• 대한기계학회논문집A
• /
• 제26권5호
• /
• pp.960-968
• /
• 2002

In this research, the effects of fiber stacking sequence on damage behaviors of FML(Fiber Metal Laminates) subject to indentation loading. SOP (Singly Oriented Ply) FML and angle ply FML were fabricated to study fiber orientation effects and angle ply effects. FML were fabricated by using 1050 aluminum laminate and carbon/epoxy prepreg. To increase adhesive bonding strength, Al laminate was etched using FPL methods. The static indentation test were conducted by using UTM under the 2side clamped conditions. During the tests, load and displacement curve and crack initiation and propagation behaviors were investigated. As fiber orientation angle increases, the crack initiation load of SOP FML increases because the stiffness induced by fiber orientation is increased. The penetration load of SOP FML is influenced by the deformation tendency and boundary conditions. However, the macro-crack of angle ply FML was initiated by fiber breakage of lower ply because angle plies in Angle ply FML prevents the crack growth and consolidation. The Angle ply FML has a critical cross-angle which prevent crack growth and consolidation. Damage behavior of Angle ply FML is changed around the critical cross-angle.

• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.229-240
• /
• 1991

본 연구에서 사용한 이론과 제시된 방법의 타당성을 검토하기 위하여 익열 간 극이 무한대인 단일 익형 주위의 유동장을, 최근에 개발된 계산방법인 Lambda방법을 사용한 Dadone의 해석결과와 비교하였고, 범용의 압축기 익형인 NACA65게열 익열 유동 에 대한 Herrig의 실험값, 그리고 미분해석에 의한 점성-비점성 상호작용 방법을 사용 한 Hansen의 계산값고, 이들 조건과 동일한 상태에서 본 연구에서 제시한 방법으로 계 산한 결과와 만족할 만한 일치를 얻었다.

• 대한족부족관절학회지
• /
• 제11권1호
• /
• pp.13-17
• /
• 2007

Purpose: In order to achieve successful outcome for the hallux valgus surgery, it is mandatory to consider the possible associated hallux valgus interphalangeus, and therefore the hallux interphalangeal angle (HIA) other than hallux valgus angle (HVA) and intermetatarsal angle (IMA) has been well appreciated. The purpose of this study is to evaluate the incidence of hallux interphalangeal angle in the normal and hallux valgus feet and also the statistical correlations of HIA with HVA and IMA in the 2 groups. Materials and Methods: The study is base on the standing foot AP radiographs of the 100 normal feet (HVA<$12^{\circ}$ and $IMA<9^{\circ}$) and 100 hallux valgus feet (HVA>$25^{\circ}$ and IMA>$12^{\circ}$). We measured the hallux valgus angle, intermetatarsal angle and hallux interphalangeal angle, where we defined the hallux valgus interphalangeus when the HIA was more than $10^{\circ}$. We evaluated the incidence of the hallux valgus interphalangeus in the normal and hallux valgus groups and the correlations of the HIA with HVA and IMA. Results: In normal feet group, hallux valgus interphalangeus comprised 82%, while there were only 20% of HVI in hallux valgus group. Among 200 total feet, there was negative correlations between the HVA and HIA as well as IMA and HIA statistically (p<0.01). Conclusion: There was lower incidence of hallux valgus interphalangeus in the hallux valgus group compared to the normal feet group.

• 한국정밀공학회지
• /
• 제3권3호
• /
• pp.30-39
• /
• 1986

The burr worsens the accuracy of a workpiece and decreases a lot of pro- ductivity because it takes so much time and efforts to remove it. In this paper, the height, thickness and size of a drilling burr were derived from the drilling variables of drill diameter, chisel edge angle, web rate =($\Frac{2{\times}\;web\;thickness}{drill\;dia}$) and yielding stress of the workpiece as wel as feed, point angle and helix angle. The theoretical and experimental values of drilling thrust, torque and burr size of the testpiece were analyzed with the method of numerical analysis in a standard drilling condition. The order of choosing the drilling variables for the purpose of controlling the burr size was dealt in this paper with burr forming ratio. The results are as follows: (1) The drill diameter forms 42 percents feed 25 percents point angle 23 percents and web rate, chisel edge angle and gelix angle 5 percents of the partial differential slope of drilling thrust within the usual available ranges of drilling variables. (2) The drill diameter forms 55 percents feed 26 percents web rate 9 percents and chisel edge angle, point angle and helix angle 10 percents of the par- tial differential slope of drilling torque in the usual available ranges of drilling variables. (3) About 70 percents of the burr size can be controlled by feed, 29 percents by web rate in the case of a fixed diameter. It is recommended drilling10 variables to be chosen in the order of feed, web rate, drill diameter, point angle, chisel edge angle and helix angle so as to control the burr size effectively.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제28권1호
• /
• pp.49-57
• /
• 2006

