• Medical Lasers
• /
• v.10 no.4
• /
• pp.214-219
• /
• 2021

Background and Objectives To evaluate the difference in near-infrared (810 nm) laser energy transmission through teeth with and without cracks. Materials and Methods Extracted teeth were sectioned and examined visually for the presence of cracks with the aid of photographs and a trans-illuminator. Fourteen sections, each with cracks (Group A) and no cracks (Group B) were identified and placed 15 mm from the tip of a 300 micron fiber, prior to activation with an 810 nm diode laser (0.1W, 50 ms interval,100 ms duration). A power meter positioned behind the tooth recorded the average energy that was transmitted through the samples. Unpaired t-test analysis was used to determine if the tooth sections with cracks allowed higher power passage compared to sound teeth. Results The mean power recording for the cracked teeth (Group A) was significantly greater (p = 0.0005) than that for the non-cracked teeth (Group B). Conclusion Within the limitations of this study, it is evident that significantly higher laser energy passes through teeth with cracks in comparison to teeth without cracks. A recent clinical study has also shown that lasers could be used to assess symptomatic cracked teeth. Hence, further research is required to determine the relative increase in energy required to identify symptomatic cracked teeth.

• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.3
• /
• pp.464-474
• /
• 1996

A principal advantage of a plastic tooth over a porcelain tooth should be its ability to bond to the denture base material. But plastic teeth could craze and wear easily, so more abrasion resistant plastic denture teeth have been developed. To resist abrasion, the degree of cross-linking was increased, but bonding to denture base meterial became more difficult. The purpose of this study was to evaluate the bond strength of plastic teeth and abrasion resistant teeth bonded to heat-curing, self-curing and light-curing denture base material. Denture tooth molds were chosen that had a>8mm diameter. The denture teeth was bonded to three denture base materials and then machined to the same dimensions. Three denture base materials were used as control groups. Prior to tensile testing, the specimens were thermocycled between $5^{\circ}C\;and\;55^{\circ}C$ for 1000cycles. Tensile testing was performed on an Instron Universal testing mechine. Experimental group ; plastic teeth(Justi Imperial)+heat-curing resin(Lucitone 199) plastic teeth(Justi Imperial)+light-curing resin(Triad) plastic teeth(Justi Imperial)+self-curing resin(Vertex SC) abrasion resistant teeth(IPN)+heat-curing resin(Lucitone 199) abrasion resistant teeth(IPN)+light-curing resin(Triad) abrasion resistant teeth(IPN)+self-curing resin(Vertex SC) Control group ; heat-curing resin(Lucitone 199) light-curing resin (Triad) self-curing resin(Vertex SC). The results were as follows : 1. The denture teeth bonded to heat-curing resin showed the cohesive failure and those bonded to the other resins showed adhesive failure. 2. Tensile bond strength of the plastic teeth bonded to self-curing resin was not significantly greater than bonded to light-curing resin(p>0.05). 3. Tensile bond strength of the abrasion resistant teeth bonded to self-curing resin was not significantly greater than bonded to light-curing resin(p>0.05). 4. Tensile bond strength of the plastic teeth to self-curing resin was not significantly different from that of the abrasion-resistant teeth(p>0.05). 5. Tensile bond strength of the plastic teeth to light-curing resin was significantly greater than that of the abrasion resistant teeth(p<0.01).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.10 no.1
• /
• pp.77-83
• /
• 1983

The purpose of this study was to observe the microleakage of a pit and fissure sealant at the tooth-restoration interface. One hundred and sixty-seven extracted permanent and deciduous teeth were used and some simple mechanical pretreatment were done before etching. The degree of microleakage was assessed by $Ca^{45}$ after 24 hours, and 2 months. The results were as follows: 1. Among total 167 teeth, 53 teeth (32%) were demonstrated the microleakage. 2. After 2 months the leakage was increased from 22 percent to 35 percent in permanent teeth, and from 32 percent to 43 percent in primary teeth. 3. The group treated by fluoride paste was demonstrated the largest leakage, 50 percent in primary teeth and 33 percent in permanent teeth. There are more leakage in primary teeth (38%) than permanent teeth (28%).

