• Journal of Korea Water Resources Association
• /
• v.41 no.8
• /
• pp.825-834
• /
• 2008

Riverbank filtration for water supply has been employed for about 150 years in developed countries. In Korea, the feasibility of riverbank filtration has been investigated since 1990's for large river basins, to find a solution to stably meet the ever-increasing demand for water. Recently, some cites in the Nak-dong River Basin have been supplying the water through riverbank filtration. This research studies the feasibility of riverbank filtration in Seoul. Analytic Hierarchy Process (AHP), which selects the most optimal alternative by hierarchically classifying various attributes and then quantifying the importance of each attribute, was applied to candidate locations for the selection of riverbank filtration site. The Kwangnaru district, which has advantages in water quality and close connectivity to the existing water purification facility, was selected as the most optimal site.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.2
• /
• pp.95-103
• /
• 2004

Recently, many troubles about the right of light have been arising ceaselessly as taller and more dense the buildings have been in the urban. The present time, the right of light is not stipulated legally. For solving above problems, there spend so too much lawsuit expenses and time on the damages about construction stopped and delayed, according to subjective decisions instead of scientific and rational solutions. The past studies of the right of light weren't based on the analytic data and depend on the simple view of point. So, those of studies gave trust to people hardly, only were treated as the ways on the decision about construction among non-engineers. Therefore, this paper studies the efficient solution of problems about the right of light through analysis about mass of sunlight according to season and the hour using a simulation technique on the civil construction.

• Water Engineering Research
• /
• v.3 no.1
• /
• pp.57-62
• /
• 2002

This research is intended to integrate long-term operation rules and real time operation policy for conservation & flood control in a reservoir. The familiar Yield model has been modified and used to provide long-term rule curves. The model employs linear programming technique under given physical conditions, i.e., total capacity, dead storage, spillways, outlet capacity and their respective elevations to find required and desired minimum storage fur different demands. To investigate the system behavior resulting from the above-mentioned operating policy, i.e., the rule curves, the simulation model was used. Results of the simulation model show that the results of the optimization model are indeed valid. After confirmation of the above mentioned rule curves by the simulation models, gate operation procedure was merged with the long term operation rules to determine the optimum reservoir operating policy. In the gate operation procedure, operating policy in downstream flood plain, i.e., determination of damaging and non-damaging discharges in flood plain, peak floods, which could be routed by reservoir, are determined. Also outflow hydrograph and variations of water surface levels for two known hydrographs are determined. To examine efficiency of the above-mentioned models and their ability in determining the optimum operation policy, Esteghlal reservoir in Iran was analyzed as a case study. A numerical model fur the solution of two-dimensional dam break problems using fractional step method is developed on unstructured grid. The model is based on second-order Weighted Averaged Flux(WAF) scheme with HLLC approximate Riemann solver. To control the nonphysical oscillations associated with second-order accuracy, TVD scheme with SUPERBEE limiter is used. The developed model is verified by comparing the computational solutions with analytic solutions in idealized test cases. Very good agreements have been achieved in the verifications.

• Journal of Internet Computing and Services
• /
• v.9 no.2
• /
• pp.35-42
• /
• 2008

Mobile IP is a solution to support mobile nodes, however, it does not handle NEtwork MObility (NEMO). The NEMO Basic Support (NBS) protocol ensures session continuity for all the nodes in the mobile network. Since the protocol is based on Mobile IP, it inherits the same fundamental problem such as tunnel convergence, when supporting the multicast for NEMO. In this paper, we propose the multicast route optimization scheme for NEMO environment. We assume that the Mobile Router (MR) has a multicast function and the Nested Mobile Router Information (NeMRI) table. The NeMRI is used to record o list of the CoAs of all the MRs located below it. And it covers whether MRs desire multicast services. Any Route Optimization (RO) scheme can be employed here for pinball routing. Therefore, we achieve optimal routes for multicasting based on the given architecture. We also propose cost analytic models to evaluate the performance of our scheme. We observe significantly better multicast cost in NEMO compared with other techniques such as Bi-directional Tunneling, Remote Subscription, and Mobile Multicast based on the NBS protocol.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.9A
• /
• pp.758-766
• /
• 2011

