• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.1
• /
• pp.9-15
• /
• 2016

Source localization has developed in various fields of signal processing including radar, sonar, and wireless communication, etc. Source localization can be found by estimating the time difference of arrival between the each of sensors. Several methods like the NLS(Nonlinear Least Square) cost function have been proposed in order to improve the performance of time delay estimation. In this paper, we propose a clustering method using the four sensors with the same aperture as previous methods of using the three sensors. Clustering method can be improved the source localization performance by grouping similar estimated values. The performance of source localization using clustering method is evaluated by Monte Carlo simulation.

• Journal of Information Technology Applications and Management
• /
• v.23 no.3
• /
• pp.87-97
• /
• 2016

This paper proposes a fast sound source localization method using a TDOA sign-based algorithm. We present an L-shaped microphone set-up which creates four major regions in the range of $0^{\circ}{\sim}360^{\circ}$ by the intersection of the positive and negative regions of the individual microphone pairs. Then, we make an initial source region prediction based on the signs of two TDOA estimates before computing the azimuth value. Also, we apply a threshold and angle comparison to tackle the existing front-back confusion problem. Our experimental results show that the proposed method is comparable in accuracy to previous three microphone array methods; however, it takes a shorter computation time because we compute only two TDOA values.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.10
• /
• pp.947-954
• /
• 2012

Sand scorpions are nocturnal animals to mostly use tactile senses to detect their prey. It has been reported that sand scorpions have high vibration sensitivity for their prey-localizing behavior. We tested vibration experiments in the sand with microphone sensors to model the sand scorpion's behavior and a time-difference model was applied to find the direction of a vibration source. Using the information of the arrival time of the vibration signal to reach each leg position, we can find the location of the vibration source.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.1080-1084
• /
• 2007

Many different methods for sound source localization have been developed. Most of them mainly depend on time delay of arrival (TDOA) or on empirical or analytic head related transfer functions (HRTFs). In real implementation, since the direct path between a source and a sensor is interrupted by obstacles as like a head or body of robot, it has to be considered the number of sensors as well as their positions. Therefore, in this paper, we present the methods, which are included sensor position problem, to localize the sound source with 4 microphones to cover the 3D space. Those are modified two-step TDOA methods. Our conclusion is that the different method has to be applied in case to be different microphone position on real robot platform.

• Journal of Korean Clinical Nursing Research
• /
• v.18 no.2
• /
• pp.275-283
• /
• 2012

Purpose: This study was conducted to compare pain, sense, bleeding, and hematoma that patients feel depending on the process of eliminating air of pressure band that was applied to patients after percutaneous coronary intervention (PCI) through radial artery. Methods: It was a nonequivalent control group pretestposttest design to compare pain, sense, bleeding, and hematoma by amount and time of eliminating air of pressure band after PCI through radial artery. Results: On arrival at Coronary Care Unit, meaningful difference didn't exist between pain and sense, however, after two hours of starting eliminating air, the points of pain and sense were meaningfully low (p<.001). Also, there was meaningful difference in reciprocal action between group and time (p<.001). Conclusion: After PCI, the conclusion showed there is positive effect in decreasing wrist pain and sense without any influence of bleeding by eliminating air from patients' pressure bands.

• Journal of the Institute of Convergence Signal Processing
• /
• v.16 no.2
• /
• pp.40-43
• /
• 2015

In this paper, the effects of the leading and the following sounds with single frequency on sound localization are investigated. The sounds with different levels and ISIs(Inter Stimuli Intervals) were used. The width of test sound is 2ms, and those of the leading and the following sounds are 10ms. 1 kHz of the test sound is utilized. The arrival time difference in the subject's ears is set to be 0.5ms. The four kinds of level differences used for one ISI are 0, -10, -15, and -20dB interval. The leading sound is found to have more effect on sound localization than the following sound is. The effect of the leading sound is also found to be dependent on the value of ISI. When the value of the ISI is small, different effects affecting the sound localization are observed.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.4
• /
• pp.37-45
• /
• 2015

