• 한국산학기술학회논문지
• /
• 제20권3호
• /
• pp.35-42
• /
• 2019

회분식 축합반응에 의하여 폴리에스터 수지를 제조하는 중 소규모 화학 공장에 대하여 공정안전관리제도 (PSM)의 시행에 활용되는 위험성평가 방법들 중의 하나인 K-PSR 기법을 이용하여 위험성 평가 및 분석을 진행하였다. K-PSR 기법은 중 소규모 화학공장에 대한 위험성 재평가 시에 나타나는 인프라 부족에 의한 어려운 점을 보완하기 위하여 KOSHA에서 개발한 위험성 평가 기법이다. K-PSR 기법을 적용하기 위하여 선택된 화학 공장의 전체 공정을 축합반응공정과 희석/여과 공정의 2 개의 검토구간을 설정하고, 이에 대한 4가지 가이드워드(누출, 화재 폭발, 공정 트러블, 및 상해)를 기초로 하여 공정상의 잠재위험을 찾아내어 분류하였다. 연구의 결과로서, 위험도 등급을 고려한 안전조치로는 첫째, 누출 및 화재 폭발의 잠재 위험성을 예방하기 위한 구체적인 조치로서는 노후설비에 대한 비파괴 검사 및 전기설비의 LOTO 절차서의 마련이 반드시 필요한 것으로 확인되었다. 둘째, 열매체 공급 배관에는 압력계 및 온도계를 설치하여 공정 트러블을 최소화하고, 마지막으로 국소배기장치를 설치하여 잠재적인 상해를 예방해야 함을 알 수 있었다.

• 해양환경안전학회지
• /
• 제25권4호
• /
• pp.468-475
• /
• 2019

엔드라인 폭연방지기는 수직 환기장치에 폭연방지와 함께 대기방출을 하도록 한다. 엔드라인 폭연방지장치는 선박과 같은 산업현장의 다양한 분야에 적용된다. 폭연방지기에서 스프링은 스프링 부하와 스프링의 탄성이 후드 개방 모멘트를 결정하므로 필수 부품이다. 더욱이, 장치 내 스프링은 고온의 상태에서도 작동해야 한다. 따라서, 폭연이 나타나기 시작할 때 스프링의 기계적 하중과 탄성을 분석할 필요가 있다. 이 연구에서는 엔드라인 폭연방지기의 작동 프로세스의 시뮬레이션을 기반으로 열 및 구조해석을 수행하으며, 스프링의 3차원 모델은 CFD 시뮬레이션을 이용하였다. CFD 해석은 FEM 시뮬레이션 값을 입력하여 스프링 구조를 분석한다. 본 연구에서는 스프링 부하의 43 kg, 93 kg 및 56 kg 세 가지 경우 즉, 150 mm 스프링 디플렉션에 부합하도록 집중적으로 관찰하였다. 결과적으로, $1,000^{\circ}C$ 가열조건 하에서 5분 후에 스프링 부하가 10 kg 감소했다. 시뮬레이션 결과는 연소 시간 변화에 따라 스프링의 부하와 탄성을 예측하고 추정할 수 있었다. 또한, 연구의 결과는 폭연방지기의 제조자들에게 역화방지장치뿐만 아니라 스프링의 설계를 최적화하기 위한 참고 자료로 활용할 수 있다.

