• Journal of Korean Physical Therapy Science
• /
• v.25 no.2
• /
• pp.7-14
• /
• 2018

Purpose: This study was conducted to analyze the effect of bag type on gait kinematic factors. The purpose of this study was to compare the Cobb's angle, leg angle and foot pressure difference according to bag type among 20 university students. Methods: The bag type was applied with two kinds of bags: not wearing a bag, backpack, and an eco bag. The bag weight was 10% of subjects weight in during experiment and only bag weight was 0.5kg. Results: Knee joint angle is increased when wearing backpack or an eco bag than not wearing bag. Cobb's angle increased when wearing backpack and wearing eco back. The difference in right and left foot pressure increased when wearing eco bag than not wearing bag and wearing backpack. Conclusion: Therefore, wearing a heavy backpack or an eco bag when walking for a long time may cause scoliosis and change the walking form.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.61-64
• /
• 1998

We have investigated the effects of ultraviolet (UV) light irradiation condition and imidization temperature for the generation of pretilt angle in nematic liquid crystal (NLC) on the two kinds of the polyimide (PI) surfaces. High pretilt angle of NLC is generated with oblique p-polarized UV light irradiation of 30$^{\circ}$ on PI surface for 20 min. Also, the high pretilt angle of NLC is generated with oblique p-polarized UV light irradiation of 10-30$^{\circ}$ on PI surface at 20min. The pretilt angle of NLC decreases with increasing the imidization temperature on all rubbed PI surfaces ; the pretilt angle of NLC with oblique p-polarized UV light irradiation of 30$^{\circ}$on PI surface decreases with increasing the imidization temperature. The high pretilt angle of NLC is observed due to high photo-depolymerization reaction by low surface energy at low imidization temperature. We suggest that the pretilt angle of NLC is strongly attributed to the photo-depolymerization reaction with the UV light irradiation condition and imidization temperature.

• The korean journal of orthodontics
• /
• v.21 no.1 s.33
• /
• pp.185-195
• /
• 1991

This study was undertaken to grope the correlation of the maximal bite force and tooth-craniofacial structure. The maximal bite force of 76 adult male, aged 18-28 (mean aged: $23.4{\pm}2.2$) years, was estimated and cephalometric headplates were measured, tabulated and statistically analyzed. The results were as follows. 1. 59.61kg of bite force in first molar, 45.38kg in premolar and 17.10kg in central incisor were arranged. 2. The bite force was negatively correlated to genial angle, mandibular plane angle, the angle between occlusal plane and mandibular plane, the angle between palatal plane and mandibular plane, and positively correlated to posterior height of face, length of mandibular body, length of ramus, facial depth in craniofacial structure. 3. The group with strong bite force showed small genial angle, mandibular plane angle, the angle between occlusal plane and mandibular plane, the angle between palatal plane and mandibular plane, and long posterior height of face, length of mandibular body, length of ramus, facial depth. So they manifested the tendency to brachycephalic pattern, on the other hand, the group with weak bite force manifested the tendency to dolichocephalic pattern. 4. There is no correlationships between bite force and mesial inclination of premolar axis in this subject. 5. It is considered bite force have an effect upon craniofacial pattern, especially upon the lower face.

• The korean journal of orthodontics
• /
• v.25 no.5 s.52
• /
• pp.627-634
• /
• 1995

The purpose of this study to analyze characteristics of soft tissue profile in Korean young adults. The sample consisted of 50 young adults (25 males and B females) who had pleasing and normal occlusion. Soft tissue analysis (facial convexity angle, nasolabial angle, H-angle, Z-angle, E-line to upper lip, lower lip, Sn-pog' to upper lip, lower lip) was performed on lateral cephlograms. Mem and standard deviation was obtained. When compared by other studies, mean profile of this sample was relatively straighter and both the upper and lower lips was more protrusive.

• Journal of ILASS-Korea
• /
• v.16 no.4
• /
• pp.201-209
• /
• 2011

Optimum engine performance is obtained when the spray characteristics is well matched to the geometry of a combustion chamber. Among many parameters governing the combustion performance in internal combustion engine, fuel supply characteristics and atomization are important performance factors. Therefore, spray characteristics of high pressure multi-hole injector has been studied experimentally. An experimental test system has been made to operate high pressure injection system and to visualize spray behavior. Spray visualization has been performed to analyze spray formation, spray cone angle, bent angle and penetration length. Spray interaction with piston has been analyzed with various injector installation angle, injection pressure and ambient pressure. Test results show that penetration length is greatly influenced by the injection pressure. Penetration length is decreased as ambient pressure increased. Spray cone angle is increased as injection pressure and ambient pressure increased. However, bent angle is not influenced by the change of injection pressure and ambient pressure. Spray cone angle distribution map is plotted using the experimental data. Fuel movement around the spark-plug has been enforced as increasing injector installation angle.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.559-562
• /
• 2003

