• Journal of the Korean Society for Railway
• /
• v.16 no.1
• /
• pp.7-13
• /
• 2013

A scaled version of a roller rig is developed to demonstrate the dynamic characteristics of a railway vehicle for academic purposes. This rig is designed based on Jaschinski's similarity law. It is scaled to 1/10 of actual size and allows 9-DOF motion to examine the up and down vibration of a train set. The test rig consists of three sub-hardware components: (i) a driving roller mechanism with a three-phase AC motor and an inverter, (ii) a bogie structure with first and second suspensions, and (iii) the vehicle body. The motor of the rig is capable of 3,600rpm, allowing the test to simulate a vehicle up to a maximum speed of 400Km/hr. Because bearings and joints are properly connected to the sub-structures, various motion analyses, such as a lateral, pitching, and yawing motion, are allowed. The slip motion between the rail and the wheel set is also monitored by several sensors mounted in the rig. After the construction of the hardware, an experiment is conducted to obtain the natural frequencies of the dynamic behavior of the specimen. First, the test rig is run and data are collected from six sets of accelerometers. Then, a numerical analysis of the model based on the ADAMS program is derived. Finally, the measurement data of the first three fundamental frequencies are compared to the analytical result and the validation of the test rig is conducted. The results show that the developed roller rig provides good accuracy in simulating the dynamic behavior of the vehicle motion. Although the roller rig designed in this paper is intended for academia, it can easily be implemented as part of a dynamic experiment of a bogie and a vehicle body for a high-speed train as part of the research efforts in this area.

• Journal of Korean Medicine Rehabilitation
• /
• v.24 no.2
• /
• pp.107-114
• /
• 2014

Objectives The purpose of this study is analyzing internal research trends of oriental obesity pattern identification in korean literature based on obesity pattern identification questionnaires, development and application of Pattern Identification System to help solve problems of future researches. Methods 6 Korean databases were searched for articles of oriental obesity pattern identification, irrespective of publication year and 13 studies were reviewed. An analytical method such as descriptive statistics and an actual number and percentage was used. Results We collected 13 studies. 4 studies were published in 2012 and 2008, the highest number of studies. 7 Clinical studies were the major research method. The Studies were classified according to the characteristics and design. 5 studies were about research of analysis and improvement of oriental obesity pattern identification questionnaire, the most number of studies. 4 studies were about research of observational studies in clinical on obesity pattern identification. 3 studies were about research of intervention studies in clinical on obesity pattern identification and 1 study was about clinical practice recommendation. Conclusions Establishment of obesity pattern identification system and its clinical application could lead to standardizing obesity pattern identification and clinical practice guideline. Applied on other diseases, obesity pattern identification system could also lead to improving treatment rate, contributing to the development of clinical practice guidelines and academic field of research.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.6
• /
• pp.439-448
• /
• 2016

Extended end-plate connections(EEPC) are a type of connection applied in Pre-Engineered Building structures comprising beam-column connections of steel structures or tapered members. Extended end-plate connections(EEPC) show different behavioral characteristics owing to the influence of plate thickness, gauge distance of high strength bolt, diameter of high strength bolt frame, and the number of high strength bolts. In the USA and Europe, extended end-plate connections(EEPC) are applied in beam-column connections of steel structures in various forms; however, these are not widely applied in structures in Korea.This can be attributed to the fact that the proposal of design strength types for extended end-plate connections(EEPC), proposal of connection specifications, evaluation of seismic performance, and are not being performed appropriately. Therefore, the purpose of this study is to provide basic data for the domestic application of Unstiffened extended endplate connections. To realize this, nonlinear finite element analysis was conducted on a 12-mm thick Unstiffened extended endplate connections.