• 스마트미디어저널
• /
• 제8권3호
• /
• pp.70-79
• /
• 2019

사용자 기대에 부응하는 UX 디자인 구현 여부가 스마트 가전의 차별화를 결정짓는 중요 변수가 되었다. 본 연구는 스마트 가전의 모바일 애플리케이션 개발과정에서 UX 디자인 평가 문제를 다루었다. 최근 수요가 급증하고 있는 <스마트 레인지 후드>의 모바일 애플리케이션에 대한 UX 디자인 평가 내용을 실험연구 대상으로 설정하였다. 연구목적은 스마트 가전 애플리케이션의 UX 디자인 사용자 평가 방법의 의의를 탐색하고 더불어 정량적 정성적 평가 방법의 혼용이 UX 디자인 개발 과정에 어떻게 도움이 되는지를 제안하는 것이다. 주요 발견점은 다음과 같다. 첫째, 사용자 평가를 통해 UX 디자인 개선 방향이 구체화될 수 있음을 발견하였다. UX 디자인 개발 과정에서 사용자 평가가 실질적으로 도움이 됨을 확인하였다. 둘째, UX 디자인 평가에서 '정량적 방법'과 '정성적 방법'의 혼용이 상호 보완적으로 효과가 있음을 발견하였다. 연구 시사점은 다음과 같다. UX 디자인 평가 과정에서 정량평가와 정성평가의 역할을 구분하여 접근하면 효율적이다. 예컨대, '허니콤 모델' 등의 정량평가를 통해 <사용자 경험 촉진/저해 발생 속성>을 '탐색적'으로 파악하고, '사용자 심층 인터뷰' 등의 정성평가를 통해 <사용자 경험촉진/저해 발생 속성 가운데 구체적인 서비스 기능 문제 요소>를 '측정'하고 '검증'하는 것이 가능하다.

• 한국가스학회지
• /
• 제16권4호
• /
• pp.52-58
• /
• 2012

최근 대기환경규제의 강화로 화학공장에서 발생하는 폐가스를 소각 처리하는 경우가 증대되고 있다. 이러한 소각설비는 저장탱크 상부와 배관을 통해 연결되어 화염을 통하여 폐가스를 연소 소각시키기 때문에, 배관을 따라 화염이 역화될 경우에는 치명적인 사고로 연결될 수 있다. 본 연구는 아크릴산 제조공정의 소각시스템에서 발생한 중대산업사고에 대해 폭발의 3요소와 화염의 전파 원인을 분석하여 사고 예방대책 및 안전성 향상 방안을 다음과 같이 제시하였다. 첫째, 소각시스템의 송풍기를 재 가동하기 전에는 공기 또는 불활성 가스로 충분히 희석하여 폭발을 예방하여야 한다. 둘째, 폭굉으로 전이된 화염이 저장탱크로 전파되지 않도록 소각설비의 전단 및 저장탱크 상부에 폭굉용 화염방지기를 설치하는 것이 필요하다. 섯째, 폭연용 화염방지기를 그대로 사용할 경우에는 그 전단에 파열판을 설치하거나 저장탱크 상부와 소각설비의 배관을 후드식으로 연결하여 폭굉으로 전이된 화염을 저장탱크 밖으로 분출시켜야 한다. 마지막으로, 소각설비에 연결된 송풍기의 제어반(MCC)에 순간정전 보상장치인 시간지연계전기(TDR: time delay relay)등을 설치하여 순간정전 후에도 자동으로 재가동될 수 있도록 조치해야 한다.

• 한국산학기술학회논문지
• /
• 제19권11호
• /
• pp.506-512
• /
• 2018

가정과 요식업 사업장에서 발생하는 미세먼지는 전체 미세먼지 배출량의 약 4%정도로 낮은 비율을 차지하고 있다. 하지만 요식업 사업장에서는 일시적 미세먼지 농도가 최대 60배 가까이 측정될 만큼 오염농도의 변화율이 매우 높다. 비산업 연소 사업장에서 발생하는 오염 물질은 입자상 미세먼지와 가스상 유기화합물로 구성되며, 이 오염물질을 제거하기 위해서 여러 집진원리 중 가스상 물질과 입자상 물질의 동시 제거에 효과적인 시스템인 세정집진을 적용하였다. 이는 이류체 분무 노즐을 이용한 가압수식 액체 분사 방법으로 브라운 운동의 확산 포집의 확률을 높인 방법이다. 제작된 미세먼지 제거 장치를 이용하여 노즐 분무 기압 조건과 각도 등에 따른 미세먼지 집진 시스템의 집진 효율성을 분석하였으며, 그 결과 미세먼지와 가스상 유기화합물 제거효율이 90% 이상을 만족하는 것을 확인하였다. 개발된 시스템은 기존 사업장 후드 시스템에 별도의 설치비용 없이 미세먼지 집진 제거가 가능하여 향후 높은 활용성이 기대된다.

