• 소성∙가공
• /
• 제19권1호
• /
• pp.11-16
• /
• 2010

The influence of pre-strain on low cycle fatigue behavior of Fe-18Mn-0.05Al-0.6C TWIP steel was studied by conducting axial strain-controlled tests. As-received plates were deformed by rolling with reduction ratios of 10 and 30%, respectively. A triangular waveform with a constant frequency of 1 Hz was employed for low cycle fatigue test at the total strain amplitudes in the range of ${\pm}0.4\;{\sim}\;{\pm}0.6$ pct. The results showed that low-cycle fatigue life was strongly dependent on the amount of pre-strain as well as the strain amplitude. Increasing the amount of prestrain, the number of reversals to failure was significantly decreased at high strain amplitudes, but the effect was negligible at low strain amplitudes. A new model for predicting fatigue life of pre-strained body has been suggested by adding ${\Delta}E_{pre-strain}$ to the energy-based fatigue damage parameter. Also, high-cycle fatigue lives predicted using the low-cycle fatigue data well agreed with the experimental ones.

• 산업경영시스템학회지
• /
• 제22권50호
• /
• pp.11-21
• /
• 1999

In this paper, an algorithm to generate the mounting position and orientation of SMD is proposed. For the proposed algorithm, we used the image captured from PCB and utilized image processing technique. Pre-processing technique, threshold level determination method, divided recognition of the SMD pattern on a PCB, calculating mounting position and orientation are related topics of this research. All of the related topics were reviewed and the results of this research were obtained from applying the algorithm to the real Surface Mounting Machine(model:MCUl/CPM) made by Samsung Electronics Co.

• 한국콘텐츠학회논문지
• /
• 제15권7호
• /
• pp.30-42
• /
• 2015

본 논문에서는 모바일 P2P 환경에서 질의 처리 정확성 및 통신 비용을 향상시키기 위한 새로운 스카이라인 질의 처리 기법을 제안한다. 제안하는 기법은 사전 스카이라인 구축, 질의 배포 범위 확장 정책과 연속 스카이라인 질의 처리 과정으로 구성된다. 사전 스카이라인에서는 질의 처리 이전에 필터링 객체로 선정될 가능성을 가지고 있는 후보 객체 집합을 선정하여 질의 처리에서의 필터링 비용을 감소시킨다. 질의 배포 범위 확장 정책에서 질의 배포 범위를 확장함으로써 정확성을 향상시킨다. 또한, 최초 스카이라인 질의 처리한 후 모니터링을 수행하여 연속 스카이라인 질의를 처리한다. 제안하는 기법의 우수성을 입증하기 위해 기존 기법과 성능 평가를 수행한 결과 제안하는 기법이 기존 기법보다 우수한 성능을 보였다.

• 한국CDE학회논문집
• /
• 제17권2호
• /
• pp.123-131
• /
• 2012

The requirements for computational resources to perform the structural analysis are increasing rapidly. The size of the current analysis problems that are required from practical industry is typically large-scale with more than millions degrees of freedom (DOFs). These large-scale analysis problems result in the requirements of high-performance analysis codes as well as hardware systems such as supercomputer systems or cluster systems. In this paper, the pre- and post-processing system for supercomputing based large-scale structural analysis is presented. The proposed system has 3-tier architecture and three main components; geometry viewer, pre-/post-processor and supercomputing manager. To analyze large-scale problems, the ADVENTURE solid solver was adopted as a general-purpose finite element solver and the supercomputer named 'tachyon' was adopted as a parallel computational platform. The problem solving performance and scalability of this structural analysis system is demonstrated by illustrative examples with different sizes of degrees of freedom.

• 대한화학회지
• /
• 제43권3호
• /
• pp.307-314
• /
• 1999

대장균의 RNase P의 RNA 성분인 M1 RNA는 대장균 rnpB 유전자의 주요한 일차전사물인 선구-M1 RNA로부터 3'가공으로 생성된다. 이 가공 활성을 가지고 있는 효소 분획을 부분 정제하고 그 특성을 조사하였다. 이 활성 분획을 높은 염농도에 노출시키면 가공 활성이 불활성화하는 것으로 보아, 가공효소는 여러 효소로 이루어진 효소 복합체인 것으로 추정된다. 이 효소 분획은 화학적 핵산 가수분해효소인 납(II) 이온으로 처리하면 효소 활성을 잃지만, 효소 분획 자체에서 추출한 RNA를 가하면 효소 활성을 되찾는다. 이 결과는 효소 활성에는 RNA 분자가 필요하다는 것을 시사한다. 부분 정제한 효소로 형성되는 절단자리들의 분석 결과도, 3'가공과정이 여러 효소에 의하여 일어나고, 적어도 두 가지 다른 경로로 일어난다는 것을 암시한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.737-740
• /
• 1999