• Culinary science and hospitality research
• /
• v.15 no.3
• /
• pp.356-372
• /
• 2009

The purpose of this study is to study academic tendency in the researches on the service quality of Korean restaurants by analyzing the studies related to the service quality of Korean restaurants. As a result of this study, the studies related to the service quality of Korean restaurants, included in 7 academic journals selected, are totally 26 articles. Among them, there are 14 researches targeting medium-large size Korean restaurants with more than 100 seats. In the methodological aspect, the scales, which were used most frequently in measuring the service quality of Korean restaurants, were indicated to be SERVQUAL in Parasuraman et al.(1988), DINESERV in Stevens et al.(1995) and Brady & Cronin(2001)'s scale. Also, as a result of examining the tendency of researches related to the service quality in Korean restaurants in the contextual aspect, the interaction quality between employees and customers out of customers' perceived service quality was surveyed to have greater influence upon customers' behavioral reaction than the physical quality or technical quality. Consequently, in order to conduct an institutional research through examining the service quality in Korean restaurants, understanding the customers' perceived service quality needs to be implemented preferentially with a systematically verified scale. Moreover, such researches on the service quality of Korean restaurants appear to focus on specific subjects. Thus, in order to escape from this tendency, it is necessary to explore creative research subjects and design diversely and scientifically analytical methods.

• Journal of the Korea Concrete Institute
• /
• v.19 no.2
• /
• pp.241-250
• /
• 2007

In case of retrofitting a concrete structure subjected to blast load by using retrofit materials such as FRP (fiber-reinforced polymer), appropriate ductility as well as raising stiffness must be obtained. But the previous approximate and simplified models, which have been generally used in the design and analysis of structures subjected to blast load, cannot accurately consider effects on retrofit materials. Problems on the accuracy and reliability of analysis results have also been pointed out. In addition, as the response of concrete and reinforcement on dynamic load is different from that on static load, it is not appropriate to use material properties defined in the previous static or quasi-static conditions to in calculating the response on the blast load. In this study, therefore, an accurate HFPB (high fidelity physics based) finite element analysis technique, which includes material models considering strength increase, and strain rate effect on blast load with very fast loading velocity, has been suggested using LS-DYNA, an explicit analysis program. Through the suggested analysis technique, the behavior on the blast load of retrofitted concrete walls using CFRP (carbon fiber-reinforced polymer) and GFRP (glass fiber-reinforced polymer) have been analyzed, and the retrofit capacity analysis has also been carried out by comparing with the analysis results of a wall without retrofit. As a result of the analysis, the retrofit capacity showing an approximate $26{\sim}28%$ reduction of maximum deflection, according to the retrofit, was confirmed, and it is judged ate suggested analysis technique can be effectively applicable in evaluating effectiveness of retrofit materials and techniques.

• Journal of IKEEE
• /
• v.1 no.1 s.1
• /
• pp.31-46
• /
• 1997

In this paper, a parallel Optimal Best-First search Branch-and-Bound(B&B) algorithm(pobs) is designed and evaluated for MIN-based multiprocessor systems. The proposed algorithm decomposes a problem into G subproblems, where each subproblem is processed on a group of P processors. Each processor group uses tile sub-Global Best-First search technique to find a local solution. The local solutions are broadcasted through the network to compute the global solution. This broadcast provides not only the comparison of G local solutions but also the load balancing among the processor groups. A performance analysis is then conducted to estimate the speed-up of the proposed parallel B&B algorithm. The analytical model is developed based on the probabilistic properties of the B&B algorithm. It considers both the computation time and communication overheads to evaluate the realistic performance of the algorithm under the parallel processing environment. In order to validate the proposed evaluation model, the simulation of the parallel B&B algorithm on a MIN-based system is carried out at the same time. The results from both analysis and simulation match closely. It is also shown that the proposed Optimal Best-First search B&B algorithm performs better than other reported schemes with its various advantageous features such as: less subproblem evaluations, prefer load balancing, and limited scope of remote communication.

• Journal of the Korean Society of Costume
• /
• v.58 no.7
• /
• pp.76-91
• /
• 2008

