• Journal of Wetlands Research
• /
• v.24 no.2
• /
• pp.83-92
• /
• 2022

The amount of the plastic waste has been increasing according to global demand for plastic. Microplastics are the most hazardous among all plastic pollutants due to their toxicity and unknown physicochemical properties. This study investigates the optimal methodology that can be applied to sewage samples for detecting microplastics before discussing reducing microplastics in MWTPs. In this study, the effect of different pretreatment methods while detecting microplastic analysis of MWTP influent samples was investigated; the samples were collected from the J sewage treatment plant. There are many pretreatment methods but two of them are widely used: Fenton digestion and hydrogen peroxide oxidation. Although there are many pretreatment methods that can be applied to investigate microplastics, the most widely used methods for sewage treatment plant samples are Fenton digestion and H₂O₂ oxidation. For each pretreatment method, there were factors that could cause an error in the measurement. To overcome this, in the case of the Fenton digestion pretreatment, it is recommended to proceed with the analysis by filtration instead of the density separation method. In the case of the H₂O₂ oxidation method, the process of washing with distilled water after the reaction is recommended. As a result of the analysis, the concentration of microplastics was measured to be 2.75ea/L for the sample using the H₂O₂ oxidation method and 3.2ea/L for the sample using the Fenton oxidation method, and most of them were present in the form of fibers. In addition, it is difficult to guarantee the reliability of measurement results from quantitative analysis performed via microscope with eyes. A calibration curve was created for prove the reliability. A total of three calibration curves were drawn, and as a result of analysis of the calibration curves, all R² values were more than 0.9. This ensures high reliability for quantitative analysis. The qualitative analysis could determine the series of microplastics flowing into the MWTP, but could not confirm the chemical composition of each microplastic. This study can be used to confirm the chemical composition of microplastics introduced into MWTP in the future research.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.1
• /
• pp.1-12
• /
• 2016

This study is to make the liquid crystalline structure using sucrose distearate (Sucro-DS) emulsifier to create the hydrophilic type oil-in-water (O/W) emulsion, the droplets of the emulsion having a structure of a multi-lamellar structure. We have studied the physicochemical properties of Sucro-DS using those techniques. And it has been studied in the emulsion performance. In order to form the liquid crystalline structure applying 3 wt% of Sucro-DS, 5 wt% of glycerin, 5 wt% of squalane, 5 wt% of capric/caprylic triglyceride, 3wt% of cetostearyl alcohol, 1wt% of glyceryl mono-stearate, 78 wt% of pure water in mixture having the lamellar structure of stable multi-layer system was found to formed. By applying them, they were described how to create an unstable active material encapsulated cream. Further, the moisturizing cream was studied using this technique. It reported the results to the skin improvement effect by the human clinical trials. The pH range to produce a stable liquid crystal phase using a Sucro-DS was maintained in 5.2~7.5. In order to increase the stability of the liquid crystal, it was when behenyl alcohol containing 3 wt%, the hardness at this time was 13 kg/mm,min. Viscosity of the same amount was 25,000mPas/min. After a test for the effects of the emulsions, the concentration of 6 wt% Sucro-DS is that was appropriate, the particle size of the liquid crystal was 4~6mm. It was observed through a microscope analysis, reliability of the liquid crystal changes for 3 months was found to get stable at each $4^{\circ}C$, $25^{\circ}C$ and $45^{\circ}C$. In clinical trial test, before applying a moisturizing effect it was $13.4{\pm}7%$. Moisturizing cream liquid crystal was not formed in $14.5{\pm}5%$. Therefore, applying than ever before could see the moisture about 8.2% was improved. On the other hand, it was the moisturizing effect of the liquid cream is $19.2{\pm}7%$. The results showed that 43.3% improvement than that previously used. Applications fields, Sucro-DS emulsifier used liquid cream, lotion, eye cream and a variety of formulations can be developed, as well as the cosmetics industry is expected to be wide fields in the application of the external preparation for skin emulsion technology in the pharmaceutical industry and pharmaceutical industry.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.12
• /
• pp.1347-1352
• /
• 2005

