• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권4호
• /
• pp.477-482
• /
• 2012

This paper describes a new rotor position sensorless control method for SRM drives based on an improved simplified flux linkage method. In the traditional simplified flux linkage method, every phases take turns conduction and current chopping control method is used. Every phases take turns conduction means turning on the incoming working phase while turning off the working phase. This conduction mode causes coupling between turn-on and turn-off angles, which goes against optimal efficiency or torque ripple minimization with sensorless speed control. In the improved simplified flux linkage method, turn-off angle is calculated by flux loop, the turn-on angle can be given arbitrarily and has no relations with the turn-off angle, and the current chopping control method is used. The speed and rotor position can be estimated then. Finally, a sensorless SRM speed control system and an experiment platform with DSP are built and validity of this method is confirmed.

• 전기학회논문지
• /
• 제57권8호
• /
• pp.1356-1361
• /
• 2008

A switched reluctance generator(SRG) has simple magnetic structure, and needs simple power electronic driving circuit. But, a SRG are no windings or permanent magnets on the rotor, and there are concentrated windings placed around each salient pole on the stator. Because of the characteristics of time-sharing excitation, the control of SRG is very flexible. And there are several parameters for controlling SRG, such as switch turn-on angle, switch turn-off angle, and exciting voltage and controlling mode, all these will affect the generation greatly. A SRG has positive torque at increasing inductance region and negative torque at decreasing inductance region. In this paper, we studied characteristics about the switch turn-on and off angles according to switch method for constant output voltage of the fixed speed SRG. It is the acoustic noise and torque ripple characteristics. Characteristics for a switch angle and method are presented by experiment using a 50W SRG with 12/8 poles.

• 전력전자학회논문지
• /
• 제12권1호
• /
• pp.98-106
• /
• 2007

본 논문에서는 개선된 온라인 턴 오프각 제어방식을 이용하여 스위치드 릴럭턴스 전동기의 성능최적화를 위한 온라인 전류제어방식을 제안한다. 성능최적화를 위한 제어방식은 에너지효율의 최대화와 토크리플 저감이라는 두가지 측면에서 접근하며, 두 가지 조건을 모두 만족할 수 있는 최적의 턴 오프 위치각은 제안된 알고리즘의 연산방식을 통해 획득된 턴 오프각 제어기를 통해 구현됨으로서 SRM의 성능최적화를 이룬다. 제안된 제어기는 토크와 전류 특성, 자속변동의 정보와 같은 복잡한 데이터베이스나 SRM이 가지는 고유의 자화곡선을 요구하지 않는다는 장점을 가지며 제안된 연산 제어기를 시뮬레이션과 실험을 통해 실제 적용가능성과 그 타당성을 입증한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.243-246
• /
• 2001

The control of the SRM(Switched Reluctance Motor) is usually based on the non-linear inductance profiles with positions. So determination of optimal switching angle is very different. This paper proposed that the determination method of turn-on/off angle in the SRM drives is to maintain the high torque, which is realized by using self-tuning control method. During the sampling time, a number of pulses from the encoder are checked by using micro-controller. And compared with pre-checked a number of pulses. After calculating difference between two data, turn-on/off angle moves forward or backward direction by using self-tuning method. The optimal turn-on/off angle is determined by iterating such a process and the maximum torque is maintained. Experimental results are provided to demonstrate the validity of the self-tuning controller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.989-991
• /
• 2004

There are many elements that affect the average torque of the single phase SRM. It is related with the stator and rotor pole arcs, the dwell angle of the exciting current, the turn on/off angle, etc., Most of all, the turn on/off angle is affect the design procedure of the driving and control circuit. So, in this study, it is intend to analyze the effect that the variations of the turn on/off angle affects the average torque. and then this analyses will be used to design the control driver of the single phase SRM.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.555-557
• /
• 2006

This paper represent improved On-line Turn off Angle control schemes for switched reluctance motors based on current control. For the purpose of the finding optimal commutation switching angle point, it is utilized him on and turn off position calculation with inductance vs. current vs. flux linkage analysis method. The goal of proposed paper is the maximization of the energy conversion per stroke and maximizing efficiency and obtaining approximately flat-topped current waveform. The proposed control scheme is demonstrated on a prototype experimental system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.232-234
• /
• 2005

In this paper, A fuzzy logic based turn-off angle compensator for torque ripple reduction in a linear switched reluctance motor is proposed. The turn-off angle, as a complex function of motor speed and current, is automatically changed for a wide speed range to reduce torque ripple. Simulation results are presented that show ripple reduction when the turn-off angle compensator is used.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.701-704
• /
• 2000

A SRG(Switched Reluctance Generator) has many advantages such as efficiency simple controllability low cost and robustness compared with outer machines. But the theories that have been adopted as SRG control methods up to the present are complicated. This paper proposes a simple control methods using PID which controls only a turn-off angle while making turn-on angle signals of SRG constant. controlling the voltage differences between the reference and the real value and calculating the proper turn-off angle of the load variations can implement to keep the output voltage constant. the control method suggested in this paper enhances the efficiency of this system and simplifies the hardware and software by using only the voltage and speed sensors. The proposed method is verified by experiment

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1061-1062
• /
• 2006

This paper represent improved On-line Turn off, commutation Angle control schemes for switched reluctance motors based on current control. For the purpose of the finding optimal commutation switching angle point, it is utilized turn on and turn off position calculation with inductance vs. current vs. flux linkage analysis method. The goal of proposed paper is the maximization of the energy conversion per stroke and maximizing efficiency and obtaining approximately flat-topped current waveform. The proposed control scheme is demonstrated on a simulation experimental result.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1527-1536
• /
• 2014

This paper investigates the optimal values of turn-on and turn-off angles, and ratio of flux linkage at turn-off angle and peak phase current positions of optimal control for accomplishing maximum output power in an 8/6 Switched Reluctance Generator (8/6 SRG). Phase current waveform is analyzed to determine optimal excitation angles (optimal turn-on and turn-off angles) of the SRG for maximum output power which is applied from a nonlinear magnetization curve in terms of control variables (dc bus voltage, shaft speed, and excitation angles). The optimal excitation angles in single pulse mode of operation are proposed via the analytical model. Simulated and experimental results have verified the accuracy of the analytical model.