• Animal Bioscience
• /
• v.34 no.12
• /
• pp.2003-2011
• /
• 2021

Objective: The aim of this study was to evaluate the effect of marinating turkey meat with buttermilk and acid whey on the technological traits and microbiological quality of the product. Methods: Slices of turkey meat muscles were marinated for 12 hours in buttermilk (n = 30), acid whey (n = 30) and comparatively, in lemon juice (n = 30). The control group (n = 30) consisted of unmarinated slices of turkey breast muscles. Physical parameters (pH, water holding capacity, colour L^*a^*b^*, shear force, weight loss) were assessed and quantitative and qualitative microbiological evaluation of raw and roasted products was performed. The microbiological parameters were determined as the total viable counts of mesophilic aerobic bacteria, of the Enterobacteriaceae family, and Pseudomonas spp. Bacterial identification was performed by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. Results: Marinating turkey meat in buttermilk and whey compared to marinating in lemon juice and the control sample resulted in a higher (p<0.05) degree of yellow color saturation (b^*) and a reduction (p<0.05) in the number of mesophilic aerobic bacteria, Pseudomonas spp. and Enterobacteriaceae family as well as the number of identified mesophilic aerobic bacteria in both raw and roasted samples. The lowest (p<0.05) shear force values were found in products marinated in whey. Conclusion: The use of buttermilk and acid whey as a marinade for meat increases the microbiological safety of the product compared to marinating in lemon juice, while maintaining good technological features of the product.

• Journal of Food Hygiene and Safety
• /
• v.3 no.3
• /
• pp.117-129
• /
• 1988

Packaged meal manufacturing establishments in Seoul city and Kyungkido province were assessed in terms of the sanitary conditions and practices, time and temperature, and microbiological quality. Sanitary check-lists were developed to evaluate the sanitary condition of sampled packaged meal manufacturing establishments. Microbiological tests on.food containers, equipments, and foods in various phases of product flow were done. The results of the study are summarized as follows; 1) Sanitary condition of kitchen.and sanitary practices of employees in.large and medium establishments were evaluated as the some improvement required in order to meet all standards. But sanitary practices of employees in small establishments were evaluated as the unsatisfactory state with negligence or ignorance of safe practice. 2) The microbiological quality of basic ingredients and food materials after pre-preparation were poor. 3) Time and temperature data indicated that phases of holding ingredients at room temperature after cooking, assembly and packaging before delivery were critical. 4) Microbiological test results for food containers, equipments indicated that sanitary conditions of stainless steel ware, knife, wiping clothes and cutting board should be improved promptly. 5) Critical control points identified were ingredients, pre-preparation, Holding, and assembly and packaging. 6) Guidelines were suggested for effective quality control of packaged meals production.

• Journal of the Korean Society of Food Culture
• /
• v.11 no.1
• /
• pp.107-121
• /
• 1996

This study was carried out to develop the computer-assisted Hazard Analysis and Critical Control Point (HACCP) program for a systematic approach to the identification, assessment and control of hazards for foodservice manager to assure the microbiological quality of food in hospital foodservice operations. Sanitation practices were surveyed and analyzed in the dietetic department of 4 hospitals. Among them, one 762-bed general hospital was selected as standard model to develop computer-assisted HACCP program. All data base files and processing programs were created by using Foxpro package for easy access of HACCP concept. HACCP program was developed based on the methods suggested by NACMCF, IAMFES and Bryan. This program consisted of two parts: the pre-stage for HACCP study and the implementation stage of the HACCP system. 1. Pre-stage for HACCP study includes the selection of menu item, the development of the HACCP recipe, the construction of a product flow diagram, and printing the HACCP recipe and a product flow diagram. A menu item for HACCP study can be selected from the menu item lists classified by cooking methods. HACCP recipe includes ingredients, their amount and cooking procedure. A flow diagram is constructed based on the HACCP recipe. The HACCP recipe and a product flow diagram are printed out. 2. Implementation of HACCP study includes the identification of microbiological hazards, the determination of critical control points, the establishment of control methods of each hazard, and the complementation of data base file. Potentially hazardous ingredients are determined and microbiological hazards are identified in each phase of the product flow. Critical control points (CCPs) are identified by applying CCP decision trees for ingredients and each process stage. After hazards and CCPs are identified, criteria, monitoring system, corrective action plan, record-keeping system and verification methods are established. When the HACCP study is complemented, HACCP study result forms are printed out. HACCP data base file can be either added, corrected or deleted.