[ $H_2S$ ] removal reaction using $Li_2ZrO_3/honeycomb$ has been carried out in a fixed bed reactor for the cleaning of syngas from the waste gasifier. $Li_2ZrO_3$ was synthesised using reagent-grade $Li_3CO_3$ and $ZrO_2$ with suitable amount of ethanol in a 1:1 ratio. And then $Li_2ZrO_3$ were calcined in air at $850{\sim}1000^{\circ}C$ for 14 h. The optimum condition of $H_2S$ removal reaction is around 20 wt% $Li_2ZrO_3$/honeycomb at 300 mL/min and $700^{\circ}C$. At this condition, removal amount of $H_2S$ was about 0.337 $g^{H_2S}/g^{sorbent}$. Addition of $K_2CO_3$, $Na_2CO_3$, NaCl and LiCl in the $Li_2ZrO_3$ remarkably improves the $H_2S$ removal capacity of modified $Li_2ZrO_3$/honeycomb up to 23%. Analyses of $Li_2ZrO_3/honeycomb$ sorbent by SEM and XRD showed that $Li_2ZrO_3$ was uniformly impregnated into honeycomb up to considerable amounts. Furthermore, the physicochemical properties of the sorbent did not vary much up to $1000^{\circ}C$.

• the MEAT Journal
• /
• s.36 summer
• /
• pp.72-86
• /
• 2009

Microbial reduction, physicochemical property, and sensory evaluation of irradiated beef patty were investigated. The microbial counts of refrigerated beef patty were reduced to below the number of 3 logs after irradiation at 3 kGy. But no viable microorganism was detected in frozen beef patty irradiated at 3 kGy. Food additives such as nitrite, salt, phosphate and ascorbic acid did not affect on the inactivation of microorganism by irradiation. The irradiation effect on the water holding capacity was not significant, but frozen irradiated beef patty showed higher water holding capacity than refrigerated beef patty. The drip loss of irradiated beef patty did not show significant differences according to irradiation doses. Considering the influence of food additives, the irradiated beef patty mixed with salt and phosphate showed lower drip loss than that without food additives. In refrigerated beef patty, TBARS values were increased with increase of irradiation doses and showed lower values in the beef patty mixed with food additives than that without food additives. The redness of refrigerated beef patty showed highest values at 3 kGy of irradiation and then decreased with increasing irradiation doses, while in the frozen beef patty did not show distinct tendency according to the irradiation doses or food additives. In sensory evaluation. the irradiated beef patty showed unpleasant smell as compared with the non irradiated beef patty, but showed somewhat higher score in smell at the sample contained ascorbic acid regardless of irradiation doses.

• Food Science and Preservation
• /
• v.14 no.4
• /
• pp.414-418
• /
• 2007

The physicochemical characteristics and sensory properties of Deodeok wine, formed by leaching of Deodeok at room temperature for 180 days, were investigated over the following range of Deodeok levels: 10, 15 and 20% (all w/v). The higher the level of Deodeok, the greater were the final values of total sugars, reducing sugars, total polyphenols, and crude saponins. The Hunter's b-value (yellowness) of Deodeok wine varied markedly with Deodeok levels, and yellowness was highest in Deodeok wine containing 20% (w/v) Deodeok. Non-volatile compounds, that form the basis of the liquor tax law, were 0.64, 1.38 and 2.11% (all w/v), respectively, at day 160. Of these values, that of 2.11% (w/v), the level of non-volatile compounds in Deodeok wine containing 20% (w/v) Deodeok, was in accord with the liquor tax law (that requires this figure to be 2.0%). Sensory evaluation showed that Deodeok wine containing 20% (w/v) Deodeok was superior to the other wines tested.

• Food Science of Animal Resources
• /
• v.28 no.4
• /
• pp.437-444
• /
• 2008

Microbial reduction, physicochemical property, and sensory evaluation of irradiated beef patty were investigated. The microbial counts of refrigerated beef patty were reduced to below the number of 3 logs after irradiation at 3 kGy. But no viable microorganism was detected in frozen beef patty irradiated at 3 kGy. Food additives such as nitrite, salt, phosphate and ascorbic acid did not affect on the inactivation of microorganism by irradiation. The irradiation effect on the water holding capacity was not significant, but frozen irradiated beef patty showed higher water holding capacity than refrigerated beef patty. The drip loss of irradiated beef patty did not show significant differences according to irradiation doses. Considering the influence of food additives, the irradiated beef patty mixed with salt and phosphate showed lower drip loss than that without food additives. In refrigerated beef patty, TBARS values were increased with increase of irradiation doses and showed lower values in the beer patty mixed with food additives than that without food additives. The redness of refrigerated beef patty showed highest values at 3 kGy of irradiation and then decreased with increasing irradiation doses, while in the frozen beef patty did not show distinct tendency according to the irradiation doses or food additives. In sensory evaluation, the irradiated beef patty showed unpleasant smell as compared with the non irradiated beef patty, but showed some-what higher score in smell at the sample contained ascorbic acid regardless of irradiation doses.

