• 대한기계학회논문집B
• /
• 제30권2호
• /
• pp.177-185
• /
• 2006

This study aims deriving analysis the flow characteristic of kitchen hood system with using 3-D numerical analysis method and improving the system to expel pollutes more efficiently. To understand the flow characteristics of four models, this study only focuses on velocity field, temperature field, and concentration field varying with followings whether separation plate is set or not and the shapes of separation plates. The quantity of air, speed of exhaust fan and temperature and concentration of heating source are concerned as constant values. The three models having different shapes have one exhaust port and the model which has the vent at the closest position to where pollutes are generated is discovered to be the most efficient model. Compare to the initial model (having no separation plate), it was $1.4-1.9\%$ more efficient at temperature distribution and $9.4-11.9\%$ more at $CO_2$ concentration distribution.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.291-294
• /
• 2006

Exhaust system of steam turbines consists of an annular diffuser and a collector and connects the last stage turbine and the condenser. The system is used to transfer the turbine leaving kinetic energy to potential energy while guiding the flow from turbine exit plane to the downstream condenser. In the steam turbine exhaust system, distorted pressure profile is arisen by the nonaxisymmetric collector structure at the diffuser outlet, and this distorted pressure is propagated to the last stage LP turbine exit plane through the diffuser, then the last stage LP turbine experiences asymmetric back pressure. It is known that the pressure recovery performance of diffuser is strongly influenced by diffuser inflow condition. In this study, the effect of exhaust system due to the changing of inlet flow condition is observed by using CFD, and the interaction of last stage LP turbine and exhaust system is investigated by using actuator disk model as modeling of turbine blade row of exhaust hood inlet.

• 한국소음진동공학회논문집
• /
• 제26권3호
• /
• pp.242-247
• /
• 2016

This work investigates the performances of active hood lift system(AHLS) activated by two different operating methods through the experimental test. In the AHLS, the deployment time of the system and decrement of pedestrian injury are the most important factors for the pedestrian safety during the pedestrian-vehicle impact. After introducing the working principle of AHLS using spring actuator and gunpowder actuator, the deployment time of AHLS and decrement of pedestrian injury are evaluated by the experimental test. It has been identified that the gunpowder actuator can provide a faster deploying time of AHLS.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.572-577
• /
• 2004

This paper presents numerical study on the performance improvement of the sirocco fan in a range hood. The performance of sirocco fan means a higher flowrate, a higher static pressure and a lower required motor power in a fixed geometry constraint. Various impeller geometric parameters, such as blade profile, blade diameter, blade thickness profile and blade exit angle, were investigated by numerically and the results were compared with each other to know the effects on the performance. In this approach, the volute geometry were fixed with the original shape. The numerical results show that the blade profile with airfoil shape and small exit blade thickness increases the performance. The blade exit angle shows optimum angle within a varied range. The efficiency of the optimized exit angle was about $10\%$ higher than the base blade exit angle and the static pressure was about $28\%$ higher at the flow coefficient 0.22.

• 한국전산유체공학회지
• /
• 제13권4호
• /
• pp.72-79
• /
• 2008

This study is to investigate the air flow around a sirocco fan which is used in a range hood. The main object of the study is to improve the flow rate of the fan by analysis of unsteady 3-dimensional incompressible flow. Overall analysis is carried out using CFD method. For this, we used a commercial code, SC/Tetra, and used a sliding mesh method to give the same condition as an actual state. First, verification of the CFD results is done by comparing the experimental data with the numerical data for the suction flow rate. It is confirmed that two results are well consistent. Then for the improvent of flow rate, the effect of shape factors such as diameter ratio of fan, geometry of case, cut-off aperture and guide angle of case exit on the suction flow rate was considered. Especially, for a new design of housing, the principle of Archimedes spiral was used. The overall analysis was applied to a new design of housing, and the result showed an increase of flow rate by 10.7%.

