be very useful when the appropriate applications and the stability are met.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2003년도 추계학술대회 논문집
• /
• pp.39-42
• /
• 2003

Leading edge extension(LEX) in a highly swept shape applied to a delta wing features the modern air-fighters. The LEX vortices generated upon the upper surface of the wing at high angle of attack enhance the lift force of the delta wing by way of increased negative suction pressure over the surfaces. The present 3-D stereo PIV includes the Identification of 2-D cross-correlation equation, stereo matching of 2-D velocity vectors of two cameras, accurate calculation of 3-D velocity vectors by homogeneous coordinate system, removal of error vectors by a statistical method followed by a continuity equation criterion and so on. A delta wing model with or without LEX was immersed in a circulating water channel. Two high-resolution, high-speed digital cameras$(1280pixel\times1024pixel)$ were used to allow the time-resolved animation work. The present dynamic stereo PIV represents the complicated vortex behavior, especially, in terms of time-dependent characteristics of the vortices at given measuring sections. Quantities such as three velocity vector components, vorticity and other flow information can be easily visualized via the 3D time-resolved post-processing to make the easy understanding of the LEX effect or vortex emerging and collapse which are important phenomena occurring in the field of delta wing aerodynamics.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권2호
• /
• pp.264-270
• /
• 2011

본 연구는 직렬배열 상태에 놓인 3원주 주위의 유동장 특성을 PIV를 이용하여 파악한 것이다. 실험은 레이놀즈수 Re=$3.0{\times}10^3{\sim}5.0{\times}10^3$ 범위 내에서 수평간격비(P/D)를 P/D=1.25~3.75로 변화시켜가며 행하였다. 각각의 실험 파라메터에서 Strouhal 수, 와도변화, 순간 및 평균 속도벡터 및 속도분포를 측정하였으며 그 결과를 요약하면 다음과 같다. 3번째 원주 후방에서 측정한 Strouhal 수는 수평간격비 P/D에 따라 크게 3가지 영역으로 구분되며, 각 원주의 후류에서의 흐름 패턴은 이들 영역에 따라 달랐다. 각 원주 후방에서 시간평균 흐름은 거의 정체상태에 있었으며, 그 정체영역의 크기는 1번째, 2번째, 3번째 원주 순으로 작았다. 2번째 원주 전, 후방 영역에서는 받음각 미소 (${\alpha}= {\pm}5^{\circ}$)에 따라 서로 반대방향의 볼텍스가 형성했다.

• 한국추진공학회지
• /
• 제3권4호
• /
• pp.75-82
• /
• 1999

초음속 유동장치를 사용하여 제트 베인형 추력편향장치의 이론적 해석과 성능평가를 수행하였다. 현재 개발되었거나, 개발중인 제트 베인형 추력편향장치는 전술미사일이나 로켓의 공중발사, 함대발사, 수중발사 미사일과 고 고도 자세제어에 사용되고 있다. 저속도, 고 앙각의 비행시나 공기가 희박한 고 고도에서는 공력제어의 부족한 제어력을 향상시키기 위해 추력편향장치를 이용하여 추력 방향을 변경하고 제어력을 얻음으로써 방향 제어에 보다 월등한 성능을 발휘하는 것으로 알려져 있다. 제트 베인 방식의 추력편향장치는 고도와 주위환경에 관계없이 작동되며, 제트 베인 편향각 $30^{\circ}$ 까지 효과적인 성능을 발휘하여 발사 초기시 그 성능을 이상적으로 나타낸다. 따라서 본 연구에서는 자체 제작한 초음속유동장치의 성능시험 수행 및 노즐에서 발생되는 초음속 제트를 가시화하고, 2종의 제트 베인의 형상과 편향각에 따른 유동특성에 대해 조사하였다.

