• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.353-353
• /
• 2011

Titanium dioxide is a suitable material for industrial use at present and in the future because titanium dioxide has efficient photoactivity, good stability and low cost [1]. Among the three phases (anatase, rutile, brookite) of titanium dioxide, the anatase form is particularly photocatalytically active under ultraviolet (UV) light. In fabrication of photocatalytic devices based on catalytic nanodiodes [2], it is challenging to obtain a photocatalytically active TiO2 thin film that can be prepared at low temperature (< 200$^{\circ}C$). Here, we present the synthesis of a titanium dioxide film using TiO2 nanoparticles and sol-gel methods. Titanium tetra-isopropoxide was used as the precursor and alcohol as the solvent. Titanium dioxide thin films were made using spin coating. The change of atomic structure was monitored after heating the thin film at 200$^{\circ}C$ and at 350$^{\circ}C$. The prepared samples have been characterized by X-ray diffraction (XRD), scanning electron microcopy, X-ray photoelectron spectroscopy, transmission electron microscopy, ultraviolet-visible spectroscopy (UV-vis), and ellipsometry. XRD spectra show an anatase phase at low temperature, 200$^{\circ}C$. UV-vis confirms the anatase phase band gap energy (3.2 eV) when using the photocatalyst. TEM images reveal crystallization of the titanium dioxide at 200$^{\circ}C$. We will discuss the switching behavior of the Pt /sol-gel TiO2 /Pt layers that can be a new type of resistive random-access memory.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 춘계학술논문 발표대회 제6권1호
• /
• pp.147-153
• /
• 2006

Photocatalyst reaction has limit of its usage because application range mostly centered on atmosphere purification area. Thus, it is true that an alternative plans are necessary to increase usage of $TiO_2$ as photocatalyst material. (1) The result of flow felt according to $TiO_2$ replacement rate has shown that both of anatase type and rutile type over 12% deviated from desired flow, $110{\pm}5mm$. Consequently, the range below 9% will be suitable when the anatase type $TiO_2$ if used for functional additives if workability is considered. (2) After compressive strength test, replacement rate 6-9% is estimated as suitable range if $TiO_2$ is used as compressive strength material. Rutile type and anatase type are suitable for in early-age strength and long-age strength respectively. (3) It was revealed that bending strength was dramatically decreased when replacement rate was increased. The main reason were the increase of $TiO_2$ doesn't influence hydration reaction and the decrease of bending strength. (4) The result from the water purification properties test using ion-chromatograhpy has shown that the condition with anatase type $TiO_2$ was normally better than rutile type on the same replacement rate.

• 한국세라믹학회지
• /
• 제49권5호
• /
• pp.469-474
• /
• 2012

The crystallinity and phase ratio of anatase to rutile in $TiO_2$ were estimated by x-ray diffraction (XRD) and x-ray absorption spectroscopy (XAS). Traditionally, the structural characterization of $TiO_2$ powders has been carried out by XRD techniques, which are comparatively easy in use and analysis. However, materials with amorphous phase, nano-sized or nano-structured crystallinities cannot be fully characterized by XRD because XRD analysis has a limit for abnormal contributions of the nano-crystal such as the surface contribution. From the comparison with the experimental and calculated Ti K-edge XAS spectra, we found the possibility of efficient estimation in the crystalinites and the phase ratio of anatase to rutile for nano-sized $TiO_2$ mixture.

• 한국세라믹학회지
• /
• 제50권2호
• /
• pp.116-121
• /
• 2013

Zinc crystal glaze has its limits in practical use of commercial glaze due to the controlling crystal. In order to overcome this limit, and to heighten the practical usage, this study is aimed to develop artificially controlling willemite ($Zn_2SiO_4$) zinc crystalline glaze. For this purpose, it has experimented with the effect of anatase form and rutile form using $TiO_2$ known as nucleating agent. In zinc glaze, adding $TiO_2$ resulted with anatase form becoming more effective at nucleating formation and growth of willemite than the rutile form. Furthermore, it turned out that using the $TiO_2$ - anatase form, with synthetic seeds (zinc silicate), the numbers and positions of crystals can be controlled artificially.

• Bulletin of the Korean Chemical Society
• /
• 제23권3호
• /
• pp.477-480
• /
• 2002

A new microporous TiO2-pillared layered titanate has been successfully prepared by hybridizing the exfoliated titanate with the anatase TiO2 nano-sol. According to the X-ray diffraction analysis and N2 adsorption-desorption isotherms, the TiO2-pillared layered titanate showed a pillar height of ~2 nm with a high surface area of ~460 m2/g and a pore size of ~0.95 nm, indicating that a microporous pillar structure is formed. Its photocatalytic activity was evaluated by measuring the photodegradation rate of 4-chlorophenol during irradiation of catalyst suspensions in an aqueous solution. An enhancement in activity of ca. 170% was obtained for TiO2-pillared layered titanate compared to that of the pristine compound such as layered cesium titanate.