• 한국소음진동공학회논문집
• /
• 제26권3호
• /
• pp.265-269
• /
• 2016

In this research, the performances of active hood lift system(AHLS) are investigated according to the structural improvement through the experimental test. After introducing the working principle of the AHLS activated by a gunpowder actuator, the structural problems that cause the inefficiencies in the actuation are analyzed to reduce the deployment time of system. Sequentially, the improved structural model is proposed base on the analysis. The deployment time of AHLS are evaluated by the experimental test, and it has been identified that the improved model can provide a faster deploying time of AHLS.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집 특별세미나,특별/일반세션
• /
• pp.483-488
• /
• 2009

When a train enters into the tunnel with high speed, a compression wave generated inside the tunnel has been studied as a one-dimensional phenomenon. However, one-dimensional approach can't analyze 3-dimensional flow effect in the vicinity of the train body. In this research, so as to overcome this weak point, a prediction method of the wavefront of a compression wave using steady state solution has been used for the parametric study considering 3-dimensional effects of the interactions between trains and tunnels. The effective hood shapes were deduced in both cases of the train's entry into the tunnel on the single track and on a side of the double track. As a result, in case of the train's entry on a side of the double track, the increase of compression wave value propagated to the tunnel inside have appeared compared with the train's entry on the single track. Also, a horizontally convex elliptic hood shape is more effective at the train's entry on a side of the double track for the purpose of a decrease of wavefront gradient of a compression wave.

• 한국산학기술학회논문지
• /
• 제20권5호
• /
• pp.468-476
• /
• 2019

본 연구는 전술차량에 적용된 FRP 구조물의 품질문제 해소 및 예방을 위한 강도개선 방안에 대한 것이다. 소형전술차량은 후드조립체와 후방밴 조립체 등에 FRP 소재를 적용하여 전체적인 차량의 여유중량(공차중량)을 확보하였다. 그러나 FRP가 갖는 태생적인 한계로 인해 접합부 균열과 같은 초기 품질문제가 다수 발생되었다. 더구나, 후드조립체는 개발 시 고려한 조건과 다른 비정상적인 조건으로 운용됨을 확인하였다. 이러한 비정상적인 조건으로 장기간 장비 운용 시 해당 부품의 내구수명 저하가 우려되었다. 따라서, 본 연구에서는 이러한 FRP 구조물의 문제점에 대한 개선과 운용개념 변화에 따른 설계 안전율 추가 확보를 위한 굴곡강도 향상을 목표로 적층구조 최적화를 수행하였다. 그 결과, 접합부는 FRP 소재 적층수를 증가시킴으로써 후드조립체와 후방밴 조립체의 굴곡강도가 각각 8.1배, 1.5배 개선되었다. 또한, 후드조립체의 모재 부위는 FRP 적층구조 최적화를 통해 굴곡강도 1.4배 향상시켰으며, 그 결과 비정상 운용조건에 대한 내구수명 확보 및 한계하중 1.7배 개선효과를 확인하였다.

• 말소리와 음성과학
• /
• 제1권4호
• /
• pp.39-46
• /
• 2009

This study compares the perception of English high tense and lax vowels (/i, I, u, $\mho$/) by English speakers and Korean speakers of English. The four vowels were produced in /hVd/ context by a native speaker of English, and each word's vowel duration was manipulated to range from 170ms to 290ms in 30ms increments. Two English speakers and six Korean speakers of English were asked to listen to pairs of tense and lax vowel words with manipulated vowel durations and to identify the pair by choosing either heed-hid or hid-heed for front vowels and either who'd-hood or hood-who'd for back vowels. The results show that English speakers distinguished tense vowels from lax vowels with 100% accuracy regardless of the different durations, compared to 62% accuracy for Korean speakers of English. Most errors occurred for lengthened lax vowels and shortened tense vowels. The results of this study demonstrate that Korean speakers mainly rely on vowel duration as a cue to discriminate the tense and lax vowels. The theoretical and pedagogical implications of this finding are discussed.

• 한국환경보건학회지
• /
• 제31권5호
• /
• pp.372-378
• /
• 2005

To enhance educational effect for exhaust ventilation system, more instructive educational engineering such as experimental system should be needed. This study was performed to 1) manufacture the basic experimental system for local exhaust ventilation, 2) experiment with this system and 3) develop methodology of exhaust ventilation education. With this system, three pressures (static pressure(SP), velocity pressure(VP) and total pressure(TP)) were measured and illustrated and the graphic shapes agreed to theoretical ones relatively. Entry loss factor ($F_h$) of each hood was found to be different with hood shape, duct velocity and flow rate. This result implies that precise $F_h$ should be determined case by case and a industrial hygienist should not be dependent on the existing values. Pressure loss using velocity pressure method and characteristics of air movement near hoods using fume were grasped with this system. But larger system should be recommended to produce more precise experimental results.