Mandibular fractures have higher incidence rate compared to facial bone fractures because of relatively prominent form. Specially, mandibular angle fractures were known as common fracture site because of morphological anatomic structure. The mandibular third molar appears to be the most frequent impacted tooth. The mandibular third molar have influence on mandibular angle fractures according to it's eruption state. Also, the mandibular angle fracture including the third molar may influence on post operative infection whether the third molar is in impacted or extracted state when reduction of fracture site is operated. The presence or absence and degree of impaction of the mandibular third molar were assessed for each patient and were related to the occurrence of the mandibular angle fracture. The extraction or non extraction of the mandibular third molar were related to the occurrence of the post operative infection in the reduction of mandibular angle fractures. In the presence of mandibular third molar, the possibility of mandibular angle fractures were relatively common. When viewing the mandibular third molar at occlusal plane, the possibility of mandibular angle fractures were high in the class C group. The possibility of mandibular angle fractures were high in the mesial angulation and partial impaction. There was a statistically significant difference(P<0.05). In complete erupted mandibular third molar, the possibility of post operative infection occurs quite often, but there was no statistical significant difference(P>0.05). In the extracted or non extracted of mandibular third molar, the post operative infection showed no statistical significant difference(P>0.05). With the results mentioned above, mandibular third molar was significantly more susceptible to mandibular angle fracture. In the reduction of mandibular angle fracture, it was recommended that mandibular third molar should be extracted especially in case of pericoronitis, periodontitis and other infections.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제29권4호
• /
• pp.226-231
• /
• 2003

The contour of mandibular angle is important for facial esthetics in the oriental population, because the wide and square face is thought to have had an unhappy life. A prominent mandibular angle produces a characteristics quardrangle, coase, and muscular appearance. So, uni- or bi-lateral mandibular angle reduction is usually performed. However, there is little guideline for bi-lateral angle reduction. So, this study was to investigate the pattern of Korean mandibular angle for bi-lateral mandibular angle reduction as guideline. This study was included 66 adult men and women over 19 years old who are having the normal mandibular angle. We measured the posterior border, angle, and inferior border of mandible using cephalometric view. The results of study was as followed : 1. The ratio of posterior mandible was 96.6, 97.3% in male, and 103.0, 106.0% in female. 2. The ratio of mandibular angle(R1-Go/R1-R2) was 120.2% in male, and 117.3% in female. 3. The ratio of inferior mandible(D5, 6, 7, E, F, G/D4) was 97.3, 90.9, 79.5, 65.2, 57.8, 46.9% in male, and 98.5, 91.2, 80.5, 67.6, 59.1, 50.2% in female. The results of this study should be useful to decide accurate amount of reduction.

• 대한정형도수물리치료학회지
• /
• 제20권2호
• /
• pp.15-20
• /
• 2014

Objective: The purpose of this study was to investigate the effects of sling exercise on the cervical lordotic angle, craniovertebral angle, and head rotation angle among adolescents in the forward head posture. Methods: The subjects include 22 adolescents that recorded a mild level or higher on the posture evaluation index by New York State. They were randomly divided to the hand exercise group (n=11) and the control group (n=11). The former group participated in the sling exercise program three times a week over four weeks in total with each session lasting 60 minutes, whereas the latter group was not included in the program. The cervical lordotic angle, craniovertebral angle, and head rotation angle were measured before and after the intervention. Results: The study compared the cervical lordotic angle between the two groups before and after sling exercise and found that the sling exercise group made an increase of $7.36^{\circ}$ from $21.91^{\circ}$ to $29.27^{\circ}$ after the intervention(p<.05). As for the comparison results of the craniovertebral angle, the sling exercise group made an increase of $5.64^{\circ}$ from $48.91^{\circ}$ to $54.55^{\circ}$ after the intervention (p<.05). As for the comparison results of the cranial-rotation angle, the sling exercise group made an decrease of $-7.73^{\circ}$ from $148.82^{\circ}$ to $141.09^{\circ}$ after the intervention (p<.05). The control group showed no differences before and after the intervention (p>.05). Conclusion: Those findings indicate that the application of sling exercise in the forward head posture can be a good program to maintain the right posture and improve or prevent an abnormal posture and raise a need for more clinical applications and ongoing researches.