• 열처리공학회지
• /
• 제7권1호
• /
• pp.11-16
• /
• 1994

Anatase $TiO_2$ particles prepared by experiment were used to study the change of crystal structure by calcination temperature. The results were as follows. Crystallite size of anatase $TiO_2$ particles increased with calcination temperature. The rate of increasing the crystallite size of anatase $TiO_2$ particles was decreased below $700^{\circ}C$ and was markedly increased above $700^{\circ}C$. Unit cell volume of $TiO_2$ was expanded at low temperature and was contracted at high temperature. This result means that the growth of crystallite size was occured in the direction.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 춘계학술발표회 논문집
• /
• pp.257-257
• /
• 2012

Cerium doped anatase titania powders were prepared by sol-gel process, with ammonium (IV) nitrate and Titanium (IV) butoxide as the raw materials. The characteristics of anatase $TiO_2$ and cerium doped $TiO_2$ were investigated by XRD, DTA, FE-SEM and UV/Vis spectroscopy. Research results indicated that XRD data characteristic diffraction peaks of anatase phase and also showed that cerium phase was not observed. Moreover XRD and DTA results imply that the addition of cerium to titania modifies the mechanism of formation of the titania phases.

• Bulletin of the Korean Chemical Society
• /
• 제18권6호
• /
• pp.640-643
• /
• 1997

Pure titanium dioxide $(TiO_2)$ films were prepared by pulsed laser deposition on a single crystal Si(100) substrate. We have investigated the growth of crystalline titanium dioxide films with respect to substrate temperature and ambient oxygen pressure. The structural properties of the films were analyzed by X-ray diffraction. We found that the anatase as well as the rutile phases could be formed from the original rutile phase of the target $TiO_2$. At 0.75 torr of ambient oxygen pressure, the structure of $TiO_2$ film was amorphous at room temperature, anatase between 300 and 600 ℃, a mixture of anatase and rutile between 700 and 800 ℃, and only rutile at 900 ℃ and above. However, at a low ambient oxygen pressure, the rutile phase became dominant; the only rutile phase was obtained at the ambient oxygen pressure of 0.01 torr and the substrate temperature of 800 ℃. Therefore, the film structures were largely influenced by substrate temperature and ambient oxygen pressure.

• 한국결정성장학회지
• /
• 제24권5호
• /
• pp.213-218
• /
• 2014

Anatase $TiO_2$에 각기 다른 텅스텐(W) 함유원료와 제조방법을 적용하여 $WO_3$ 촉매가 첨가된 SCR(selective catalytic reduction)용 분말을 합성하였으며, W 촉매 첨가가 합성분말의 상합성 및 SCR 촉매능에 미치는 영향에 대해 연구하였다. 촉매의 지지체인 $TiO_2$는 침전법으로 anatase 상으로 합성되었으며, anatase에서 고온상인 rutile로의 상전이 온도는 $1200^{\circ}C$였으나, $WO_3$를 10 wt% 첨가할 경우 이 상전이 온도는 $900^{\circ}C$로 낮아졌다. 건식으로 $WO_3$ 분말을 직접 첨가하여 $WO_3(10wt%)/TiO_2$를 제조한 경우 $350^{\circ}C$에서 $NO_X$ 제거 촉매능이 최고점에 이르나 온도증가에 따라 그 효율이 상당히 감소하였다. 암모늄-메타-텅스테이트를 습식으로 첨가하여 제조한 경우, 보다 고온인 $450^{\circ}C$에서 촉매능이 최고점에 이르렀으며 온도에 따른 효율감소 폭도 적었다. 이와 같은 경향은 $WO_3$와 $V_2O_5$를 동시 첨가하여 제조한 $V_2O_5(5wt%)-WO_3(10wt%)/TiO_2$ 촉매에서도 나타났다. 즉, 암모늄-메타-텅스테이트를 습식으로 첨가한 경우, $WO_3$를 직접 첨가한 경우에 비해 넓은 온도범위($300^{\circ}C{\sim}500^{\circ}C$)에 걸쳐 90 %에 이상의 우수한 $NO_X$ 변환효율을 보였다.

• 한국결정성장학회지
• /
• 제23권5호
• /
• pp.241-245
• /
• 2013

입상(대나무)활성탄 상에 나노 $TiO_2$ 결정을 담지 즉 분말코팅 하였다. 이와 같이 $TiO_2$ 담지된 활성탄 복합체의 광촉매 활성도는 자외선 조사를 통한 메틸렌블루 수용액의 분해를 통해 측정하였다. 저온 수열합성법(${\leq}200^{\circ}C$, pH 11)을 통해 광학적 촉매활성도가 높은 $TiO_2$를 활성탄 상에 담지 할 수 있었으며, BET 표면적을 측정하여 계산된 $TiO_2$ 분말의 평균입도는 50 nm 정도였다. 수열처리 과정에서 $TiO_2$가 합성되면서 동시에 활성탄의 표면 공극과 기공 상에 코팅이 이루어졌다. 이러한 수열합성법을 통한 합성은 $TiO_2$의 anatase에서 rutile로의 상전이 시작 온도를 $200^{\circ}C$ 부근으로 낮추는 결과를 가져올 수 있어, 합성온도에 따라 저온에서 순수한 anatase 또는 anatase와 rutile이 혼합된 $TiO_2$ 결정상들을 코팅 시킬 수 있었다.