• 대한치과보철학회지
• /
• 제42권4호
• /
• pp.397-411
• /
• 2004

Purpose: The purpose of this study was to determine the effect of anchorage systems and palatal coverage of denture base on load transfer in maxillary implant-supported overdenture. Material and methods: Maxillary implant -supported overdentures in which 4 implants were placed in the anterior region of edentulous maxilla were fabricated, and stress distribution patterns in implant supporting bone in the case of unilateral vertical loading on maxillary right first molar were compared with each other depending on various types of anchorage system and palatal coverage extent of denture base using three-dimensional photoelastic stress analysis. Two photoelastic overdenture models were fabricated in each anchorage system to compare with the palatal coverage extent of denture base, as a result we got eight models : Hader bar using clips(type 1), cantilevered Hader bar using clips(type 2), Hader bar using clip and ERA attachments(type 3), cantilevered milled-bar using swivel-latchs and frictional pins(type 4). Result: 1. In all experimental models, the highest stress was concentrated on the most distal implant supporting bone on loaded side. 2. In every experimental models with or without palatal coverage of denture base, maximum fringe orders on the distal ipsilateral implant supporting bone in an ascending order is as follows; type 3, type 1, type 4, and type 2. 3. Each implants showed compressive stresses in all experimental models with palatal coverage of denture base, but in the case of those without palatal coverage of denture base, tensile stresses were observed in the distal contralateral implant supporting bone. 4. In all anchorage system without palatal coverage of denture base, higher stresses were concentrated on the most distal implant supporting bone on loaded side. 5. The type of anchorage system affected in load transfer more than palatal coverage extent of the denture base. Conclusion: To the results mentioned above, in the case of patients with unfavorable biomechanical conditions such as not sufficient number of supporting implants, short length of the implant, and poor bone quality, selecting a resilient type attachment or minimizing the distal cantilevered bar is considered to be an appropriate method to prevent overloading on implants by reducing cantilever effect and gaining more support from the distal residual ridge.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제29권4호
• /
• pp.245-248
• /
• 2003

The retraction of anterior teeth could be performed more easier by inducing of skeletal anchorage system rather than by conventional method on orthodontic treatment. But, we wonder how effective the system draws well without anchorage loss and draws anterior teeth aside posteriorly, and if the system can reduce the time, in comparison with the anchorage of posterior teeth. For that reason we have studied on the subject of patients, who were required the maximum anchorage on orthodontic treatment and the cases without crowding. The subjects of the experimental group are 35 areas of 20 people who were inserted miniscrews after Mx or Mn 1st premolar extracted. Also, the subjects of the control group are 81 areas of 45 people who were not inserted miniscrews. Compared the anchorage loss of experimental group with control one, we could get the result that the anchorage loss of experimental group is $1.034{\pm}0.891mm$ and control group is $2.790{\pm}1.882mm$(P<0.01). Compared the space closing time of experimental group with control one, we could get the result that the space closing time of experimental group is $369.40{\pm}110.81$days and control group is $406.56{\pm}231.63$days. But the result of comparing space closing time has no significance in statistics. We recognized that the experimental group is more faster than the control group in the canine retraction velocity from the result ; the speed of a experimental group has as much as $0.60{\pm}0.23mm/30days$ while the speed of a control group has $0.44{\pm}0.35mm/30days$(P<0.05). So, we could convince that orthodontic miniscrew is used effectively in the cases required the maximum anchorage.

• Structural Engineering and Mechanics
• /
• 제15권6호
• /
• pp.609-628
• /
• 2003

Mechanical anchorage devices are generally tested in the laboratory and may be analyzed using the finite element method. These devices are composed of many components interacting through diverse contact interfaces. Generally, a Coulomb friction law is sufficient to take into account friction between smooth surfaces. However, in the case of mechanical anchorages, a gripping system, named herein the wedge-tendon system, is used to anchor the prestressing tendon. The wedge inner surface is made of a series of triangular notches designed to grip the tendon. In this particular case, the Coulomb law is not adapted to simulate the contact interface. The present paper deals with a new constitutive contact/gripping law to simulate the gripping effect. A parameter identification procedure, based on experimental results as well as on a finite element/neural network approach, is presented. It is demonstrated that all parameters have been selected in a satisfactory way and that the proposed constitutive law is well adapted to simulate the wedge gripping effect taking place in a mechanical anchorage device.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.157-160
• /
• 2006

Carbon fiber reinforced polymer (CFRP) laminates can be used more efficiently in strengthening applications by applying prestress to the CFRP laminates. A key problem for prestressing with CFRP laminates is anchoring the laminates. These may include fracture to the CFRP laminates due to excessive gripping force or slippage of the CFRP laminates out of the anchorage zone caused by low friction between the anchor device and the lamiantes. The main objective of this study is the development of an applicative wedge-type anchorage system for prestressed CFRP laminates through experimental study. The experimental parameters were the type of anchorage and the effect of elastic modulus of tab. The test results showed that the developed anchor assures 100% CFRP laminate strength.

• 대한치과의사협회지
• /
• 제42권1호통권416호
• /
• pp.7-14
• /
• 2004

Molar extrusion is a quite common problem in prosthodontic patients. It is caused due to the loss or infraocclusion of opposing teeth. A more conservative approach than reduction of the coronal part of extruded tooth is to intrude the malaligned molar orthodontically. Several authors have presented the cases of molar intrusion, by cither removable or fixed appliances. However, the design of those appliances was complex so that many teeth were included as an anchorage unit. This increased the patient's discomfort inevitably. Moreover, the results could be unpredictable. Instead of these conventional methods, skeletal anchorage has been suggested for ideal force system to intrude a molar without any side effects. Many recent clinical reports presented the cases using microscrew or miniplate as a direct anchorage, which included some limitation. The purpose of this report is to introduce the indirect skeletal anchorage for intrusion of extruded maxillary molar.