• 한국전문물리치료학회지
• /
• 제10권1호
• /
• pp.63-76
• /
• 2003

This research was performed to compare spinal segment motion angle between low back pain (LBP) group and painless group during trunk flexion-extension and to investigate the effect of transversus abdominis strengthening exercise on spinal segment motion angle in LBP group. Nine subjects with LBP and ten subjects without LBP participated. Transversus abdominis strengthening exercise was performed in LBP group for three weeks, and spinal segment motion angles were compared before and after the exercise performance. Spinal segment motion angles were measured both in sitting and standing position. Results were as followed: 1) Subjects' average age was 24.79 years, height was 167.84 cm, and weight was 59.95 kg. 2) Spinal segment motion angle of T10/l1 was significantly higher in LBP group compared with painless group (p<.05) in sitting position during trunk flexion-extension. 3) In sitting position, whereas entire lumbar segment motion angles were lower in LBP group compared with painless group (p<.05), angle of L4/5 was higher in LBP group compared with painless group (p<.05). 4) There was no significant difference in thoracic segment motion angle in standing position. 5) After three weeks of transversus abdominis strengthening exercise, thoracic segment motion angle increased both in sitting and standing position (p<.05). 6) In painless group, there was no significant difference in entire spinal segment motion angles in sitting and standing position (p>.05). When spinal segment motion angles were compared between sitting and standing position, there were slight differences. In sitting position, there was no difference in spinal segment motion angle between LBP group and painless group while hip joint motion angle and sacral inclination angle of LBP group was lower than those of painless group (p<.05). In standing position, lumbar segment motion angle was significantly lower in LBP group than that of painless group. Transversus abdominis strengthening exercise influenced thoracic segment motion angle more significantly than lumbar segment motion angle.

• 한국컴퓨터정보학회논문지
• /
• 제16권9호
• /
• pp.155-162
• /
• 2011

레이더에서 목표물을 예측하기위해서 입사 방향 추정 방법을 사용한다. 본 논문에서는 적응 배열 입사 방향 방법과 단일 지향 오차 입사 방향 추정방법을 사용하여 목표물에 대한 입사방향을 추정하였다. 적응 배열 입사 방향 방법으로 주엽 재밍과 부엽 재밍을 제거하여 목표물에 대한 신호 입사 방향을 추정하였다. 단일 지향 방법은 신호 입사 방향의 지향오차가 크기 때문에 목표물의 정확한 추정은 어렵다. 원하는 목표 신호를 수신하기 위해서는신호의 입사 방향과 지향방향사이에 지향오차가 거의 없어야 한다. 입사 방향 추정시 공분산을 구하기 위해서 생기는 지연 시간문제와 단일 지향조건을 이용하여 발생하는 지향오차 문제를 감소시켰다. 본 논문에서는 시뮬레이션을 통하여 제안된 입사 방향 추정방법이 기존의 방법에 비해 목표물 추정면에서 우수함을 보인다.

• 대한치과교정학회지
• /
• 제28권6호
• /
• pp.937-946
• /
• 1998

전치부 개교를 동반하는 수직적으로 긴 안모는 임상교정에서 치료하기 어려운 증례중 하나이다. 이런 증례의 특징을 찾기 위한 많은 시도가 있었으나 골격 및 치성 요소에 대한 개별 파악이 이루어지지 않음으로써 일관된 설명 없이 혼돈 만 초래하게 되었을 뿐이다. .수직적으로 긴 안모의 두부방사선계측학적 륵징을 확인하기 위하여 Sn-GoGn 각에 따라 구분된 109개의 치료 전 두부방사선사진 (35 수직군, 37 평균군, 37 수평군)을 분석하여 비교한 결과 다음과 같은 결과를 발견하였다. 수직적으로 긴 안모일수록 전안모고경, 특히 하전안모고경이 증가하며 후안모고경은 짧아지고, 모든 치조골, 특히 상악에서 의 두께가 깊어진다. 또한 모든 골격적 각계측항목이 커지는데 특히 lower genial angle의 상관성이 컸다. 한편 상악 전치는 점점 설측경사되었고 하악 전치는 순측경사되는 경향을 보였다.