• 대한지역사회작업치료학회지
• /
• 제4권2호
• /
• pp.1-10
• /
• 2014

목적 : 뇌졸중 환자를 대상으로 부엌 환경에 대한 개선 요구도, 부엌 디자인 선호도, 부엌에 필요한 물품 선호를 알아보고자 하였다. 연구방법 : 부산 지역의 병원에서 재활치료를 받고 있는 뇌졸중 환자 97명을 대상으로 2014년 2월 24일부터 3월 13일까지 설문조사를 실시하여 빈도분석을 하였다. 결론 : 부엌환경에 대한 개선 요구에서 작업할 수 있는 의자 사용, 미끄럼방지 타일의 설치에 대한 요구가 높았다. 부엌 디자인 선호 조사에서는 미끄럼방지 매트, 난방설비의 보일러, 서랍식 수납, L자형 안전손잡이, 높낮이 조절이 되는 싱크대, 가스누출 자동차단기, 터치식 수도꼭지, ㄷ자형 주방, 환기시설은 천장형 후드를 선호하는 것으로 나타났다. 부엌에 필요한 물품 선호에서는 내려오는 싱크대 선반, 채 썰기 가위, 손 다침 방지 칼을 선호하였다. 결론 : 뇌졸중 환자의 부엌환경에 대한 선호를 알 수 있었으며 이는 향후 뇌졸중 환자의 부엌 사용의 자립도, 낙상 예방 및 주방용품의 안전성과 편리성이 고려된 부엌 설계에 도움이 될 것으로 보인다.

• 설비공학논문집
• /
• 제22권7호
• /
• pp.492-507
• /
• 2010

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2009. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of general thermal and fluid flow, fluid machinery and piping, and new and renewable energy. Various topics were covered in the field of general thermal and fluid flow such as an expander, a capillary tube, the flow of micro-channel water blocks, the friction and anti-wear characteristics of nano oils with mixtures of refrigerant oils, etc. Research issues mainly focused on the design of micro-pumps and fans, the heat resistance reliability of axial smoke exhaust fans, and hood systems in the field of fluid machinery and piping. Studies on ground water sources were executed concerning two well type geothermal heat pumps and multi-heat pumps in the field of new and renewable energy. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included the heat transfer in thermoelectric cooling systems, refrigerants, evaporators, dryers, desiccant rotors. In the area of industrial heat exchangers, researches on high temperature ceramic heat exchangers, plate heat exchangers, frosting on fins of heat exchangers were performed. (3) In the field of refrigeration, papers were presented on alternative refrigerants, system improvements, and the utilization of various energy sources. Refrigeration systems with alternative refrigerants such as hydrocarbons, mixed refrigerants, and $CO_2$ were studied. Efforts to improve the performance of refrigeration systems were made applying various ideas of suction line heat exchangers, subcooling bypass lines and gas injection systems. Studies on heat pump systems using unutilized energy sources such as river water, underground water, and waste heat were also reported. (4) Research trend in the field of mechanical building facilities has been found to be mainly focused on field applications rather than performance improvements. In the area of cogeneration systems, papers on energy and economic analysis, LCC analysis and cost estimating were reported. Studies on ventilation and heat recovery systems introduced the effect on fire and smoke control, and energy reduction. Papers on district cooling and heating systems dealt with design capacity evaluation, application plan and field application. Also, the maintenance and management of building service equipments were presented for HVAC systems. (5) In the field of architectural environment, various studies were carried to improve indoor air quality and to analyze the heat load characteristics of buildings by energy simulation. These studies helped to understand the physics related to building load characteristics and to improve the quality of architectural environment where human beings reside in.

