• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.337-342
• /
• 2011

A roller rig has been widely used in the study about dynamic stability and railway safety. However, the cost for constructing the roller rig and the difficulty in adjusting the design parameters for vehicle systems lead to the development of a small scale simulator which is cheaper than the large scale test systems and easy to control the parameters affecting dynamic characteristics of the railway vehicle. For the operation of the small scale test system called a small scale simulator, it is required to investigate the performance and characteristics of the system. This could be achieved by a comparative study between an analysis and an experiment. This paper presented the analytical model which could be used for verifying of the test results and understanding of the physical behavior of the dynamic system comprising the small scale bogie and the simulator.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권9호
• /
• pp.397-407
• /
• 2002

A new simulator which predicts the quantum effect in NMOSFET structure is developed. Using the self-consistent method by numerical method, this simulator accurately predicts the carrier distribution due to improved calculation precision of potential in the inversion layer. However, previous simulator uses analytical potential distribution or analytic function based fitting parameter Using the developed simulator, threshold voltage increment and gate capacitance reduction due to the quantum effect are analyzed in NMOS. Especially, as oxide thickness and channel doping dependence of quantum effect is analyzed, and the property analysis for the next generation device is carried out.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.291-292
• /
• 2006

• 한국통신학회논문지
• /
• 제11권2호
• /
• pp.108-121
• /
• 1986

音聲과 데이터가 集積된 패킷 通信網의 性能을 豫測하고 시스템 파라메터를 最適化하기 위한 시뮬레이터의 개발에 관하여 記述하였다. 具現된 시뮬레이터는 CCITT의 勸告事項에 따라 運用되는 데이터 터미널이나 host는 물론 패킷 音聲터미널도 연결가능한 音聲 및 데이터集積通信網의 性能을 여러 상황에서 豫測할 수 있다. 시뮬레이션 技法으로는 지금까지 알려진 세가지 discrete event 시뮬레이션 技法 중 process interaction 方法이 사용되었는데 이 方法을 사용하면 실제 시스템과 가장 비슷한 시뮬레이터를 具現할 수 있다. 시뮬레이터는 약 4,000line의 GPSS 시뮬레이션 언어와 PL/I으로 具現되었다. 시뮬레이터의 컴퓨터 run time을 줄이기 위하여 GPSS의 LINK block을 사용함으로써 條件的 event의 數를 줄이는 方法을 사용하였다. 구현된 시뮬레이터를 사용하여 7-node 通信網의 性能을 豫測하였다. 또 개발된 시뮬레이터의 妥當性을 檢證하기 위하여 간단한 音聲과 데이터 multiplexer를 시뮬레이션 모델로 구성한 뒤 그 시뮬레이션 결과를 解釋的 방법에 依한 결과와 比較하였다.

• Journal of Electrical Engineering and Technology
• /
• 제12권6호
• /
• pp.2419-2425
• /
• 2017

In this paper, a system for the precise detection of arcs is proposed for a rigid catenary using a spectrometer. For this purpose, a miniature rigid catenary contact-loss simulator was used. Experiments were performed by varying the amplitude of the excitation frequency with which a real arc can occur using a simulator in the range of 5 to 15 mm. The range of the radiated wavelength of the copper, which is a material in the rigid catenary, and the irradiance were measured using a spectrometer according to the generated contact loss. In addition, the amount was monitored over time and its characteristics were analyzed. The voltage and current of the load were analyzed when the arc occurred due to contact loss. The analytical results will be applied to detect rigid catenary arcs and used as a monitoring system for real vehicles developed in the future. This will prevent abrasion and disconnection in rigid catenary systems.

• 대한조선학회논문집
• /
• 제47권6호
• /
• pp.776-781
• /
• 2010

In the ship-handling simulator, it is important for a ship manoeuvring model to represent the dynamic characteristic of a ship and to be simple for reducing calculation time. Especially, even if principal dimensions of a ship are given in initial design stage, or manoeuvring test data are only given by model or real ship's trials, simulations are often needed to check the manoeuvrability of a ship. In this paper, a simple manoeuvring model based on turning test data of a ship is mathematically developed. And the simulation results are verified by comparing with turning test results of a real ship.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.807-813
• /
• 2006

The objective of this study is to develop a rule-based fault detection algorithm and an experimental verification using an artificial air handling unit. To develop an analytical algorithm which precisely detects a tendency of faulty component, energy equations at each control volume of AHU were applied. An experimental verification was conducted on the HVAC simulator. The rule based FDD algorithm isolated a faulted sensor from HVAC components in summer and winter conditions.

• Journal of Communications and Networks
• /
• 제8권1호
• /
• pp.49-58
• /
• 2006

One of the first decisions that a radio network designer must take is the location of base stations and the distance between them in order to give the best coverage to a region and, possibly, to reduce deployment costs. In this paper, the authors give an insight to this matter by presenting a possible solution to a real problem: Planning the base stations layout for a universal mobile telecommunications system (UMTS) in the city of Barcelona. At the basis of this problem, there is the interdependence between coverage and capacity in a wideband-code division multiple access (W-CDMA) system, which is a new element in the planning of BS layout for mobile communications. This aspect has been first treated with an analytical study of the cell coverage range for a specific environment and service. The achieved results have been checked with the help of snapshot simulations together with a geographical information system (GIS) tool incorporated in the simulator that allows to perform analysis and to visualize results in a useful way. By using the simulator, it is also possible to study a more complex environment, that of a set of base stations providing multiple services to a large number of users.

• Spatial Information Research
• /
• 제5권1호
• /
• pp.99-113
• /
• 1997

본 연구는 CA 시뮬레이터가 GIS의 분석 기관으로 결합되어 있는 통합 CA-GIS를 이용하여 기존의 GIS연산들을 구현하고 연산들의 성능을 향상시키며, 현재의 GIS에서는 구현이 불가능하거나 어려웠던 연산들을 새로이 개발하는데 그 목적을 두었다. 대다수의 국지 및 근린 GIS연산들이 통합 CA-GIS에 의해 성공적으로 구현될 수 있었으며, 이 중 반복적인 프로세싱을 요구하는 일부 연산들은 CA가 갖고 있는 우수성에 기인해 원래 연산보다 더 나은 성능을 보여주었다. 또한 새로운 유형의 연산들(다양한 형태의 공간 필토, 시계열 필터, 확산 연산자 등)이 시험 제작 되었고 다차원 공간연산, 시공연산 그리고 동적 연산들이 이 통합시스템을 사용하여 구현될 수 있음이 예시되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1081-1082
• /
• 2011

In order to predict the accuracy of the linear motion machine tools, the force characteristics such as the detent force, the attraction force and the moment are estimated by analytical method or FEM. In this paper, we proposed the analytical calculation process for the force characteristics of a linear motor. The analytical results are good agreement with FEM one. They could be used for the precision prediction simulator with the information of linear bearings, encoders, etc.