The effect of pretilt angle on viewing characteristics of an IPS cell is discussed. We calculated optical viewing angle in the IPS cell as function of pretilt angle from $0.5^{\circ}$ to $4^{\circ}$, so that we could confirm that low pretilt angle was profitable for wider viewing property. In order to verify the calculation, we made an IPS cell with very low pretilt angle by the alignment method using ion beam exposure. In the experiment, we confirmed that wider viewing characteristics can be achieved if lower pretilt angle was applied in IPS mode. And Ion beam alignment method was useful for low pretilt creation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.116-119
• /
• 2004

In this paper, we have improved a novel (ECB) mode using tilt angle in the unique condition by hot-plate equipment. The new control of tilt angle for nematic liquid crystal (NLC) with negative and positive dielectric anisotropy on the rubbed homeotropic polyimide (PI) using baking method by Hot-plate equipment was investigated. LC tilt angle decreased with increasing baking temperature and time. Especially, the low LC tilt angle of positive type NLC $({\Delta}n>0)$ on the rubbed homeotropic PI surface by increasing temperature and time was measured. The EO characteristics of the novel ECB mode using control of tilt angle on the homeotropic surface than that of conventional OCB cell can be improved. We suggest that the developed the Novel ECB cell using control of tilt angle on the homeotropic surface is a promising technique for the achievement of a fast response time and a high contrast ratio.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.20 no.2
• /
• pp.9-14
• /
• 2014

Background: This study aims to examine correlations between quadriceps angle, lower extremity muscle strength and leg length discrepancy. Methods: This study selected 96 healthy women university students as the subjects of research. Quadriceps angle, lower extremity muscle strength and leg length discrepancy were measured. The statistical analysis of the data SPSS/window (version 12.0) were analyzed using the pearson correlation analysis. Results: There were negative correlations between the muscle strength of the right hamstring muscles and the right quadriceps angle in supine and standing positions. Functional leg length discrepancy of left and right quadriceps angle in supine and standing position showed positive correlations. Conclusions: The quadriceps angle affect the knee. An abnormal angle caused weakening of balance. Muscle strength, leg length discrepancy, and affected lower extremity alignment and knee function. These conclusions may prevent exercise limitation or disorders in the subjects and treating the patients with knee injury or patellofemoral pain syndrome with basic therapy intervention.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.3
• /
• pp.372-380
• /
• 2003

Impact tests were conducted to study the effect of angle ply and metal laminate on impact damage characteristics of Fiber Metal laminates (FML). Impact tests were conducted using drop weight impact machine and damage behavior were analyzed by comparing with load-displacement curve and surface observation and microscopic observation of cross sections. The effect of angle ply on impact characteristics of FML are influenced by property of metal laminate. i.e., when the metal laminate is not enough to strong to prevent fiber debonding, Angle ply FML is superior to singly oriented ply (SOP) FML because angle ply enhance the stiffness by fiber supports and prevent (rack propagation. However, when the metal laminate is enough to strong to prevent fiber debonding, SOP FML is superior to Angle ply FML because the fiber of lower ply in Angle ply FML are more stressed than that of SOP FML.

• The Journal of Korean Physical Therapy
• /
• v.26 no.2
• /
• pp.68-73
• /
• 2014

Purpose: The purpose of this study was to investigate the effect of closed kinetic chain exercise using EMG-biofeedback for selective training of the vastus medialis oblique on functional ability and Q-angle in subjects with patellofemoral pain syndrome. Methods: Thirty participants who met the criteria were included in this study. Participants were randomly allocated to the control group (Group I, n=10), closed kinetic chain exercise group (Group II, n=10), and closed kinetic chain exercise using EMG-biofeedback group (Group III, n=10). Intervention was performed in three groups, three times per week, for a period of six weeks. Kujala patellofemoral score and Q-angle were measured before and after the experiment. Results: Some significant differences in kujala patellofemoral score were observed in group II and group III, compared with group I (p<0.01). There was no significant difference on in Q-angle at knee flexion angle $0^{\circ}$. However, some significant differences in Q-angle at knee flexion $60^{\circ}$ were observed in group III, compared with group I (p<0.01). Conclusion: Closed kinetic chain exercise using EMG-biofeedback that provides real-time biometric information on selected muscles in order to increase the efficiency of treatment may be helpful in improvement of functional ability and Q-angle in patellofemoral pain syndrome.