The purpose of this study is to prescribe formative perspectives as a framework where the aesthetic taste and demands of a certain period are embodied and to develop new analytical tools to examine the beauty of dress in terms of form. First, the theoretical tools selected for this study are Heinrich Wolfflin's formative perspective theory derived from art and Marilyn R. DeLong's framework for visual analysis of dress. Second, several issues that limited the development of a new framework for analyzing the form of dress were identified and addressed. Third, the selected aspects of dress form to be analyzed are specified. They are: silhouette, inner form, structure form, materials and patterns based upon the relationship between the body, dress and space in order to develop new formative perspectives. Based upon these theories a new framework for analyzing dress aesthetics in terms of form is developed. This reconstructed framework consists of three sets of antagonistic representational styles: closed form/open form, linear form/painterly form and multiplicity/unity. Closed form/open form represented in dress can be classified by the clear or obscure silhouette shown not only in the relationship between the dress and space around the dress, but also from changeability or invariability of dress in relation to the body. The material, pattern and various design elements are used as the central criteria to determine the linear/painterly characteristics in dress representations. Finally, the multiplicity/unity can be found in the relationship between the whole and the parts. Multiplicity is represented in dress when the parts have a visual priority over the whole, whereas unity is represented when a dress as a whole has visual priority over the parts. A dress represented with closed form, linear characteristic and multiplicity is perceived as a clear form. In contrast, a dress with open form, painterly characteristic and unity is understood to be an obscure form. It can be said that this study is the first attempt to establish the formative perspectives for analyzing the form of dress in various periods, cultures and races for the future studies.

• The Korean Journal of Food And Nutrition
• /
• v.27 no.4
• /
• pp.539-550
• /
• 2014

The purpose of this study was to determine the optimal mixing ratios of three different ingredients of Polygonum multiflorum Radix powder, butter, and sugar for the development of recipe for cookies with Polygonum multiflorum Radix powder. Response surface methodology based on a five level and three variables by central composite design was employed to obtain the best possible combination for the ratios of Polygonum multiflorum Radix powder ($X_1$), butter ($X_2$), and sugar ($X_3$). The analytical results of the physical and mechanical properties for each sample including color L (P<0.01), color a (P<0.01), color b (P<0.01), spread ratio (P<0.001), and hardness (P<0.001) showed significant differences. The sensory measurements were significantly different in color (P<0.05), appearance (P<0.05), texture (P<0.001), flavor (P<0.01), taste (P<0.01), and overall quality (P<0.001). The optimal compositional ratios were determined to be 4.00 g for the Polygonum multiflorum Radix powder, 75.42 g for the butter, and 45.67 g for the sugar.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.4
• /
• pp.41-49
• /
• 2010

This paper proposes a new high speed SHA-1 architecture using multiple unfolding and pre-computation techniques. We unfolds iterative hash operations to 2 continuos hash stage and reschedules computation timing. Then, the part of critical path is computed at the previous hash operation round and the rest is performed in the present round. These techniques reduce 3 additions to 2 additions on the critical path. It makes the maximum clock frequency of 118 MHz which provides throughput rate of 5.9 Gbps. The proposed architecture shows 26% higher throughput with a 32% smaller hardware size compared to other counterparts. This paper also introduces a analytical model of multiple SHA-1 architecture at the system level that maps a large input data on SHA-1 block in parallel. The model gives us the required number of SHA-1 blocks for a large multimedia data processing that it helps to make decision hardware configuration. The hs fospeed SHA-1 is useful to generate a condensed message and may strengthen the security of mobile communication and internet service.

• Journal of the Korean Magnetics Society
• /
• v.25 no.2
• /
• pp.52-57
• /
• 2015

The focal spot of electron beam depending on the anode angle in the structure and major parts of the X-ray tube was investigated by the OPERA-3D/SCALAR simulation program. The simulation worked on four spaces with with two spaces, including anode and cathode of X-ray tube, by applying the finite element method analysis. The analytical model and dimension for the emission orbit of thermal electrons made from one filament of the focused X-ray cathode is affected to the penumbra of detector for the X-ray depending on any real focal spot size. The model shape of focusing cap and focusing tube with an anode target angle and a cathode filament is analyzed by the current density distribution of thermal electrons. The focusing width of thermal electrons for the X-ray tube depended on the anode angle (${\theta}$). The focusing value of electron beams at a region of anode angle having $10^{\circ}{\sim}17^{\circ}$ maintained to below value of $70{\mu}m$. The minimum focal size of the electron beam was $40{\mu}m$ at an anode angle of $15^{\circ}$. The focused X-ray tube of many variables depended on the thermionic emission of hot electrons from the target trajectory. The focusing tube will contribute to the real design of X-ray for the development of future diagnosis medical device.