• Food Science and Preservation
• /
• v.16 no.5
• /
• pp.686-698
• /
• 2009

We sought basic data for product development and storage improvement of abalone. We explored drying methodologies, such as shade drying, cold air drying, and vacuum freeze drying. We also examined various physicochemical features of both meat and viscera. Raw abalone meat had $78.88{\pm}1.01%$ moisture, $9.24{\pm}0.27%$ crude protein, and $10.05{\pm}0.81%$ carbohydrate (all w/w). The moisture level of dried abalone meat was highest after cold air drying, at $18.38{\pm}0.91%$, and lowest after vacuum freeze drying, at $1.05{\pm}0.05%$. The total amino acid content of raw abalone meat was $17,124.05{\pm}493.18\;mg%$, and fell after shade-drying to $12,969.92{\pm}583.65\;mg%$, and to $13,328.78{\pm}653.11\;mg%$ after cold air drying. The total free amino acid content of raw abalone meat was $4,261.99{\pm}106.55\;mg%$, and rose after shade-drying to $6,336.50{\pm}285.15\;mg%$, to $5,072.04{\pm}248.53\;mg%$ after cold air drying, and to $4,638.85{\pm}218.03\;mg%$ after vacuum freeze drying. The fatty acid proportions in raw abalone meat were $47.00{\pm}0.99%$ saturated, $22.18{\pm}1.05%$ monounsaturated, and $30.82{\pm}1.45%$ polyunsaturated. In the viscera, however, the proportions were $36.72{\pm}0.74%$ saturated, $25.44{\pm}1.12%$ monounsaturated, and $37.84{\pm}1.67%$ polyunsaturated. The contents of chondroitin sulfate in raw abalone were $11.95{\pm}0.35%$ in meat and $7.71{\pm}0.19%$ in viscera (both w/w). After shade-drying, the chondroitin sulfate content was $16.57{\pm}0.90%$ in meat and $9.24{\pm}0.50%$ in viscera. The figures after cold air drying were $16.17{\pm}0.79%$ and $12.44{\pm}0.61%$, and those after vacuum freeze drying $25.17{\pm}1.16%$ and $15.22{\pm}0.70%$ (thus including the highest meat content). The level of collagen in raw abalone was $69.80{\pm}3.07\;mg/g$ in meat and $40.62{\pm}1.79\;mg/g$ in viscera. Meat and viscera dried in the shade had $144.05{\pm}7.78\;mg/g$ and $44.16{\pm}2.39\;mg/g$ collagen, respectively, whereas the figures after cold air drying were $133.29{\pm}6.53\;mg/g$ and $69.20{\pm}3.39\;mg/g$, and after vacuum freeze drying $137.51{\pm}6.33\;mg/g$ and $60.61{\pm}2.79\;mg/g$. Volatile basic nitrogen values of raw abalone showed a higher content in viscera, at $19.01{\pm}0.84\;mg%$, compared to meat ($10.10{\pm}0.44\;mg%$). The value for shade-dried abalone meat was $136.77{\pm}7.37\;mg%$ and that of viscera $197.97{\pm}10.69\;mg%$. After cold air drying the meat and visceral values were $27.32{\pm}1.34\;mg%$ and $71.37{\pm}3.50\;mg%$, respectively.

