• Journal of the Korean Wood Science and Technology
• /
• 제23권2호
• /
• pp.32-36
• /
• 1995

A study was conducted to evaluate the dynamic mechanical properties (modulus of elasticity, resonant frequency and interanal friction) of compression wood in Pinus densiflora. Vibration method was used for estimation of dynamic modulus of elasticity and the values were compared to those of static bending modulus of elasticity. The results obtained are as follows: 1. The dynamic modulus of elasticity of compression wood decreased, whereas that of normal wood increased, with increasing specific gravity. 2. The resonant frequency of compression wood decreased, whereas that of normal wood increased, with increasing specific gravity. 3. The internal friction of compression wood increased with increasing specific gravity. 4. The correlation coefficients between dynamic and static moduli of elasticity in compression and normal woods were high.

• 자원ㆍ환경경제연구
• /
• 제11권4호
• /
• pp.525-556
• /
• 2002

This paper investigates effect of gasoline price liberalization on price elasticity of gasoline demand. By using a model where a consumer optimizes her gasoline consumption and number of visits to gas station, we derive price elasticity of gasoline demand and its response to variation of size and frequency in price changes. It shows that price elasticity is decreased with increase in the size and frequency when the price rises. Since price liberalization increases the frequency but reduces the size, the effect of the liberalization on the price elasticity may not be determined. However, price liberalization can make the elasticity higher when the size reduction effect exceeds the frequency increase effect, which is consistent with empirical evidence provided by existing studies.

• 한국염색가공학회지
• /
• 제22권2호
• /
• pp.173-179
• /
• 2010

In this study, we determine the stretch and shrinkage properties of conjugated yarns. The shrinkage(%) and elasticity(%) were determined by applying twist conditions of 0, 350, 800, 1000, 1200, 1400, 1600, 2000 T/M (twisting per meter). It is found that the shrinkage(%) and elasticity(%) gradually decreased with increasing T/M. Especially the elasticity(%) dramatically decreased over 1400 T/M condition. In contrast, it is showed that the handle and drapery properties decreased below 1000 T/M, which indicates that the optimal T/M condition could be 1000~1400. The effect of shrinkage(%) and elasticity(%) with different steam setting temperatures (60, 70, 80 and $90^{\circ}C$) was also determined. The shrinkage(%) decreased with increasing setting temperature, while the elasticity not changed. In this context, the optimal steam setting temperature could be $80^{\circ}C$ because it is not easy to weave with the yarns which was set below $80^{\circ}C$. The elasticity(%) decreased with increasing the density of warp and weft. To produce soft handle, excellent drapery and good stretch fabrics, the warp density needs to be reached by 90% of the ideal warp density. In the case of NaOH treatments to the fabrics, the elasticity(%) increased with increasing weight reduction. Therefore, this study have demonstrated that the conjugated yarns with core yarn and the SDY CD(cation dyeable spindraw yarn) as an effect yarn would be appropriate to produce excellent mixture-yarn, which displays clean appearance, good handle and excellent elasticity, The optimized conditions are as follows; 1000~1200 twist per meter, $80^{\circ}C$ steam setting temperature, 90% of ideal warp density and relaxation condition treated with 5g/l NaOH concentration.

• Journal of the Korean Wood Science and Technology
• /
• 제41권5호
• /
• pp.466-473
• /
• 2013

Nondestructive evaluation (NDE) technique method using a resonance frequency mode was carried out for heat-treated wood under different conditions. The effect of heat treatment on the bending strength and NDE technique using the resonance frequency by impact hammer and force transducer mode for Korean paulownia, Pinus densiflora, Lidiodendron tulipifera and Betula costata were measured. The heat treatment temperature has been investigated at $175^{\circ}C$ and $200^{\circ}C$, respectively. There were a close relationship of dynamic modulus of elasticity and static bending modulus of elasticity to MOR. In all conditions, It was found that there were a high correlation at 1% level between dynamic modulus of elasticity and MOR, and static modulus of elasticity and MOR. However, the result indicated that correlation coefficient is higher in dynamic modulus of elasticity to MOR than that in static modulus of elasticity to MOR. Therefore, the dynamic modulus of elasticity using resonance frequency by impact hammer mode is more useful as a nondestructive evaluation method for predicting the MOR of heat-treated wood under different temperature and species conditions.

• Journal of Acupuncture Research
• /
• 제28권5호
• /
• pp.111-119
• /
• 2011

Objective : Facial embedding therapy is a korean medical treatment technique for face lifting. The authors aimed to evaluate the effects of embedding therapy on facial skin elasticity and moisture content. This paper was written to provide objective datas about Facial embedding therapy. Results : Mean elasticity of both $ST_3$ increased after facial embedding therapy. skin elasticity of both $ST_3$ showed significant improvement. Mean moisture content of both $ST_3$ increased after facial embedding therapy. skin moisture content of both $ST_3$ showed significant improvement. Conclusion : Mean elasticity and moisture content of both $ST_3$ increased after facial embedding therapy. Facial embedding therapy may be an effictive treatment for improving elasticity and moisture content of skin in clinic.

