• Natural Product Sciences
• /
• v.17 no.1
• /
• pp.45-50
• /
• 2011

Sophisticated modern research tools for evaluation of medicinal plants are available but microscopic methods are one of the simplest and cheapest methods to establish the identity of the source materials. Pharmacognostical investigation of the dried, powdered and anatomical sections of the fruits of Trachyspermum roxburghianum (DC) Craib was carried out to determine its macro and microscopical characteristics along with its physical constants. Externally, the fruits, yellowish or greenish brown in colour are elongated, elliptical, slightly curved, prominently ridged and longitudinal. As seen in transectional views of the fruits from Trachyspermum roxburghianum, the mericarp has concave sides called commissural surfaces and a convex outer side called the dorsal surface. The mericarp has three primary ridges alternating with two secondary ridges on the dorsal side. On the commissural side, there are two primary ridges which are lateral in position and two secondary ridges in the commissural side. The seed is attached to the pericarp by a short stalk called a raphe. Circular, four-lobed calcium oxalate crystals are fairly abundant in the endosperm. Phytochemical studies revealed the presence of phenolic compounds, triterpenoids, proteins and sugars. The pharmacognostical profile of the fruits will assist in standardization for quality, purity and sample identification.

• Korean Journal of Acupuncture
• /
• v.33 no.3
• /
• pp.95-101
• /
• 2016

Objectives : This study aims to overview the therapeutic mechanism of back-shu points in terms of sympathetic visceral motor nervous system. Methods : Studies about autonomic nervous system, and studies and ancient texts about back-shu points were reviewed. We interpreted possible mechanism of back-shu points considering similarities of anatomical and physiological characteristics of back-shu points and visceral motor nervous system. Results : Afferent signals for organ lesions that can develop the symptoms of autonomic neurological symptoms, pain, hyperalgesia through the skin segment. Through a physical examination of the myotome and dermatome, it is possible to diagnose segmental disorders. Treatment stimulation of the thick fibers of the disorder segment skin can reduce abnormal autonomic influence over the sympathetic reflex mechanism. In addition, if spinal muscles are relaxed, the pressure on the nerve roots could be reduced and consequently the hyperactivity of the sympathetic visceral motor signal would be suppressed. Conclusions : The back-shu points treatments work through the mechanism of the sympathetic nervous reflex. Moreover, segmental acupuncture can reduce tension of the spinal muscles, thereby improving pathological conditions of the sympathetic nervous system.

• The Journal of the Korean bone and joint tumor society
• /
• v.1 no.2
• /
• pp.181-188
• /
• 1995

Malignant tumor of the pelvic bone has nonspecific symptom and it is not easily detected by physical examination or by radiologic study in early stage, because of its anatomical characteristics. Associated with their variety of disease entity, the treatment of malignant pelvic bone tumor is a problematic point. We have analysed 36 cases of malignant pelvic bone tumors diagnosed at the Severance hospital from 1968 to 1993 to provide a reference for diagnosis and treatment of the malignant pelvic bone tumors. We found that the chondrosarcoma(27.8%) and the osteogenic sarcoma(27.8%) were the most common type of pelvic bone malignancy, and then, in the order of incidence, there were Ewing's sarcoma(16.7%), malignant fibrous histiocytoma(11.1%). There were differences of the age distribution among each diseases and the average age was Ewing's sarcoma 20.5, osteogenic sarcoma 27.2, chondrosarcoma 40.0, malignant fibrous histiocytoma 64.8, respectively. Three of the 5 patients with low grade tumors survived(60%), whereas 3 of the 17 patients with high grade tumors survived(18%). The survival rate of the low grade malignant group was 60%, the high grade was 18%.