• 설비공학논문집
• /
• 제28권6호
• /
• pp.256-268
• /
• 2016

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2015. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering were carried out in the areas of flow, heat and mass transfer, cooling and heating, and air-conditioning, the renewable energy system and the flow inside building rooms. Research issues dealing with air-conditioning machines and fire and exhausting smoke were reduced. CFD seems to be spreading to more research areas. (2) Research works on heat transfer area were carried out in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the economic analysis of GHG emission, micro channel heat exchanger, effect of rib angle on thermal performance, the airside performance of fin-and-tube heat exchangers, theoretical analysis of a rotary heat exchanger, heat exchanger in a cryogenic environment, the performance of a cross-flow-type, indirect evaporative cooler made of paper/plastic film. In the area of pool boiling and condensing, the bubble jet loop heat pipe was studied. In the area of industrial heat exchangers, researches were performed on fin-tube heat exchanger, KSTAR PFC and vacuum vessel at baking phase, the performance of small-sized dehumidification rotor, design of gas-injection port of an asymmetric scroll compressor, effect of slot discharge-angle change on exhaust efficiency of range hood system with air curtain. (3) In the field of refrigeration, various studies were carried in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, a cold-climate heat pump system, $CO_2$ cascade systems, ejector cycles and a PCM-based continuous heating system were investigated. In the alternative refrigeration/energy system category, a polymer adsorption heat pump, an alcohol absorption heat pump and a desiccant-based hybrid refrigeration system were investigated. In the system control category, turbo-refrigerator capacity controls and an absorption chiller fault diagnostics were investigated. (4) In building mechanical system research fields, eighteen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the user and location awareness technology applied dimming lighting control system, the lighting performance evaluation for light-shelves, the improvement evaluation of air quality through analysis of ventilation efficiency and the evaluation of airtightness of sliding and LS window systems. The subjects of building energy were worked on the energy saving estimation of existing buildings, the developing model to predict heating energy usage in domestic city area and the performance evaluation of cooling applied with economizer control. The studies were also performed related to the experimental measurement of weight variation and thermal conductivity in polyurethane foam, the development of flame spread prevention system for sandwich panels, the utilization of heat from waste-incineration facility in large-scale horticultural facilities.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제32권4호
• /
• pp.299-305
• /
• 2010

Purpose: Adipose tissue is located beneath the skin, around internal organs, and in the bone marrow in humans. Its main role is to store energy in the form of fat, although it also cushions and insulates the body. Adipose tissue also has the ability to dynamically expand and shrink throughout the life of an adult. Recently, it has been shown that adipose tissue contains a population of adult multipotent mesenchymal stem cells and endothelial progenitor cells that, in cell culture conditions, have extensive proliferative capacity and are able to differentiate into several lineages, including, osteogenic, chondrogenic, endothelial cells, and myogenic lineages. Materials and Methods: This study focused on endothelial cell culture from the adipose tissue. Adipose tissues were harvested from buccal fat pad during bilateral sagittal split ramus osteotomy for surgical correction of mandibular prognathism. The tissues were treated with 0.075% type I collagenase. The samples were neutralized with DMEM/and centrifuged for 10 min at 2,400 rpm. The pellet was treated with 3 volume of RBC lysis buffer and filtered through a 100 ${\mu}m$ nylon cell strainer. The filtered cells were centrifuged for 10 min at 2,400 rpm. The cells were further cultured in the endothelial cell culture medium (EGM-2, Cambrex, Walkersville, Md., USA) supplemented with 10% fetal bovine serum, human EGF, human VEGF, human insulin-like growth factor-1, human FGF-$\beta$, heparin, ascorbic acid and hydrocortisone at a density of $1{\times}10^5$ cells/well in a 24-well plate. Low positivity of endothelial cell markers, such as CD31 and CD146, was observed during early passage of cells. Results: Increase of CD146 positivity was observed in passage 5 to 7 adipose tissue-derived cells. However, CD44, representative mesenchymal stem cell marker, was also strongly expressed. CD146 sorted adipose tissue-derived cells was cultured using immuno-magnetic beads. Magnetic labeling with 100 ${\mu}l$ microbeads per 108 cells was performed for 30 minutes at $4^{\circ}C$ a using CD146 direct cell isolation kit. Magnetic separation was carried out and a separator under a biological hood. Aliquous of CD146+ sorted cells were evaluated for purity by flow cytometry. Sorted cells were 96.04% positivity for CD146. And then tube formation was examined. These CD146 sorted adipose tissue-derived cells formed tube-like structures on Matrigel. Conclusion: These results suggest that adipose tissue-derived cells are endothelial cells. With the fabrication of the vascularized scaffold construct, novel approaches could be developed to enhance the engineered scaffold by the addition of adipose tissue-derived endothelial cells and periosteal-derived osteoblastic cells to promote bone growth.