In modern electronic warfare systems, a demand on the more accurate estimation method based on TDOA and FDOA has been increased. TDOA/FDOA localization consists of two-stage procedures: the extraction of information from signals and the estimation of emitter location. Various algorithms based on CAF(complex ambiguity function), which is known as a basic method, has been presented in the area of extractions. When we extract TDOA and FDOA information using a conventional method based on the CAF algorithm from communication signals, considerably long integration time is required for the accurate position estimation of an unknown emitter far from sensors more than 300 km. Such long integration time yields huge amount of transmission data from sensors to a central processing unit, resulting in heavy computiational complexity. Therefore, we theoretically analyze the integration time for TDOA/FDOA information using CRLB and propose a two-stage global optimization algorithm which can minimize the transmission time and a computational complexity. The proposed method is compared with the conventional CAF-based algorithms in terms of a computational complexity and the CRLB to verify the estimation performance.

• Steel and Composite Structures
• /
• v.17 no.6
• /
• pp.891-906
• /
• 2014

This study aims to present a three dimensional finite element model to investigate the wave propagation in a concrete filled steel tubular column (CFSC) due to transient impact load. Both the concrete and steel are regarded as linear elastic material. The impact load is simulated by a semi sinusoidal impulse. Besides the CFSC models, a concrete column (CC) model is established for comparing under the same loading condition. The propagation characteristics of the transient waves in CFSC are analyzed in detail. The results show that at the intial stage of the wave propagation, the velocity waves in CFSC are almost the same as those in CC before they arrive at the steel tube. When the waves reach the column side, the velocity responses of CFSC are different from those of CC and the difference is more and more obvious as the waves travel down along the column shaft. The travel distance of the wave front in CFSC is farther than that in CC at the same time. For different wave speeds in steel and concrete material, the wave front in CFSC presents an arch shape, the apex of which locates at the center of the column. Differently, the wave front in CC presents a plane surface. Three dimensional effects on top of CFSC are obvious, therefore, the peak value and arrival time of incident wave crests have great difference at different locations in the radial direction. High-frequency waves on the waveforms are observed. The time difference between incident and reflected wave peaks decreases significantly with r/R when r/R < 0.6, however, it almost keeps constant when $r/R{\geq}0.6$. The time duration between incident and reflected waves calculated by 3D FEM is approximately equal to that calculated by 1D wave theory when r/R is about 2/3.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2C
• /
• pp.255-261
• /
• 2004

The problem of geolocation using multiple satellites is to determine the position of a transmitter located on the Earth by processing received signals. The specific problem addressed in this paper is that of estimating the position of a stationary transmitter located on or above the Earth's surface from measured time difference of arrivals (TDOA) by a geostationary orbiting (GSO) satellite and a low earth orbiting (LEO) satellite. The proposed geolocation method is based on the total least squares (TLS) algorithm. Under erroneous positions of the satellites together with noisy TDOA measurements, the TLS algorithm provides a better solution. By running Monte-Carlo simulations, the proposed method is compared with the ordinary least squares (LS) approach.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.1
• /
• pp.47-56
• /
• 2020

The sound source localization technique has various application fields in the era of internet-of-things, for which the probe size becomes critical. The localization methods using the acoustic intensity vector has an advantage of downsizing the layout of the array owing to a small finite-difference error for the short distance between adjacent microphones. In this paper, the acoustic intensity vector and the Time Difference of Arrival (TDoA) method are compared in the viewpoint of the localization error in the far-field. The comparison is made according to the change of spacing between adjacent microphones of the three-dimensional microphone array arranged in a tetrahedral shape. An additional test is conducted in the reverberant field by varying the reverberation time to verify the effectiveness of the methods applied to the actual environments. For estimating the TDoA, the Generalized Cross Correlation-Phase transform (GCC-PHAT) algorithm is adopted in the computation. It is found that the mean localization error of the acoustic intensimetry is 2.9° and that of the GCC-PHAT is 7.3° for T₆₀ = 0.4 s, while the error increases as 9.9°, 13.0° for T₆₀ = 1.0 s, respectively. The data supports that a compact array employing the acoustic intensimetry can localize of the sound source in the actual environment with the moderate reflection conditions.