• Journal of the Korean Society of Costume
• /
• v.54 no.8
• /
• pp.147-162
• /
• 2004

The purpose of this study is to investigate the characteristics of Grotesque in Contemporary Fashion. The study selected the 1990's or after fashion material by the material of both $pr{\hat{e}}t-{\grave{a}}-porter$ collection and haute couture collection based on Europe. These days, the characteristics of grotesque have been categorized into four groups based on the theory of representative scholars of the Post Modernism era. The results are as follows. ${\cdot}$ The devilism creates shocking and destructive cruelty and fear by using frightening object and mysterious and devilish motif which symbolize the death of fashion ${\cdot}$ Hatred produces physical destroy of human body, anatomical expression inside human body, cruelty by naked sex expression, pains, cruel treatment, disillusion and unpleasantness, which have been caused by the disturbance and ideological confrontation of the society, and is said to be a kind of self-confession against dislike and fear of the disclosure of human existence. ${\cdot}$ Playfulness distorts and exaggerates clothes and human body forms, and produces abnormality and mystery because of vague sex identity. The playfulness of fashion can open fixed and closed world and lead it flexibly. ${\cdot}$ Heterogeneity is divided into both primitiveness and virtuality The primitiveness distorts or transforms human body through the human body decoration of primitive race, and expresses a grotesque form combining human being and other animals. It gives a question to the existence of alienated and suppressed life through the world. in which everything is mixed and not separated. The virtuality introduces not only cyborg form combining human being and machines but also state of the art technology factors, so that it emphasizes non-mechanical and non-human grotesque images.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.721-729
• /
• 2015

Wood properties depend on not only environmental factors such as soil, climate change, or forest stand characteristics, but also silviculture practices such as thinning, regeneration, or selection. This study report influences of the extent of thinning intensity from no thinning, moderate and heavy thinning to the wood property of Quercus acuta forest stands in Wan-do arboretum, Jeollanam-do Province. The results showed that there were close relationships between thinning intensity and anatomical, physical or mechanical properties of Quercus acuta wood. Especially, there are close relationships between thinning intensity and ring width or mechanical properties of wood. As a result, this study showed high correlations between Quercus acuta wood properties and thinning intensity of Quercus acuta forest stand. These findings are expected to be very useful as fundamental data for the implementation of silviculture practices of this specie to produce timber.

• Journal of Veterinary Science
• /
• v.25 no.2
• /
• pp.29.1-29.11
• /
• 2024

Background: Preservation of biological tissues has been used since ancient times. Regardless of the method employed, tissue preservation is thought to be a vital step in veterinary surgery teaching and learning. Objectives: This study was designed to determine the usability of chemically preserved cadaveric equine heads for surgical teaching in veterinary medicine. Methods: Six cadaveric equine heads were collected immediately after death or euthanasia and frozen until fixation. Fixation was achieved by using a hypertonic solution consisting of sodium chloride, sodium nitrite and sodium nitrate, and an alcoholic solution containing ethanol and glycerin. Chemically preserved specimens were stored at low temperatures (2℃ to 6℃) in a conventional refrigerator. The specimens were submitted to gross and organoleptic assessment right after fixative solution injection (D0) and within 10, 20, and 30 days of fixation (D10, D20, and D30, respectively). Samples of tissue from skin, tongue, oral vestibule, and masseter muscle were collected for histological evaluation at the same time points. Results: Physical and organoleptic assessments revealed excellent specimen quality (mean scores higher than 4 on a 5-point scale) in most cases. In some specimens, lower scores (3) were assigned to the range of mouth opening, particularly on D0 and D10. A reduced the range of mouth opening may be a limiting factor in teaching activities involving structures located in the oral cavity. Conclusions: The excellent physical, histologic, and organoleptic characteristics of the specimens in this sample support their usability in teaching within the time frame considered. Appropriate physical and organoleptic characteristics (color, texture, odor, and flexibility) of the specimens in this study support the use of the method described for preparation of reusable anatomical specimens.

