• Transactions of Materials Processing
• /
• v.19 no.1
• /
• pp.11-16
• /
• 2010

The influence of pre-strain on low cycle fatigue behavior of Fe-18Mn-0.05Al-0.6C TWIP steel was studied by conducting axial strain-controlled tests. As-received plates were deformed by rolling with reduction ratios of 10 and 30%, respectively. A triangular waveform with a constant frequency of 1 Hz was employed for low cycle fatigue test at the total strain amplitudes in the range of ${\pm}0.4\;{\sim}\;{\pm}0.6$ pct. The results showed that low-cycle fatigue life was strongly dependent on the amount of pre-strain as well as the strain amplitude. Increasing the amount of prestrain, the number of reversals to failure was significantly decreased at high strain amplitudes, but the effect was negligible at low strain amplitudes. A new model for predicting fatigue life of pre-strained body has been suggested by adding ${\Delta}E_{pre-strain}$ to the energy-based fatigue damage parameter. Also, high-cycle fatigue lives predicted using the low-cycle fatigue data well agreed with the experimental ones.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.50
• /
• pp.11-21
• /
• 1999

In this paper, an algorithm to generate the mounting position and orientation of SMD is proposed. For the proposed algorithm, we used the image captured from PCB and utilized image processing technique. Pre-processing technique, threshold level determination method, divided recognition of the SMD pattern on a PCB, calculating mounting position and orientation are related topics of this research. All of the related topics were reviewed and the results of this research were obtained from applying the algorithm to the real Surface Mounting Machine(model:MCUl/CPM) made by Samsung Electronics Co.

• The Journal of the Korea Contents Association
• /
• v.15 no.7
• /
• pp.30-42
• /
• 2015

In this paper, we propose a new skyline query processing scheme to enhance accuracy of query processing and communication cost in mobile P2P environments. The proposed scheme consists of three stages such as the pre-skyline processing, the query transmission range extension policy, and the continuous skyline query processing. In the pre-skyline processing, a peer selects the candidate filtering objects who have the potential to be selected. By doing so, the proposed scheme reduces the filtering cost when processing the query. In the query transmission range extension policy, we have improved the accuracy by extending the query transmission range. In addition, it can handle continuous skyline query by performing the monitoring after the first skyline query processing. In order to show the superiority of the proposed method, we compare it with the existing schemes through performance evaluation. As a result, it was shown that the proposed scheme outperforms the existing schemes.

• Korean Journal of Computational Design and Engineering
• /
• v.17 no.2
• /
• pp.123-131
• /
• 2012

The requirements for computational resources to perform the structural analysis are increasing rapidly. The size of the current analysis problems that are required from practical industry is typically large-scale with more than millions degrees of freedom (DOFs). These large-scale analysis problems result in the requirements of high-performance analysis codes as well as hardware systems such as supercomputer systems or cluster systems. In this paper, the pre- and post-processing system for supercomputing based large-scale structural analysis is presented. The proposed system has 3-tier architecture and three main components; geometry viewer, pre-/post-processor and supercomputing manager. To analyze large-scale problems, the ADVENTURE solid solver was adopted as a general-purpose finite element solver and the supercomputer named 'tachyon' was adopted as a parallel computational platform. The problem solving performance and scalability of this structural analysis system is demonstrated by illustrative examples with different sizes of degrees of freedom.

• Journal of the Korean Chemical Society
• /
• v.43 no.3
• /
• pp.307-314
• /
• 1999

Ml RNA, the RNA component of RNase P from Escherichia coli, is produced by 3' processing of pre-Ml RNA, a major primary transcript of the rnpB gene. The enzyme fraction containing the processing activity was partially purified and characterized. Since exposure of the active fraction to the high salt condition results in the inactivation of the processing activity, the processing enzyme seems to be an enzyme complex composed of multiple enzymes. The enzyme fraction loses the processing activity when treated with the chemical nuclease lead(II) ion, but regains its activity by the addition of RNA isolated from the enzyme fraction itself, suggesting that an RNA molecule(s) may be essential for the processing activity. Analysis of cleavage sites produced by the partially purified enzyme fraction also implies that the 3' processing occurs by multiple enzymes and at least in two distinct pathways.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.737-740
• /
• 1999

This paper deals with a real time optimization algorithm within real time for DRGS(Dynamic Route Guidance System) and evaluate the algorithm. A pre-developed system offers the optimal route in using only static traffic information. In using real-time traffic information, Dynamic route guidance algorithm is needed. The serious problem in implementing it is processing time increase as nodes increase and then the real time processing is impossible. Thus, in this paper we propose the optimal route algorithm with window mechanism for the real-time processing and then evaluate the algorithms.

• Transactions of Materials Processing
• /
• v.8 no.4
• /
• pp.356-363
• /
• 1999

This paper discusses some techniques for the determination of optimum blank size and pre-form design for multi-stepped deep drawing of oval shell. The deep drawing process of oval shape has been regarded as more difficult than that of cylindrical shell because of its complicated behavior of plastic deformation. But there is insufficient information in this area to carry out successful deep drawing work of irregular products such as oval, rectangular, and square shapes. In order to find the optimum conditions, the drawing apparatus for two kinds of pre-form design are built, a series of drawing experiments performed, and thickness stain distributions measured. From the results of thess suggested experiments, various optimum process variables are observed and discussed.

• Journal of Korea Multimedia Society
• /
• v.7 no.12
• /
• pp.1754-1764
• /
• 2004

Lately mobile handheld devices such as Personal Digital Assistant (PDA) and cellular phones are getting more popular for personal web surfing. However, today most mobile handheld devices have relatively poor web browsing capability due to their low performance so their users have to suffer longer communication latency than those of desktop Personal Computers (PCs). In this paper, we propose an effective pre-refresh mechanism for embedded web browser of mobile handheld devices to reduce this problem. The proposed mechanism uses the idle time to pre-refresh the expired web objects in an embedded web browser's cache memory. It increases the utilization of Central Processing Unit (CPU) power and network bandwidth during the idle time and consequently reduces the client's latency and web browsing cost. An experiment was done using a simulator designed by us to evaluate the efficacy of the proposed mechanism. The experiment result demonstrates that it has a good performance to make web surfing faster.

• Transactions of Materials Processing
• /
• v.26 no.1
• /
• pp.41-47
• /
• 2017

Cyclic behavior of advanced high strength steel sheets was measured using an inverse-optimization approach with pre-straining and bending. First, tensile specimens were pre-strained, and three-point bending was conducted for the pre-strained specimens. By using the inverse finite element optimization, the combined isotropic-kinematic hardening parameters that minimize the error between the measured and predicted bending force-displacement curves. The measured cyclic behavior agreed well with the cyclic behavior measured by sheet tension-compression test, which confirms the validity of the measuring procedure based on inverse optimization.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.9
• /
• pp.37-44
• /
• 2002

This paper proposes efficient digital hardware design method by using fixed weight of pre-trained neural network. For this, arithmetic operations of PEs(Processing Elements) are represented with matrix-vector multiplication. The relationship of fixed weight and input data present bit-level array structure architecture which is consisted operation node. To minimize the operation node, this paper proposes node elimination method and setting common node depend on bit pattern of weight. The result of FPGA simulation shows the efficiency on hardware cost and operation speed with full precision. And proposed design method makes possibility that many PEs are implemented to on-chip.