This paper deals with a real time optimization algorithm within real time for DRGS(Dynamic Route Guidance System) and evaluate the algorithm. A pre-developed system offers the optimal route in using only static traffic information. In using real-time traffic information, Dynamic route guidance algorithm is needed. The serious problem in implementing it is processing time increase as nodes increase and then the real time processing is impossible. Thus, in this paper we propose the optimal route algorithm with window mechanism for the real-time processing and then evaluate the algorithms.

• 소성∙가공
• /
• 제8권4호
• /
• pp.356-363
• /
• 1999

This paper discusses some techniques for the determination of optimum blank size and pre-form design for multi-stepped deep drawing of oval shell. The deep drawing process of oval shape has been regarded as more difficult than that of cylindrical shell because of its complicated behavior of plastic deformation. But there is insufficient information in this area to carry out successful deep drawing work of irregular products such as oval, rectangular, and square shapes. In order to find the optimum conditions, the drawing apparatus for two kinds of pre-form design are built, a series of drawing experiments performed, and thickness stain distributions measured. From the results of thess suggested experiments, various optimum process variables are observed and discussed.

• 한국멀티미디어학회논문지
• /
• 제7권12호
• /
• pp.1754-1764
• /
• 2004

Lately mobile handheld devices such as Personal Digital Assistant (PDA) and cellular phones are getting more popular for personal web surfing. However, today most mobile handheld devices have relatively poor web browsing capability due to their low performance so their users have to suffer longer communication latency than those of desktop Personal Computers (PCs). In this paper, we propose an effective pre-refresh mechanism for embedded web browser of mobile handheld devices to reduce this problem. The proposed mechanism uses the idle time to pre-refresh the expired web objects in an embedded web browser's cache memory. It increases the utilization of Central Processing Unit (CPU) power and network bandwidth during the idle time and consequently reduces the client's latency and web browsing cost. An experiment was done using a simulator designed by us to evaluate the efficacy of the proposed mechanism. The experiment result demonstrates that it has a good performance to make web surfing faster.

• 소성∙가공
• /
• 제26권1호
• /
• pp.41-47
• /
• 2017

Cyclic behavior of advanced high strength steel sheets was measured using an inverse-optimization approach with pre-straining and bending. First, tensile specimens were pre-strained, and three-point bending was conducted for the pre-strained specimens. By using the inverse finite element optimization, the combined isotropic-kinematic hardening parameters that minimize the error between the measured and predicted bending force-displacement curves. The measured cyclic behavior agreed well with the cyclic behavior measured by sheet tension-compression test, which confirms the validity of the measuring procedure based on inverse optimization.

• 대한전자공학회논문지SD
• /
• 제39권9호
• /
• pp.37-44
• /
• 2002

학습된 신경망(Pre-trained neural network)은 고정된 가중치(weight)를 갖는다. 이 논문에서는 이러한 특성을 이용하여 신경망의 효과적인 디지털 하드웨어의 설계방법을 제안한다. 이를 위해 신경망의 PEs(Processing Elements)연산은 행렬-벡터 곱셈으로 표하고 고정된 가중치와 입력 데이터의 관계를 비트-레벨 어레이(array) 구조로 표현하여, 노드 소거와 가중치 비트 패턴에 따른 공유 노드 설정을 통한 최적화로 연산에 필요한 노드를 최소화한다. FPGA 시뮬레이션 결과, 완전한 정확성에 기반한 하드웨어를 설계하는 경우, 하드웨어 비용을 상당부분 줄였고 동작 주파수가 높다는 것을 확인하였다. 또한, 제안한 설계방법은 한정된 공간 내에서 많은 수의 PEs 구현이 가능함으로, 큰 신경망 모델에 대한 온-칩(on-chip) 구현이 가능하다.