• 대한기계학회논문집B
• /
• 제29권6호
• /
• pp.737-746
• /
• 2005

The present study investigates heat/mass transfer and flow characteristics in a ribbed rotating passage with turning region. The duct has an aspect ratio (W/H) of 0.5 and a hydraulic diameter ($D_h$) of 26.67 mm. Rib turbulators are attached in the cross arrangement on the leading and trailing surfaces of the passage. The ribs have a rectangular cross section of $2\;mm\;(e){\times}\;mm\;(w)$ and an attack angle of $70^{\circ}$. The pitch-to-rib height ratio (p/e) is 7.5, and the rib height-to-hydraulic diameter ratio ($e/D_h$) is 0.075. The rotation number ranges from 0.0 to 0.20 while the Reynolds number is constant at 10,000. To verify the heat/mass transfer augmentation, internal flow structures are calculated for the same conditions using a commercial code FLUENT 6.1. The heat transfer data of the smooth duct for various Ro numbers agree well with not only the McAdams correlation but also the previous studies. The cross-rib turbulators significantly enhance heat/mass transfer in the passage by disturbing the main flow near the surfaces and generating one asymmetric cell of secondary flow skewing along the ribs. Because the secondary flow is induced in the first-pass and turning region, heat/mass transfer discrepancy is observed in the second-pass even for the stationary case. When the passage rotates, heat/mass transfer and flow phenomena change. Especially, the effect of rotation is more dominant than the effect of the ribs at the higher rotation number in the upstream of the second-pass.

• Advances in aircraft and spacecraft science
• /
• 제7권6호
• /
• pp.553-570
• /
• 2020

To address the problems caused by the strong coupling of an airbreathing hypersonic vehicle's airframe and propulsion to the integrated control system design, an integrated airframe-propulsion model is established, and the coupling characteristics between the aircraft and engine are analyzed. First, the airframe-propulsion integration model is established based on the typical nonlinear longitudinal dynamical model of an air-breathing hypersonic vehicle and the one-dimensional dual-mode scramjet model. Thrust, moment, angle of attack, altitude, and velocity are used as transfer variables between the aircraft model and the engine model. The one-dimensional scramjet model can accurately reflect the working state of the engine and provide data to support the coupling analysis. Second, owing to the static instability of the aircraft model, the linear quadratic regulator (LQR) controller of the aircraft is designed to ensure attitude stability and height tracking. Finally, the coupling relationship between the aircraft and the engine is revealed through simulation examples. The interaction between vehicle attitude and engine working condition is analyzed, and the influence of vehicle attitude on engine safety is considered. When the engine is in a critical working state, the attitude change of the aircraft will not affect the engine safety without considering coupling, whereas when coupling is considered, the attitude change of the aircraft may cause the engine unstart, which demonstrates the significance of considering coupling characteristics.

• Journal of Ship and Ocean Technology
• /
• 제10권4호
• /
• pp.12-23
• /
• 2006

In this paper, a numerical study is carried out to investigate the turbulent flow around a twin-skeg container ship model with rudders including propeller effects. A commercial CFD code, FLUENT is used with body forces distributed on the propeller disk to simulate the ship stem and wake flows with the propeller in operation. A multi-block, matching, structured grid system has been generated for the container ship hull with twin-skegs in consideration of rudders and body-force propeller disks. The RANS equations for incompressible fluid flows are solved numerically by using a finite volume method. For the turbulence closure, a Reynolds stress model is used in conjunction with a wall function. Computations are carried out for the bare hull as well as the hull with appendages of a twin-skeg container ship model. For the bare hull, the computational results are compared with experimental data and show generally a good agreement. For the hull with appendages, the changes of the stem flow by the rudders and the propellers have been analyzed based on the computed result since there is no experimental data available for comparison. It is found the flow incoming to the rudders has an angle of attack due to the influence of the skegs and thereby the hull surface pressure and the limiting streamlines are changed slightly by the rudders. The axial velocity of the propeller disk is found to be accelerated overall by about 35% due to the propeller operation with the rudders. The area and the magnitude of low pressure on the hull surface enlarge with the flow acceleration caused by the propeller. The propellers are found to have an effect on up to the position where the skeg begins. The propeller slipstream is disturbed strongly by the rudders and the flow is accelerated further and the transverse velocity vectors are weakened due to the flow rectifying effect of the rudder.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제4권2호
• /
• pp.141-150
• /
• 2012

