• 제어로봇시스템학회논문지
• /
• 제17권3호
• /
• pp.241-247
• /
• 2011

This paper is intended to improve efficiency of two-phase BLDC motor using analytical and statistical methods, and then the stability of the starting for the designed model is investigated. The characteristics of the motor according to magnetization directions of permanent magnet are analyzed through the analytical method, and design variables that affect the efficiency are selected. Preliminary optimal design is performed using the analytical method with the design variable. The RSM (Response Surface Method) based on the FEA (Finite Element Analysis) is applied to complement errors of the analytical method. As a result, the optimal design is determined. Finally, the stability of the starting for the optimal designed model is evaluated by analyzing cogging torque, and it is verified through the FEA.

• 분석과학
• /
• 제8권4호
• /
• pp.575-582
• /
• 1995

A new analytical procedure using a serial dual electrode detector was developed for the analysis of amino acids and proteins. Bromine was generated at the upstream electrode and detected by the downstream electrode. The presence of amino acids and proteins was shown to lower the downstream current but with no apparent effect on the upstream current. This indirect mode of detection can be applied to the determination of amino acids and proteins which are electrochemically inactive or too large to be accessible to the electrode surface for electron exchange. The method is shown capable to determine various amino acids (cystine, tyrosine, lysine, tryptophan, glycine, methionine and arginine) and proteins (cytochrome c, hemoglobin, HAS, a-Amylase, Conalbumin I, Catalase and Myglobin) with linear working range for amino acids between $10^{-6}$ to $10^{-3}M$ and total proteins between $10^{-7}$ to $10^{-3}M$. The method has been applied for the analysis of amino acids and total protein in food using Flow Injection Analysis with results obtained comparable to those using the traditional analytical procedure. Use of pulse generation technique was shown to produce a more stable flow injection analysis peaks for repetitive determination than the use of conventional constant current method which showed increase of the background current after determination over 200 minutes. The pulse method was found to give stable baseline even after 400 minutes. Thus, the method is shown able to provide a suitable analytical procedure for automatic analysis of amino acids and proteins in food by flow injection analysis.

• 전기학회논문지
• /
• 제64권4호
• /
• pp.545-551
• /
• 2015

This paper deals with torque analysis of magnetic spur gear with radial magnetized permanent magnets based on analytical method. The analysis is implemented in three parts: First, on the basis of magnetic vector potential and a two-dimensional (2D) polar-coordinate system, the magnetic field solution due to permanent magnet of source gear are obtained. And by using derived magnetic field solutions, the analytical solutions for external magnetic field distribution which affects load gear are obtained. Second, by using coordinate conversion, external magnetic field which is on the primary coordinate system is converted to the secondary coordinate system. Finally, the load gear is reduced to equivalent current densities, and the torque is computed on these currents in the external field of the source magnet. These analytical results are validated by comparing with the 2-D finite element analysis (FEA).

• 한국산업보건학회지
• /
• 제28권1호
• /
• pp.108-116
• /
• 2018

Objectives: This study investigated to the analytical work environment, analyst's expert and status of analytical instrument in the designated organization's laboratory for measuring work environment, and carried out to ensure reliability of analytical results. Methods: This study was conducted by 114 analysts who work in designated organization's laboratory for measuring work environment. Information on the working environment and personal characteristics of the analysts were collected using a self-reported questionnaire and were analyzed using the SPSS program through analysis of frequency and t-test. Results: The speciality of subjects was occupational health(57.0%), environmental health(38.6%) and environmental engineering(4.4%), and they had a higher level of academic ability than workers in other industries. Analysts had to handle a large number of sample analysis and many tasks other than analytical work. The analysts answered that it was difficult to analyze organic substances than inorganic substances, and the difficult parts were the analytical methods setting of new substances(55.3%), instrument analysis(24.6%) and principle of analysis(23.7%). Analytical instruments mainly have legally required instruments. The difficulty of the analysis is solved from the senior analyst in the laboratory and analytical information is mainly exchanged through seminar organized by the Association of Occupational Health Analysts. The analysts who are planning to move or considering the company were 48.2%, and the reasons for moving the company were difficult to work(14.0%), low salary(9.6%), employment type(8.8%) and job stress(7.0%). Conclusions: The conclusions of our study were that it was possible to secure reliability by solving the problems such as implementing professional education to improve expertise of analysts, strengthening analytical instruments through institutional improvement and improving work environment.

• 분석과학
• /
• 제11권6호
• /
• pp.499-504
• /
• 1998

An analytical method for the simultaneous measurement of trace Cu, Sn, and Bi in sea water has been investigated by Inductively Coupled Plasma-Mass Spectrometry. Amberlite IRC-718 resin was used as a solid phase in solid-liquid extraction technique for the removal of matrix interferences such as Na, S, P, and other polyatomic ion species. Recoveries of 99.8% for Cu, 99.6% for Sn, and 97.9% for Bi were obtained for the standard spiked sample. The developed method was applied to analysis of trace metals in sea water.