• 한국습지학회지
• /
• 제22권3호
• /
• pp.178-186
• /
• 2020

본 연구에서는 낙동강 주요 지류의 기온과 수온 자료를 이용하여 탄성도를 산정하고 수온의 민감도 분석을 수행하였다. 탄성도에 대한 신뢰구간 추정과 가설검증이 가능한 비모수 기반의 탄성도 해석기법을 개발하여 기존 중간값을 이용하는 기법과 비교하고 적용성을 검토하였다. 계절적으로 겨울의 탄성도가 낮고 여름과 가을의 탄성도가 높은 것으로 분석되어 기온의 변동에 따른 수온 및 수질의 변동이 클 것으로 분석되었다. 공간적으로 하수처리장 방류수, 중소 축사의 가축폐수, 소규모 공장의 오·폐수 등 인위적인 요인의 영향을 받는 금호강 지역의 탄성도가 낮은 경향을 나타내고 있다. 낙동강 주요 지류의 탄성도는 약 이상이고 유의수준 5%에서 타당하므로 기후변화에 따른 기온-수온 변동이 큰 것으로 분석되었다.

• 한국잠사곤충학회지
• /
• 제15권1호
• /
• pp.31-35
• /
• 1973

생사의 항장성에 관여하는 기본적인 성질은 강력 신도 및 탄성이다. 그리고 이들 3자간의 적당한 조화가 생사의 특성을 발현한다. 또 생사의 이러한 역학적 거동은 이를 구성하고 있는 견사가 지배하는 것이다. 이러한 견지에서 저자는 견사의 신장변형과정에서의 항장성에 관하여 연구하고 다음과 같은 결과를 얻었다. 1. 견층별견사의 인장강력은 내층견사가 외층 및 중층견사보다 높았다. 2. 견건조과정에 있어서 견층 sericin의 습열변성은 견사의 인장강력을 변화시킨다. 3. 신장과정에 있어서 견사의 변형량이 증가하면 elasticity index가 감소한다. 4. 다습열에 의한 견층 sericin의 변성은 견사의 elasticity 를 감소시킨다.

• Environmental Engineering Research
• /
• 제18권1호
• /
• pp.9-20
• /
• 2013

In this paper, the rainfall elasticity of streamflow was estimated to quantify the effects of climate change on 5 river basins. Rainfall elasticity denotes the sensitivity of annual streamflow for the variations of potential annual rainfall. This is a simple, useful method that evaluates how the balance of a water cycle on river basins changes due to long-term climate change and offers information to manage water resources and environment systems. The elasticity method was first used by Schaake in 1990 and is commonly used in the United States and Australia. A semi-distributed hydrological model (SLURP, semi-distributed land use-based runoff processes) was used to simulate the variations of area streamflow, and potential evapotranspiration. A nonparametric method was then used to estimate the rainfall elasticity on five river basins of Korea. In addition, the A2 (SRES IPCC AR4, Special Report on Emission Scenarios IPCC Fourth Assessment Report) climate change scenario and stochastic downscaling technique were used to create a high-resolution weather change scenario in river basins, and the effects of climate change on the rainfall elasticity of each basin were then analyzed.

• 자원ㆍ환경경제연구
• /
• 제9권2호
• /
• pp.333-347
• /
• 2000

We employed various econometic methods to estimate the production index elasticity and the price elasticity of elecricity demand in Korea and compared the forecasting power of those methods. Cointegration models (ADL model, Engle-Granger model, Full Informtion Maximum Likelihood method by Johansen and Juselius) and Dynamic OLS by Stock and Watson were considered. The forecasting power test shows that Dynamic OLS has the best forecasting power. According to Dynamic OLS, the production index elasticity and the price elasticity of electricity demand in Korea are 0.13 and -0.40, respectively.

• Journal of the Korean Wood Science and Technology
• /
• 제25권1호
• /
• pp.8-14
• /
• 1997

Stress wave velocity, wave impedance, and stress wave elasticity of small, clear bending specimens of five domestic softwoods (Pinus densiflora, Pinus koraiensis, Chamaecyparis obtusa, Cryptomeria japonica, and Larix leptolepis) and four tropical hardwoods(Kempas, Malas, Taun, and Terminalia) were correlated with static bending modulus of elasticity(MOE) and modulus of rupture(MOR). The degree of correlation between stress wave parameters and static bending properties was dependent on wood species tested. Stress wave elasticity and wave impedance were better predictors for static bending properties than stress wave velocity for each species individually and for softwood or hardwood species taken as a group, even though elasticity and impedance were nearly equally correlated with static bending properties apparently. Based upon the correlation coefficient between stress wave parameters and static properties, stress wave elasticity and wave impedance were found as stress wave parameters which can be used for the purpose of the reliable and successful prediction of bending properties. The degree of correlation between static MOE and MOR was also different according to wood species tested. Static MOE was nearly as well correlated with MOR as was stress wave elasticity. The results of this research are encouraging and can be considered as a basis for further work using full-size lumber. From the results of this study, it was concluded that stress wave measurements could provide useful predictions of static bending properties and was a feasible method for machine stress grading of domestic softwoods and tropical hardwoods tested in this study.