• 한국구조물진단유지관리공학회 논문집
• /
• 제10권2호
• /
• pp.102-110
• /
• 2006

본 논문에서는 원통형 정착구를 사용하고 외부 긴장재로 보강된 강 I형 보의 극한거동을 실험을 통하여, 초기 긴장력, 편심거리, 강연선의 개수 및 단면적의 변수에 대한 보강 효과를 분석하였다. 실험을 통해 초기 긴장력 보다 강연선의 개수, 단면적, 편심거리를 크게 하는 것이 보강에 더 효과적인 것으로 나타났다. 제안된 원통형 정착 시스템은 이러한 변수를 적용함에 있어 용이하다는 장점을 가지고 있다. 그 결과로 원통형 정착 시스템이 강주형의 보강에 효율적이고 적용성이 있음을 입증하였다.

• 대한토목학회논문집
• /
• 제28권5A호
• /
• pp.657-664
• /
• 2008

사장교 케이블은 구조적으로 휨강성과 감쇠력이 작아 풍우에 의해 쉽게 유해진동이 발생한다. 이러한 풍우진동을 저감시키기 위한 효과적인 방법으로 부가댐퍼를 장착하여 케이블의 감쇠력을 증가시키는 제어시스템이 널리 사용되어왔다. 그러나 사장교의 장대화로 인해 구조적으로나 미적으로 충분한 감쇠력을 제공할 수 있는 위치에 부가댐퍼를 장착하기 어렵게 되었다. 최근 본 저자는 사장교의 미관을 해치지 않으면서 기존의 제어시스템보다 효과적으로 케이블의 진동을 저감시킬 수 있는 새로운 개념의 사장교 케이블 진동 제어시스템을 제안하였다. 본 논문에서는 기존의 연구를 확장하여 새그(Sag)를 고려한 Movable anchorage 시스템을 제안하였으며, 수치해석을 통한 제어성능을 평가하였다. 수치해석의 결과 제안된 시스템은 새그를 고려하였을 때에도 고려하지 않은 경우와 마찬가지로 베어링장치의 강성이 작을수록 기존의 비감쇠 시스템이나 일반적인 수동제어시스템보다 훨씬 좋은 성능을 나타내었다. 제안된 시스템에 있어서 최적의 제어성능을 제공하기 위해서는 새그의 크기를 고려해서 최적의 감쇠계수를 결정해야 할 것으로 사료된다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권2호
• /
• pp.171-180
• /
• 2008

본 논문의 목적은 채널형 단부정착장치를 사용하여 CFRP판으로 보강한 철근콘크리트 보의 구조적 거동을 평가하는 것이다. 총 12개의 시험체를 제작하였으며, 이 중에는 보강판의 효율성을 높이기 위해 채널형 단부정착장치를 사용한 시험체와 사용하지 않은 시험체가 있다. 모든 시험체의 단면 크기는 동일하며, 주철근량과 콘크리트의 강도를 변화시켰다. 하중재하는 모든 시험체에서 4점 휨시험으로 진행되었으며, 각 재료의 변형률, 균열, 하중, 및 파괴모드가 시험 중에 측정되었다. 모든 시험체의 시험결과는 변형, 강도, 그리고 파괴모드 측면으로 분석되었다. 실험결과에 대한 분석를 통해서 채널형 단부정착장치를 사용한 RC보는 그 파괴모드가 급작스런 부착파괴에서 변형이나 강도적 측면에서 구조적 성능이 매우 향상된 연성적 파괴모드로 전환되는 것을 확인할 수 있었다.

• 한국건축시공학회지
• /
• 제5권4호
• /
• pp.139-144
• /
• 2005

A ground anchor system is used as a load carrying element in soil work. The conventional systems with ground anthers bring about the anchorage loss of wedges when anchors are installed for the support of soil structures. Hence we developed the new type of anchor system using both the spacing apparatus and spring (length 60mm, diameter 6mm). In this system, we tan directly check the condition of wedges and PS strands and modify the problems with the slip and anchorage of wedges under construction. For demonstrating the superiority of this system, we carried out a series of the laboratory test. Consequently, we can obtain satisfactory result (18.99$\%$ reduction to the loss of conventional systems). Moreover, the replacement of wedges is easy and simple when retensioning of strands.

• 한국지진공학회논문집
• /
• 제27권1호
• /
• pp.69-75
• /
• 2023

In Korea, most nuclear power plants were designed based on the design response spectrum of Regulatory Guide 1.60 of the NRC. However, in the case of earthquakes occurring in the country, the characteristics of seismic motions in Korea and the design response spectrum differed. The seismic motion in Korea had a higher spectral acceleration in the high-frequency range compared to the design response spectrum. The seismic capacity may be reduced when evaluating the seismic performance of the equipment with high-frequency earthquakes compared with what is evaluated by the design response spectrum for the equipment with a high natural frequency. Therefore, EPRI proposed the inelastic energy absorption factor for the equipment anchorage. In this study, the seismic performance of welding anchorage was evaluated by considering domestic seismic characteristics and EPRI's inelastic energy absorption factor. In order to reflect the characteristics of domestic earthquakes, the uniform hazard response spectrum (UHRS) of Uljin was used. Moreover, the seismic performance of the equipment was evaluated with a design response spectrum of R.G.1.60 and a uniform hazard response spectrum (UHRS) as seismic inputs. As a result, it was confirmed that the seismic performance of the weld anchorage could be increased when the inelastic energy absorption factor is used. Also, a comparative analysis was performed on the seismic capacity of the anchorage of equipment by the welding and the extended bolt.