• 대한방사선기술학회지:방사선기술과학
• /
• 제8권2호
• /
• pp.21-28
• /
• 1985

We serveyed the actual condition of business of the departments of radiology of 45 health conters (except 3) in the area of Seoul, Kyungki and Inchon from March, 1984 to November, 1984. The results are summarized as follows : 1. T.O. of the radiologic technologist is three persons in each health center of Seoul area, and one person in each one of Kyungki and Inchon area. P.O. is 2-5 persons in Seoul area, 1-2 persons in Kyungki or Inchon area. 2. The number of all the radiologic technologists employed now is 75 persons, and among all of them, when analized by position class 7th is 54.7%, class 8th 28.0%, class 9th is 13.3%, and class 6th is 2.7%, and by sex, female is 68.0%, male is 32.0%, by educational background, for the most part, junior college graduates come to 73.3%, by age group 60% of them is in their twenties, 16.0% is in their thirties and forties, 8.0% is in their fifties, and by career after certificate 60% have the career of 1-5 years, 13.3% have the one of 6-7 years or mor than 21 years, and 6.7% have the one of 11-15 years of 16-20 years. 3. All the diagnostic x-ray equipment being kept is 62, and among them flxing equipment is 71.0%, portable equipment is 29.0% and by rating of X-ray equipment, maximum tube current 100 mA is 46.8%, maximum KV 100KVP is 72.6%, the most part. 4. Photofluorographic camera and hood are equipped in every health center. While, as to the radiographic cassettes, $14{\times}14"$ cassetts are equipped in every health center, but cassettes of other sizes are in half of them. 5. Bucky's table is equipped in 11.9% health centers, the automatic processor is in 21.4%, the photofluorographic film changer is 9.5%, the grid is 73.8%, the protective apron is in 88.1%, and the protective glove is in 57.1% health centers. 6. The number of the people who got the x-ray examination for one year (by the year 1989) is the most, 1,000-6,000 in direct radiography of the chest, or 15,0001-45,000 in the health centers of Seoul area, 5,000-20,000 in Kyungki and Inchon area in photofluorography of the chest. Moreover, other radiographies are being taken extremely limitedly in all health centers. 7. In processing types of x-ray film, automatic processing is used in 9 health centers (21.4%), manual tank processing is in 30 (71.4%), and manual tray processing in 3 (7.2%). 8. As for collimation of x-ray exposure field, "continual using restricted by a subject size" has the most part, 78.6% "restricted using at every radiography" has 19%, and the case of "never considered" has 2.4% response. 9. As for the dosimeter used for radiation control, film badge (35.7%) and pocket dosimeter (26.2%) are used, and in 38.1% health centers the dosimeter is not equipped at all. Consideration of the previous radiation exposure is being done in only one health center. 10. Reading of radiographs is mainly depended on the radiologists electively (45.2%) or on the genral practitioners(45.2%).