• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.539-544
• /
• 2000

The purpose of this study is to develop the mechanical anchorage, namely MAB-BOP (Mechanical Anchorage of 90$^{\circ}$ Hooked Bars with BOlt nad Plate) of the beam-column joint in precast concrete framed structures. Six specimens simulating typical interior beam-column joints were tested to investigate the mechanical characteristics of MAB-BOP. Of primary interest was the measurement of the slip of the anchored bar. Th load-slip curve obtained from this test were used to compare the mechanical performances of the different anchoring methods. Based on the test results, it was found that MAB-BOP showed sufficient anchoring strength capacity compared to 90$^{\circ}$ hooked bar method. So, MAB-BOP can be used as the anchoring methods of the reinforcing bars in PC beam-column joint.

• 한국언어정보학회지:언어와정보
• /
• 제3권2호
• /
• pp.67-83
• /
• 1999

This paper attempts to provide an account for the problems of intensional opacity of referring expressions and the presupposition inheritance in the belief contexts from the discourse perspective. I discuss Jaszczolt's discourse model based on DRT to account for the belief reports. Jaszczolt analyzes referring expressions in terms of the three readings(de re, de $dicto_1$ and de $dicto_2$) and attempts to represent the differences between them in the DRS's via different anchoring modes; external anchoring, formal anchoring and nonanchoring. I propose an extended model to account for the presupposition inheritance in the belief contexts and attempt to analyze the data in Korean based on this model. The differences in the PI and in the representations of DRS's which are induced by the different complement types, ${\ldots}ko(mitta)\;and\;{\ldots}kesul(mitta)$, are discussed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.191-194
• /
• 2005

Evaluating methods of the polar and/or azimuthal anchoring strength coefficients by means of the renormalized transmission spectroscopic ellipsometry are demonstrated. The Anchoring strength coefficients can be evaluated from the measurement of ellipsometric parameters measured by the oblique incident transmission ellipsometry, where the effect of multiplebeam interference is eliminated. The device parameters such as the pretilt angle and cell gap can be determined simultaneously even in the case of the twisted nematic liquid crystal sample cells.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.324-327
• /
• 2005

We propose a novel technique for evaluating the azimuthal anchoring strength of the alignment film on the nematic liquid crystal (LC). In our evaluation, a unique cell, which has two domain in one cell, was used; one is hybrid aligned nematic (HAN) region, the other is twsited nematic (TN) region (viz. HAN/TN two domain cell). From the comparison of director angles on the front substrate with each region, we are able to determine the angle between easy axis and real director axis on the front substrate. From this evaluation, the azimuthal anchoring strength was obtained accurately.

• 한국전기전자재료학회논문지
• /
• 제18권11호
• /
• pp.1028-1032
• /
• 2005

Liquid crystal (LC) alignment using a photoalignment method by irradiation of polarized ultraviolet (UV) on an alignment layer has been investigated. Photoalignment method exhibits weaker anchoring energy than rubbing method so that we have studied electro-optic characteristics of fringe-field switching (FFS) mode with alignment layers using the photo and rubbing alignment methods. The cell using photo alignment layer shows lower threshold and operation voltage than those using rubbed alignment layer. Also, the former method shows higher transmittance than that of the latter.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.87-90
• /
• 2009

A dual-cell-gap transflective liquid crystal display (TR-LCD) with identical response time in the transmissive and reflective regions is demonstrated. In the transmissive region, strong anchoring energy condition is used to decrease the response time, while in the reflective region weak anchoring energy condition is used to increase the response time. The simulated dual-cell-gap TR-LCD has good performances.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.531-533
• /
• 2007

A new method is developed for the measurement of twist angles of LC molecules in an LC panel with angular resolution of 0.01degree, which allows measurement of LC panels with small twist angles. The method is based on the analysis of the change in polarization state of a light beam as it passes through the LC panel in test is rotated in-plane. Compared to other traditional method, including the analysis of transmittance change, our method is more sensitive and more precise. This method allows accurate determination of anchoring energy and close analysis of the rubbing process in the fabrication of IPS mode LC panels.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.17-20
• /
• 2004

FRP strengthening system that bonds FRP sheet or laminate underneath structure has been used popularly thesedays. The failure of this bonding system occurs mainly at the interface of bonded surface abruptly. So it is difficult to expect the failure and FRP can't show its full material capacity that makes it uneconomically. By that reason, KICT proposed a system to install FRP aminate to structure for strengthening not by bondging but by unbonding. It is to install both ends of FRP laminate by anchoring underneath structure without bonding. Then, the failure is not an interfacial problem any more, it is governed by mechanical anchoring. This paper includes an experimental study about anchoring system for prestressing CFRP laminate.

• Journal of Information Display
• /
• 제4권1호
• /
• pp.1-8
• /
• 2003

Recent progress in both low pretilt and high pretilt defect free C1 surface stabilized ferroelectric liquid crystal (SSFLC) devices is reviewed. First, by numerical calculation to investigate the balance between surface azimuthal anchoring energy and bulk elastic energy within the confined chevron layer geometry of C1 and C2, it is possible to achieve a zigzag free C1 state by low azimuthal anchoring alignment with a low pretilt angle. The critical azimuthal anchoring coefficient for defect free C1 state is calculated. Its relationship with elastic constant, chevron angle as well as surface topography effect are also discussed. Second, using $5^{\circ}$ oblique SiO deposition alignment method a defect free, large memory angle, high contrast ratio and bistable C1 SSFLC display, which has potential for electronic paper applications has also been developed. The electrooptical properties and bistability of this device have been investigated. Various aspects of defect control are also discussed.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.67-72
• /
• 2006

Questionnaire survey on performance requirement of ship’s speed such as not only accuracy but also response and robustness were carried out, and the experiments to survey the GPS performances of static and dynamic characteristics were carried out simultaneously. In this paper, the questionnaire survey focusing on docking maneuvering, some analytic results of the survey, the results of GPS performance, and the possibility of adaptation for docking maneuvering on SDME and GPS are discussed. Consequently, from the results of questionnaire survey the performance requirement of ship’s speed in docking/anchoring maneuvering have need under 1cm/sec on the standard deviation, and speed information from GPS was adopted to use maneuvering information in docking/anchoring.