• 분석과학
• /
• 제15권5호
• /
• pp.433-438
• /
• 2002

국제원자력기구로부터 제공받은 2종 (V-50, P-50)의 인공적으로 준비된 여과지상의 도시분진시료중의 미량원소를 중성자방사화분석법을 사용하여 비파괴 분석하였다. 중성자방사화분석의 품질관리를 위해 미국표준기술원의 인증표준물질 (Urban Particulate Matter, NIST SRM1648)이 사용되었으며 여과지상의 분진시료에서는 약 20종의 원소를 분석하였다. 측정결과는 실험실간 비교 및 숙련도 평가를 위하여 중성자방사화분석법, 하전입자유도 X-선 방출분광법, 유도결합플라즈마 질량분석법 등을 이용한 세계 40개국, 49개 실험실의 분석값들과 함께 통계처리 되었다. 통계 처리한 결과, 본 실험실의 분석값들의 Z-score가 ${\pm}2$ 이내에 들어오는 결과를 얻었으며, 숙련도 시험도 분석된 모든 원소의 정확도와 정밀도가 기준에 통과되는 신뢰성 있는 결과를 얻어 현재 수행하고 있는 대기분진시료들의 분석품질관리가 적합함을 입증하였다.

• 분석과학
• /
• 제16권5호
• /
• pp.358-367
• /
• 2003

이 연구는 먼저 침전물 속에 major 원소 (Al, Ca, K, Fe, Mg)를 측정하기위해 ICP-MS를 이용하여 분석방법을 개발하였다. Cool ICP-MS로 major원소를 분석한 결과 Normal ICP-MS보다 더 좋은 분석 결과를 얻었다. 또한 그 결과를 NAA의한 분석 결과와 비교해 보았다. NAA는 고체시료의 비파괴 미량분석법이며 침전물 속에 major원소들에 대한 측정 결과는 ICP-MS보다 더 좋은 결과를 얻었다. 또한 침전물 속에 minor 원소 (Cr, Ce, U, Co, Pb, As, Se)를 측정하기 위해 ICP-MS를 이용하여 분석방법을 개발하였다. 표준 검정곡선으로 분석한 결과 모체방해효과 때문에 정확도가 좋지 않았다. 그래서 ICP-MS를 이용하여 내부표준물법으로 minor 원소들을 분석했을 때 결과값이 향상됨을 알 수 있었다. 그 결과를 NAA분석법과 비교해도 ICP-MS를 이용한 방법이 더 좋은 결과였음을 알 수 있었다. 두 가지의 분석방법은 침전물 속에 존재하는 minor 원소를 충분히 측정할 수 있다. 그러므로 NAA 분석법이 모체가 복잡한 환경시료를 분석하는데 중요한 역할을 하며, ICP-MS 또한 NAA 분석법으로는 분석 할 수 없는 납을 검출할 수 있기 때문에 환경시료를 분석하는데 두 분석법은 상호 보완할 수 있는 중요한 분석법이다.

• KCI Concrete Journal
• /
• 제13권2호
• /
• pp.19-25
• /
• 2001

A simple expression to predict bond strength of reinforcing bars with rib deformation to the surrounding is derived for the case of splitting bond failure. Finite element analysis is used to model the confining behavior of concrete cover. The roles of the interfacial properties, specifically, the friction coefficient, cohesion, the relative rib area and the rib face angle are examined. Values of bond strength obtained using the analytical model are in good agreement with the bond test results from the previous studies. The analytical model provides insight into interfacial bond mechanisms and the effects of the key variables on the bond strength of deformed bars to concrete. Based on the comparison between the analytical results and the test results, the values of cohesion, coefficient of friction, and the effective rib face angle are proposed.

• 대한기계학회논문집A
• /
• 제31권7호
• /
• pp.800-807
• /
• 2007

Autofrettage process is used for internal forming and sizing of cylinder designed to withstand high internal pressures. Once the tube is autofrettaged, it needs to be machined to its final dimensions both at the bore and its outer surface. This paper presents an analytical analysis and numerical analysis of machined compound cylinder using finite element code, ANSYS10.0. An analytical model for predicting the level of autofrettage following either inner, outer, or combined machining of the compound cylinder is developed for the autofrettage residual stress field is simulated by an autofrettaged pressure. The autofrettaged pressures are obtained by using trying-error method. As autofrettage percentage is 20 % and 40 %, the numerical results are found to be in almost agreement with the analytical ones. However, as autofrettage percentage is 60 %, the numerical results have a little difference with the analytical ones.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 가을 학술발표회 논문집
• /
• pp.503-510
• /
• 2004

One of the methods improving the seismic behavior of a structure is the frame with reduced beam section (RBS) which cuts a segment of flanges of the beam near the beam-to-column connection so that the section with reduced flanges has smaller flexural strength than the beam end. It is difficult to analyze the RBS frame because RBS portion has circular-cut type flange. And inelastic response of the steel frame with the RBS is very sensitive to the RBS model. In this paper, the analytical models of RBS portion are investigated and the results of the inelastic analysis for RBS analytical models are compared and then the analytical model for RBS is determined based on the results of inelastic analysis. Inelastic behavior of the RBS frame and its dynamic characteristics are investigated for selected analytical model of RBS.