• Journal of Korean Society of Forest Science
• /
• v.16 no.1
• /
• pp.33-62
• /
• 1972

Pitch pine (Pinus rigida Miller) in Korea has become one of the major silvicultural species for many years since it was introduced from the United States of America in 1907. To attain the more rational wood utilization basical researches on wood properties are primarily needed, since large scale of timber production from Pitch Pine trees has now been accomplishing in the forested areast hroughout the country. Under the circumustances, this experiment was carried out to study the wood anatomical, physical and mechanical properties of Pitch Pine grown in the country. Materials used in this study had been prepared by cutting the selected pitch pine trees from the Seoul National University Forests located in Suwon. To obtain and compare the anatomical and physical properties of the different parts of tree such as stem, branch, top and rootwood, this study had been divided into two categories (anatomical and physical). For the anatomical study macroscopical and microscopical features such as annual ring, intercellular cannal, ray, tracheid, ray trachid, ray parenchyma cell and pit etc. were observed and measured by the different parts (stem, branch, root and topwood) of tree. For the physical and mechanical properties the moisture content of geen wood, wood specific gravity, shrinkage, compression parallel to the grain, tension parallel and perpendicular to the grain, radial and tangential shear, bending, cleavage and hardness wree tested. According to the results this study may be concluded as follows: 1. The most important comparable features in general properties of wood among the different parts of tree were distinctness and width of annual ring, transition from spring to summerwood, wood color, odor and grain etc. In microscopical features the sizes of structural elements of wood were comparable features among the parts of tree. Among their features, length, width and thickness of tracheids, resin ducts and ray structures were most important. 2. In microscopical features among the different parts of tree stem and topwood were shown simillar reults in tissues. However in rootwood compared with other parts on the tangential surface distinctly larger ray structures were observed and measured. The maximum size of unseriate ray was attained to 27 cell ($550{\mu}$) height in length and 35 microns in width. Fusiform rays were formed occasionally the connected ray which contain one or several horizontal cannals. Branchwood was shown the same features like stemwood but the measured values were very low in comparing with other parts of tree. 3. Trachid length measured among the different parts of tree were shown largest in stem and shortest in branchwood. In comparing the tracheid length among the parts the differences were not shown only between stem and rootwood, but shown between all other parts of tree. Trachid diameters were shown widest in rootwood and narrowest in branchwood, and the differences among the different parts were not realized. Wall thickness were shown largest value in rootwood and smallest in branchwood, and the differences were shown between root and top or branchwood, and between stem and branch or top wood, but not shown between other parts of tree. 4. Moisture contents of green wood were shown highest in topwood and lowest in heartwood of stem. The differences among the different parts were recognized between top or heartwood and other parts of tree, but not between root and branchwood or root and sapwood. 5. Wood specific gravities were shown highest in stem and next order root and branchwood, but lowest in topwood. The differences were shown clearly between stemwood and other parts of tree, but not root and branchwood. However the significant difference is realized as most lowest value in topwood. 6. In compression strength parallel to the grain compared among the different parts of tree at the 14 percent of moisture content, highest strength was appeared in stem, next order branch and rootwood, but lowest in topwood. 7. In bending strength compared among the different parts of tree at the 14 percent of moisture content clearly highest strength was shown in branchwood, next order stem and root, but lowest in topwood. Though the branchwood has lower specific gravity than stemwood it was shown clearly high bending strength.

• Journal of the Korea Convergence Society
• /
• v.12 no.8
• /
• pp.1-11
• /
• 2021

The purpose of this study was to analyze the trends and characteristics of 'stress urinary incontinence' research through word frequency analysis, and their relationships were modeled using word embedding. Abstract data of 9,868 papers containing abstracts in PubMed's MEDLINE were extracted using a Python program. Then, through frequency analysis, 10 keywords were selected according to the high frequency. The similarity of words related to keywords was analyzed by Word2Vec machine learning algorithm. The locations and distances of words were visualized using the t-SNE technique, and the groups were classified and analyzed. The number of studies related to stress urinary incontinence has increased rapidly since the 1980s. The keywords used most frequently in the abstract of the paper were 'woman', 'urethra', and 'surgery'. Through Word2Vec modeling, words such as 'female', 'urge', and 'symptom' were among the words that showed the highest relevance to the keywords in the study on stress urinary incontinence. In addition, through the t-SNE technique, keywords and related words could be classified into three groups focusing on symptoms, anatomical characteristics, and surgical interventions of stress urinary incontinence. This study is the first to examine trends in stress urinary incontinence-related studies using the keyword frequency analysis and word embedding of the abstract. The results of this study can be used as a basis for future researchers to select the subject and direction of the research field related to stress urinary incontinence.