• Korean journal of food and cookery science
• /
• v.2 no.2
• /
• pp.76-83
• /
• 1986

Time and temperature, pH and Aw, and microbiological evaluation were made to identify critical control points during various phases in product flow of chicken soup preparation in a university foodservice establishment. The results are summarised as follows: 1) Time and temperature data indicated that the phases of cooling after cooking, post-preparation, and holding ingredients at room temperature before assembly were critical. 2) pH and Aw values were in favorable for microbial growth. 3) Microbiological data indicated that the phases of basic ingredients. post-preparation and holding ingredients before assembly were critical. 4) Critical control points identified were; basic ingredients, cooling after cooking, post-preparation, holding before assembly and service, and assembly and service. 5) Several guidelines were suggested for the effective qualitly control program.

• Korean journal of food and cookery science
• /
• v.7 no.4
• /
• pp.111-118
• /
• 1991

The purpose of this study was to evaluate nutritional adequacy and microbiological quality of foods served in day-care centers, and to provide basic information and guidelines for the development of computerized standardized recipes and microbiological quality control program. Assessment was conducted for four day-care certers selected from each of the four groups categorized in the basic survey. Nutritional balance and amount of consumption of the food was calculated and microbiological analysis was conducted. The results of the study showed the followings: the nutritional assessment of food served in day-care centers indicated that energy and nutrients contents of foods were below the recommended level (RDA/3), except the case of a university day-care center; the percentage of leftovers for soups and vegetables was high, but that for a la carte was low; fecal coliform was not found in any of samples, however, the number of coliform in the salted Korean radish and salad was higher than guideline for microbial acceptability; the number of coliform checked from the surface of the cutting board was higher than acceptable level in most day-care centers.

• Korean journal of food and cookery science
• /
• v.27 no.4
• /
• pp.55-65
• /
• 2011

This study was performed to analyze the microbiological hazards of ready-to eat sandwiches and to evaluate the effect of implementing a hazard analysis and critical control points (HACCP) for quality improvement of ready-to-eat sandwiches. In total, 174 samples were examined for the microbiological hazard analysis. About 37.4% of the samples had an aerobic plate count ${\geq}$6 log CFU/g, and the numbers of coliforms exceeded 3 log CFU/g in 82.2% of the samples. Additionally, Staphylococcus aureus, E. coli, and Salmonella spp. were detected in 10.3%, 4.6%, 1.1% of sandwiches, respectively. In contrast, E. coli O157:H7, and Listeria monocytogenes were not detected in any of the samples. The results of the microbiological verification after implementing a HACCP throughout the production process indicated that S. aureus, E. coli, Salmonella spp., E. coli O157:H7, and L. monocytogenes were not detected in any of the samples. Consequently, implementing a HACCP is effective for quality improvement of ready-to-eat sandwiches.