Ship damage caused by maritime casualties leads to marine pollution and loss of life and property. To prevent serious damage from maritime casualties, several types of safety regulations are applied in ship design. Damage stability regulation is one of the most important safety issues. Designs of ships for long international voyages must comply with these regulations. Current regulations, however, do not consider the characteristics of the operating route of each ship and reflect only ship size and type of cargo. In this paper, a damage safety assessment was undertaken for a ship carrying radioactive waste in actual wave conditions. Damage cases for safety assessment were constructed on the basis of safety regulations and related research results. Hull form, internal arrangement, loading condition and damage condition were modeled for damage safety simulation. The safety simulation was performed and analyzed for 10 damage cases with various wave heights, frequency and angle of attack on an operating route. Based on evaluation results, a design alternative was generated, and it was also simulated. These results confirmed that damage safety analysis is highly important in the design stage in consideration of the operating route characteristics by simulation. Thus a ship designer can improve safety from damage in this manner.

• 한국음향학회지
• /
• 제38권3호
• /
• pp.302-307
• /
• 2019

현대 대잠전에 있어 잠수함에 대한 2차원 위치추정에 다양한 방법들이 있다. 잠수함에 대한 보다 효과적인 추적 및 공격을 위해 표적 심도는 매우 중요한 요소이다. 하지만 현재까지도 잠수함의 심도를 찾아낸다는 것은 어려운 일이다. 본 논문에서는 최단접근점(Closest Point of Approach, CPA) 전후의 표적 접촉방위와 표적 도플러 신호 등 다이파 소노부이 접촉정보를 이용한 잠수함 심도 추정 기법을 제안하고자 한다. 표적의 상대심도는 표적과 다이파 소노부이의 청음기 간 사선거리 및 수평거리에 피타고라스 정리를 적용하여 결정된다. 이때 사선거리는 도플러변이와 표적 속도에 의해서 계산되며, 수평거리는 표적에 대한 연속된 접촉방위와 표적의 이동거리에 삼각함수를 적용하여 얻을 수 있다. 본 논문에서 제시된 알고리즘의 성능은 소노부이-표적 간 수평거리 및 상대심도에 의해 결정되는 고각과 도플러 변이 값의 측정 정확성에 의해 좌우됨을 시뮬레이션을 통해 알 수 있다.

• Wind and Structures
• /
• 제33권6호
• /
• pp.463-470
• /
• 2021

This study investigates the aerodynamic characteristics of NACA series airfoil by altering the trailing edge in the form of extended and serrated sections. This contemporary advent examined NACA 0020 airfoil experimentally at the angle of attack ranging from 0° to 45° and for the Reynolds number of 2.46 × 105. To figure out the flow behaviour, the standard average pressure distribution over the airfoil surface is estimated with 50 pressure taps. The time series surface pressure is recorded for 700 Hz of sampling frequency. The extended trailing edge of 0.1 c, 0.2 c and 0.3 c are attached to the base airfoil. Further, the triangular serration is introduced with the base length of 2 cm, 4 cm and 6 cm. Each base length with three different amplitudes of 0.1 c, 0.2 c and 0.3 c were designed and equipped with the baseline case at the trailing edge and tested. The aerodynamic force coefficient, as well as pressure coefficient are presented. The obtained data advises that modification in the trailing edge will reflect the aerodynamic characteristics and the flow behaviour over the section of a wing. Resultantly, the extended trailing edge as a thin elongated surface attached to a base airfoil without revising the main airfoil favors good lift increment. The serrated trailing edge acts as a flow control device by altering the flow pattern results to delay the stall phenomenon. Besides it, improves lift co-efficient with less amount of additional drag. This extended and serrated trailing edge approach can support for designing the future smart airfoil.