• Economic and Environmental Geology
• /
• v.56 no.2
• /
• pp.125-138
• /
• 2023

Most of previous cesium (Cs) sorbents have limitations on the treatment in the large-scale water system having low Cs concentration and high ion strength. In this study, the new Cs sorbent that is eco-friendly and has a high Cs removal efficiency was developed by improving the coal mine drainage treated sludge (hereafter 'CMDS') with the addition of Na and S. The sludge produced through the treatment process for the mine drainage originating from the abandoned coal mine was used as the primary material for developing the new Cs sorbent because of its high Ca and Fe contents. The CMDS was improved by adding Na and S during the heat treatment process (hereafter 'Na-S-CMDS' for the developed sorbent in this study). Laboratory experiments and the sorption model studies were performed to evaluate the Cs sorption capacity and to understand the Cs sorption mechanisms of the Na-S-CMDS. The physicochemical and mineralogical properties of the Na-S-CMDS were also investigated through various analyses, such as XRF, XRD, SEM/EDS, XPS, etc. From results of batch sorption experiments, the Na-S-CMDS showed the fast sorption rate (in equilibrium within few hours) and the very high Cs removal efficiency (> 90.0%) even at the low Cs concentration in solution (< 0.5 mg/L). The experimental results were well fitted to the Langmuir isotherm model, suggesting the mostly monolayer coverage sorption of the Cs on the Na-S-CMDS. The Cs sorption kinetic model studies supported that the Cs sorption tendency of the Na-S-CMDS was similar to the pseudo-second-order model curve and more complicated chemical sorption process could occur rather than the simple physical adsorption. Results of XRF and XRD analyses for the Na-S-CMDS after the Cs sorption showed that the Na content clearly decreased in the Na-S-CMDS and the erdite (NaFeS₂·2(H₂O)) was disappeared, suggesting that the active ion exchange between Na⁺ and Cs⁺ occurred on the Na-S-CMDS during the Cs sorption process. From results of the XPS analysis, the strong interaction between Cs and S in Na-S-CMDS was investigated and the high Cs sorption capacity was resulted from the binding between Cs and S (or S-complex). Results from this study supported that the Na-S-CMDS has an outstanding potential to remove the Cs from radioactive contaminated water systems such as seawater and groundwater, which have high ion strength but low Cs concentration.

• Economic and Environmental Geology
• /
• v.55 no.4
• /
• pp.377-388
• /
• 2022

Laboratory-scale experiments were performed to identify the As removal mechanism of the residual slag generated after the mineral carbonation process. The residual slags were manufactured from the steelmaking slag (blast oxygen furnace slag: BOF) through direct and indirect carbonation process. RDBOF (residual BOF after the direct carbonation) and RIBOF (residual BOF after the indirect carbonation) showed different physicochemical-structural characteristics compared with raw BOF such as chemical-mineralogical properties, the pH level of leachate and forming micropores on the surface of the slag. In batch experiment, 0.1 g of residual slag was added to 10 mL of As-solution (initial concentration: 203.6 mg/L) titrated at various pH levels. The RDBOF showed 99.3% of As removal efficiency at initial pH 1, while it sharply decreased with the increase of initial pH. As the initial pH of solution decreased, the dissolution of carbonate minerals covering the surface was accelerated, increasing the exposed area of Fe-oxide and promoting the adsorption of As-oxyanions on the RDBOF surface. Whereas, the As removal efficiency of RIBOF increased with the increase of initial pH levels, and it reached up to 70% at initial pH 10. Considering the PZC (point of zero charge) of the RIBOF (pH 4.5), it was hardly expected that the electrical adsorption of As-oxyanion on surface of the RIBOF at initial pH of 4-10. Nevertheless it was observed that As-oxyanion was linked to the Fe-oxide on the RIBOF surface by the cation bridge effect of divalent cations such as Ca²⁺, Mn²⁺, and Fe²⁺. The surface of RIBOF became stronger negatively charged, the cation bridge effect was more strictly enforced, and more As can be fixed on the RIBOF surface. However, the Ca-products start to precipitate on the surface at pH 10-11 or higher and they even prevent the surface adsorption of As-oxyanion by Fe-oxide. The TCLP test was performed to evaluate the stability of As fixed on the surface of the residual slag after the batch experiment. Results supported that RDBOF and RIBOF firmly fixed As over the wide pH levels, by considering their As desorption rate of less than 2%. From the results of this study, it was proved that both residual slags can be used as an eco-friendly and low-cost As remover with high As removal efficiency and high stability and they also overcome the pH increase in solution, which is the disadvantage of existing steelmaking slag as an As remover.

• Korean Journal of Food Science and Technology
• /
• v.48 no.2
• /
• pp.133-141
• /
• 2016

The physicochemical properties, antioxidant capacities, and sensory optimization of taro (Colocasia esculenta) under different aging conditions were investigated to develop black taro. Black taro was processed in three steps (steaming: $95{\pm}3^{\circ}C$ for 1 h; aging: 85, 90, $95^{\circ}C$ for 20, 40, and 60 h; drying: $60^{\circ}C$ for 24 h) and ground into a powder for all experiments. Black taro showed an increased crude fiber content and browning index compared to raw taro. Calcium oxalate contents, reducing sugar contents, moisture contents, and lightness values were decreased during the processing of taro. Improvements in total polyphenol content and antioxidant activity (DPPH, ABTS, FRAP) were observed in the black taro samples aged at higher temperature. Response surface methodology was used for sensory optimization, and the optimum aging conditions with the highest acceptance values were found to be $88.73^{\circ}C$ for 39.50 h for taste, and $88.82^{\circ}C$ for 42.60 h for overall acceptance.