• Journal of Nutrition and Health
• /
• v.18 no.4
• /
• pp.283-292
• /
• 1985

A sanitary quality of a university foodservice establishment was assessed in terms of time and temperature, pH and Aw, and microbiological evaluation. Critical control points during various phases in product flow of fried fish cake soup were identified using hazard analysis concept. The results are summarized as follows : 1) Time and temperature data indicated that phases of holding ingredients at room temperature after cooking, and hot - holding of soup before assembly were critical. 2) pH and Aw values were in favorable for microbial growth. 3) Microbiological data indicated that microbial quality of ingredients was in poor condition. A holding practice of cooked ingredients at room temperature might provide the chance for microbial contamination and multiplication. Hot - holding time and temperature of soup should be strictly controlled to assure the food safety, since the microbial quality of serving food can be directly influenced by the hot - holding temperature of soup. 4) Microbiological test results for food containers, equipments, working surfaces, and supplies indicated that sanitary conditions of earthenware, gloves, wiping cloths and cutting board should be improved promptly. 5) Critical control points identified were : ingredients, pre - preparation, post - preparation, and holding before assembly and service. 6) Guidelines for the effective quality control program for this operation were suggested.

• Journal of the East Asian Society of Dietary Life
• /
• v.20 no.4
• /
• pp.551-559
• /
• 2010

This study aimed to determine the physicochemical, microbiological and sensory qualities of salad dressing with added Prunus mume extracts. For this study, dressing was blended with Prunus mume extracts to different concentrations of 0, 10, and 20%. Physicochemical and microbiological effects of dressing with added Prunus mume extracts were assessed during production and storage days by measuring pH and Aw and by determining total plate counts and coliforms. Effects of salad dressing added Prunus mume extracts on the total plate counts and coliforms of salad dressing were observed during storage at $3^{\circ}C$ and $25{\pm}1^{\circ}C$ for 30 days. Prunus mume extracts showed antibacterial properties, and improved the microbiological quality. Sensory scores for salad dressing with added Prunus mume extracts were higher than those for the control group.

• Korean journal of food and cookery science
• /
• v.8 no.2
• /
• pp.137-145
• /
• 1992

A computer-assisted microbiological quality assurance program was developed based on HACCP data obtained from a 500 bed general hospital by assessing time and temperature conditions and microbiological qualities of six categories of menu items according to the process of food product flow. The purpose of the study was to develop a computer-assisted microbiological quality assurance program in order to simplify the assessment procedures and to provide a maximum assurance to foodservice personnel and the public. A 16-Bit personnel computer compatible with IBM-PC/AT was used. The data base files and processing programs were created using dBASE III plus packages. The contents of the computerized system are summarized as knows: 1. When the input program for hazard analysis runs, a series of questions are asked to determine hazards and assess their severity and risks. Critical control points and monitoring methods for CCPs are identified and saved in Master file. 2. Output and search programs for hazard analysis are composed of 6 categories of recipe data file list, code identification list, and HACCP identification of the specific menu item. 3. When the user selects a specific category of recipe from 6 categories presented on the screen and runs data file list, a series of menu item list, CCP list, monitoring methods list are generated. When the code search program runs, menu names, ingredients, amounts and a series of codes are generated. 4. When the user types in a menu item and an identification code, critical control points and monitoring methods are generated for each menu item.

• Culinary science and hospitality research
• /
• v.9 no.4
• /
• pp.81-97
• /
• 2003

The purpose of this study was to evaluate hazard factors in the steps of production, holding and assembly and service of jabchae that were served by contracted management in school meal foodservice. And method of control with the Hazard Analysis Critical Control Point (HACCP)program was suggested. The hazard factors in jabchae product had come from the temperature, time, growth of microbiological equipment and utensils. Almost of raw materials, prepreparation and storage, cooking, holding, serving established the critical control point. It has shown that the microbiological quality of raw materials for jabchae was a little inferior at the time of receiving based on the total plate count(10$^3$∼10 $^{5}$ ), coliform(0∼10$^3$). However microbiological quality become acceptable level by washing and a few disinfection method. Microbiological growth has increased in 3hr at room temperature up to 5.1${\times}$10$^2$ after preparation of jobchae. In conclusion, it is extremly important to reduce hoiding and serving time and to avoid treating food within the danger zone for food safeness. In addition, the prevention of cross-contamination during mixing the ingredients with improper equipment and with insanitary treatments by workers was also important to keep the food safe in this foodservice facility.