• Journal of Korean Neurosurgical Society
• /
• v.61 no.2
• /
• pp.277-281
• /
• 2018

Objective : Craniovertebral junctional anomalies constitute a technical challenge. Surgical opening of atlantoaxial joint region is a complex procedure especially in patients with nuchal deformity like basilar invagination. This region has actually very complicated anatomical and functional characteristics, including multiple joints providing extension, flexion, and wide rotation. In fact, it is also a bottleneck region where bones, neural structures, and blood vessels are located. Stabilization surgery regarding this region should consider the fact that the area exposes excessive and life-long stress due to complex movements and human posture. Therefore, all options should be considered for surgical stabilization, and they could be interchanged during the surgery, if required. Methods : A 53-year-old male patient applied to outpatients' clinic with complaints of head and neck pain persisting for a long time. Physical examination was normal except increased deep tendon reflexes. The patient was on long-term corticosteroid due to an allergic disease. Magnetic resonance imaging and computed tomography findings indicated basilar invagination and atlantoaxial dislocation.The patient underwent C0-C3-C4 (lateral mass) and additional C0-C2 (translaminar) stabilization surgery. Results : In routine practice, the sites where rods are bound to occipital plates were placed as paramedian. Instead, we inserted lateral mass screw to the sites where occipital screws were inserted on the occipital plate, thereby creating a site where extra rod could be bound.When C2 translaminar screw is inserted, screw caps remain on the median plane, which makes them difficult to bind to contralateral system. These bind directly to occipital plate without any connection from this region to the contralateral system.Advantages of this technique include easy insertion of C2 translaminar screws, presence of increased screw sizes, and exclusion of pullout forces onto the screw from neck movements. Another advantage of the technique is the median placement of the rod; i.e., thick part of the occipital bone is in alignment with axial loading. Conclusion : We believe that this technique, which could be easily performed as adjuvant to classical stabilization surgery with no need for special screw and rod, may improve distraction force in patients with low bone density.

• Clinical and Experimental Pediatrics
• /
• v.57 no.7
• /
• pp.323-328
• /
• 2014

Purpose: Adenoid hypertrophy is a physical alteration that may affect speech, and a speech disorder can have other negative effects on a child's life. Airway obstruction leads to constricted oral breathing and causes postural alterations of several oro-facial structures, including the mouth, tongue, and hyoid bone. The postural modifications may affect several aspects of speech production. Methods: In this study, we compared articulation errors in 19 children with adenoid hypertrophy (subject group) to those of 33 children with functional articulation disorders independent of anatomical problems (control group). Results: The mean age of the subject group was significantly higher (P=0.016). Substitution was more frequent in the subject group (P=0.003; odds ratio [OR], 1.80; 95% confidence interval [CI], 1.23- 2.62), while omission was less frequent (P<0.001; OR, 0.43; 95% CI, 0.27-0.67). Articulation errors were significantly less frequent in the palatal affricative in the subject group (P=0.047; OR, 0.25; 95% CI, 0.07-0.92). The number of articulation errors in other consonants was not different between the two groups. Nasalization and aspiration were significantly more frequent in the subject group (P=0.007 and 0.014; OR, 14.77 and 0.014; 95% CI, [1.62-135.04] and NA, respectively). Otherwise, there were no differences between the two groups. Conclusion: We identified the characteristics of articulation errors in children with adenoid hypertrophy, but our data did not show the relationship between adenoid hypertrophy and oral motor function that has been observed in previous studies. The association between adenoid hypertrophy and oral motor function remains doubtful.