• Journal of Biosystems Engineering
• /
• v.13 no.4
• /
• pp.9-19
• /
• 1988

The threshing of head-feed combine may be accomplished mainly by the action of impact between threshing teeth and rice. In this study, it was attempted to assess threshing performance characteristics of head-feed threshing teeth. And the characteristics of threshing teeth will be applied to the method which could analyze the time and order of impact between teeth and the rice, which was used as a basis for predicting the threshing performance and determining the optimum design parameters. The results of the study are summarized as follows: 1. About 50% of threshed material were threshed by the beginning 7 impacts on the rice bundle. Threshing torque decreased until 25 impacts and did not change thereafter. 2. There was significant difference in the threshability according to the shape of threshing teeth. The triangular-shaped tooth was the most efficient in threshability ratio and the semicircle-shaped tooth was the lowest. There was no significant difference in specific energy requirement for the varied teeth design. Torn-head ratio being generated by the semicircle-shaped and the triangular-shaped teeth in series was less than that by a single tooth with the triangular-shaped and the double setting of the triangular-shaped. Chaff generation ratio by the triangular-shaped and the semicircle-shaped teeth was less than the others tried. 3. The triangular-shaped teeth in series, which was newly designed for this study, showed an intermediate characteristics between the double setting of the triangular-shaped and the semicircle- shaped teeth. Threshability ratio of the triangular-shaped teeth in series was higher than that of the semicircle and lower than the double setting of the triangular-shaped tooth. Torn-head generation ratio for it was about same as that of the semicircle. Chaff being generated by the triangular-shaped teeth in series was about same as the double setting of the triangular-shaped teeth. 4. About 40% of threshed grains which passed through concave were concentrated under the threshing tooth and the rest of grains displayed a skew distribution toward the inlet of threshing chamber.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.2
• /
• pp.201-212
• /
• 2002

This study investigated the shear bond strengths between abrasion-resistant denture teeth and composite resins according to surface treatments. Denture teeth for this study were Trubyte IPN teeth(Dentsply Inc., USA) with interpenetrating polymer network and Endura Posterio (Shofu Inc. Japan) of composite resin teeth, and restorative composite resins were Clearfil FII (Kuraray, Japan) of the self-cured composite resin and Z100(3M Dental Product, USA) of the light-cured composite resin. Five different surface treatments were evaluated: (1) $50{\mu}m\;A1_2O_3$ sandblasting: (2) #100 carbide paper; (3) chloroform; (4) retentive holes; and (5) no treatment. After surface treatments, denture teeth were examined by scanning electron microscopy(SEM), and the maximum shear bond strengths between abrasion-resistant denture teeth and composite resins were measured using Instron. The results were as follows; 1. IPN teeth treated with sandblasting had the highest shear bond strength, and Endura treated with sandblasting and carbide paper had significantly greater shear bond strength than with any other surface treatment. 2. Regardless or composite resins, the shear bond strength on Endura was greater than on IPN teeth. 3. Regardless of denture teeth, the shear bond strength of Clearfil FII was greater han of Z100. 4. In appearance of SEM, IPN teeth treated with sandblasting showed generalized roughness on the all of surface, however, carbide paper treatment resulted in partly rough. Endura treated with sandblasting and carbide paper showed similar surface characteristics. Wetting denture teeth surface with chloroform removed the debris and created a particle-free and smooth surface.

• Restorative Dentistry and Endodontics
• /
• v.49 no.3
• /
• pp.31.1-31.11
• /
• 2024

Objectives: The present study investigated the prevalence of mechanical allodynia (MA) in healthy teeth adjacent and contralateral to endodontically diseased teeth. Materials and Methods: This cross-sectional study included 114 patients with symptomatic irreversible pulpitis and apical periodontitis in permanent mandibular first molars who possessed healthy teeth adjacent and contralateral to the endodontically diseased tooth. The mechanical sensitivity of the teeth was determined by percussion testing. The presence or absence of pain on percussion in the teeth adjacent and contralateral to the endodontically diseased tooth and the tooth distal to the contralateral symmetrical tooth was recorded according to coding criteria. The prevalence of MA was computed as a percentage, and binary logistic regression analysis was done. The Fisher exact test and Mann-Whitney U test were used for binary and ordinal data. Results: Age and sex did not influence the prevalence of MA. An increased prevalence of MA was found in patients with higher levels of spontaneous pain (p < 0.001). The prevalence of allodynia was 57% in teeth adjacent to endodontically diseased teeth and 10.5% in teeth contralateral to endodontically diseased teeth. In addition, on the ipsilateral side, there were more painful sensations distal to the diseased tooth than mesially. Conclusions: Despite being disease-free, teeth adjacent and contralateral to endodontically diseased teeth exhibited pain on percussion. There was a direct association between the severity of the patient's pain and the presence of MA.

• Journal of Korean society of Dental Hygiene
• /
• v.11 no.1
• /
• pp.127-136
• /
• 2011

Objectives : The writer aimed to examine the dynamic aspect on damage and to be conducive to the swift cure according to right treatment to educate prevention of injury through surveying on the number of the damaged teeth given injury, tooth kind, type in damage, place and cause for being damaged, frequency by month and by time level, and location of the damaged tooth. Methods : Targeting 343 teeth of receiving injury in 201 patients who visited the department of pediatric dentistry, the department of preservation, and the oral and maxillofacial surgery in a dental hospital in Cheonan city from April 2007 to April 2009, by having the dental injury as the main reason, the following conclusions were obtained. Results : 1. Deciduous teeth were indicated to be the highest in imperfect luxation with 60.7%, and were indicated to be in order of crown fracture with 25.5%, root fracture with 12.4%, and perfect luxation with 1.4%. The permanent teeth were indicated to be the highest in crown with 58.1%, and were indicated to be in order of imperfect luxation with 27.3%, root fracture with 13.1%, and perfect luxation with 1.5%(p<0.001). 2. In case of deciduous teeth for a place with damage, the home was indicated to be the highest with 31.7%. The permanent teeth were indicated to be the highest(p<0.001) in the road and stairs with 40.4%. As to a cause for damage, both deciduous and permanent teeth were indicated to be the highest(p<0.001) in a cause for falling with 53.1% and 30.8%, respectively. 3. As for a treatment method, in case of deciduous teeth, the close observation was indicated to be the highest with 46.9%. In permanent teeth, the resin restoration was indicated to be the highest(p<0.001) with 22.2%. Dental injuries in deciduous teeth and permanent teeth are showing diverse aspects. Conclusions : It is important to arrange guidelines on cure of the damaged teeth by injury through continuing a dynamic research on these aspects. Also, the damage in deciduous teeth may have direct and indirect influence upon growth in successional permanent teeth. Thus, through careful treatment, the injury needs to be minimized. It is considered to be likely necessary for a right coping method when injury occurs, and above all, for enough prior education so that injury cannot occur.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.15 no.1
• /
• pp.41-49
• /
• 1985

The purpose of this study was to evaluate the initial and postoperative radiographic features of the endodontic treated teeth. The author examined the radiographs which comprise 114 teeth with 155 canals of 64 persons. The following factors were considered; Age, sex, tooth location, number of root canals, postoperative periods, initial diagnosis, and radiographic findings, postoperative radiographic findings. The apical levels of the root fillings were 76.8% to apex, 19.0% underfilling, 3.9% overfilling. The following results were obtained. 1. Of the 93 teeth which revealed initial periapical rarefaction, 66 teeth (71.0%) had showed complete bone healing, 19 teeth (20.4%) decreased rarefaction, 6 teeth (6.5%) no change, 2 teeth (2.2%) increased rarefaction after 20.0 months mean healing time. 2. 21 teeth which had no initial periapical rarefaction showed no occurrence of new periapical rarefaction. 3. Of the 66 teeth completely healed, 53 teeth (80.3%) had showed reappearance of lamina dura, 64 teeth (97.0%) reappearance of periodontal ligament space after 23.4 months mean healing time.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.5
• /
• pp.507-513
• /
• 2000

Objective : The purpose of this study is to evaluate the vitality of the teeth in and adjacent to the mandibular fracture line according to variable conditions of fracture and to establish the protocol of treatment of fracture line teeth. Materials and Methods : The vitality of 97 teeth in fracture line and 104 teeth adjacent to fracture line of 52 patients were invested preoperatively. Of these, 66 teeth in fracture line and 72 teeth adjacent to fracture line were monitored at least 6 months after operation. An electric pulp tester was used to measure pulpal response. The relationships between the vitality of teeth in variable time(preoperation, immediate post-operation; within 1 week after operation, and 6 months after operation) and variable conditions of fracture(horizontal, vertical gap of fracture line, the number of fracture line)were evaluated statistically. Result : The vitality of fracture line teeth in the 6 months after operation statistically differed by the vertical gap of fracture line and the number of fracture line. The vitality of fracture line adjacent teeth in the immediate post-operation only statistically differed by the vertical gap of fracture line. There were statistically differences between preoperative EPT value and vitality of fracture line teeth on 6 months after operation. There were 5 cases of complications including periapical and periodontal abscess. Of these, only one tooth was extracted and the others were well treated with endodontic treatment and subgingival curettage. Conclusion : It is recommended to retain teeth and to monitor the vitality of teeth in and adjacent to fracture line, unless there is an absolute indication for extraction.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.6
• /
• pp.376-382
• /
• 2020

PURPOSE. To determine the shear bond strengths of different denture base resins to different types of prefabricated teeth (acrylic, nanohybrid composite, and cross-linked) and denture teeth produced by computer-aided design/computer-aided manufacturing (CAD/CAM) technology. MATERIALS AND METHODS. Prefabricated teeth and CAD/CAM (milled) denture teeth were divided into 10 groups and bonded to different denture base materials. Groups 1-3 comprised of different types of prefabricated teeth and cold-polymerized denture base resin; groups 4-6 comprised of different types of prefabricated teeth and heat-polymerized denture base resin; groups 7-9 comprised of different types of prefabricated teeth and CAD/CAM (milled) denture base resin; and group 10 comprised of milled denture teeth produced by CAD/CAM technology and CAD/CAM (milled) denture base resin. A universal testing machine was used to evaluate the shear bond strength for all specimens. One-way ANOVA and Tukey post-hoc test were used for analyzing the data (α=.05). RESULTS. The shear bond strengths of different groups ranged from 3.37 ± 2.14 MPa to 18.10 ± 2.68 MPa. Statistical analysis showed significant differences among the tested groups (P<.0001). Among different polymerization methods, the lowest values were determined in cold-polymerized resin.There was no significant difference between the shear bond strength values of heat-polymerized and CAD/CAM (milled) denture base resins. CONCLUSION. Different combinations of materials for removable denture base and denture teeth can affect their bond strength. Cold-polymerized resin should be avoided for attaching prefabricated teeth to a denture base. CAD/CAM (milled) and heat-polymerized denture base resins bonded to different types of prefabricated teeth show similar shear bond strength values.