Cooperative communications are adopted as a promising solution to achieve high data rate over large areas in the future 40 wireless system and the relay station (RS) is the key concept in cooperative communications. However, most existing works in this area focus only on optimal RS selections. In addition, there are only few works consider another crucial issue: how many relay stations we need to place. Only when the number of relay stations is defined, the relay station selection can be performed well. In this paper we derive a formula which describes the impact of varying number of RS on end-to-end link throughput assuming a clustering scheme which is based on Voronoi tessellation. In addition to mathematical analysis on the feasibility of the formula, we also examine its performance through a set of simulations under the Erceg path loss model. Simulation results verify that the link throughput gain of our proposed scheme is promising.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.31-34
• /
• 2002

HgTe quantum dots were synthesized in aqueous solution at room temperature by colloidal method. The synthesized materials were identified to be zincblende cubic structured HgTe quantum dots by X-ray diffraction and transmission electron microscopy image revealed that these quantum dots are agglomerate of a individual particle. The colloidally prepared HgTe quantum dots have the sphere-like shape with a diameter of approximately 4 nm. The optical properties of the HgTe quantum dots were investigated with photoluminescence(PL). The PL appears in the near-infrared region, which represent a dramatic shift from bulk HgTe behavior. The analytic results revealed that HgTe quantum dots have the broad size distribution, as PL emission spectrum covers the spectral region from 900 to 1400 nm. In this study, the factors affecting PL of HgTe quantum dots and particle size distributiont are described.會Ā᐀䁇?⨀젲岒Ā㰀會Ā㰀顇?⨀끩Ā㈀會Ā㈀?⨀䡪ఀĀ᐀會Ā᐀䡈?⨀Ā᐀會Ā᐀ꁈ?⨀硫ᜀĀ저會Ā저?⨀샟ගऀĀ저會Ā저偉?⨀栰岒ఀĀ저會Ā저ꡉ?⨀1岒Ā저會Ā저J?⨀惝ග؀Ā؀會Ā؀塊?⨀ග嘀Ā切會Ā切끊?⨀⣟ගĀ搀會Ā搀ࡋ?⨀큭킢Ā저會Ā저恋?⨀桮킢Ā저會Ā저롋?⨀⣅沥ࠀĀࠀ會Āࠀ၌?⨀샅沥Ā저會Ā저桌?⨀壆沥ሀĀ저會Ā저쁌?⨀o킢瀀ꀏ會Āᡍ?⨀棤좗ĀĀĀ會ĀĀ灍?⨀å좗ĀĀĀ會ĀĀ졍?⨀飥좗ĀĀĀ會ĀĀ⁎?⨀?ꆟᤀ

• Journal of Korea Water Resources Association
• /
• v.30 no.2
• /
• pp.143-154
• /
• 1997

A numerical model for solving advection-diffusion equation is presented by splitoperator method combining the Holly-Preissmann scheme with a fifth-degree interpolating polynomial for advection operator and the explicit scheme porposed by Hobson et al. for diffusion operator. To examine the developed model, the obtained numerical solutions are compared with both the analytic solution and those from the existing models for the instantaneous source (Gaussian hill) and the continuous source (advanced front) at upstream boundary with constant velocity and diffusivity condition. For the various cases having different Courant and Peclet numbers, it is shown that the present study provides stable solutions even for Courant numbers exceeding one. The result obtained by the present study also agree well with existing analytical solutions for both cases. The proposed explicit scheme somewhat releases the conventional restriction of explicit schemes for determining the time step size and provides satisfactory results for relatively large time step size.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.5
• /
• pp.1356-1364
• /
• 1990

This paper deals with the preliminary design conditions of Stirling Engines based on an adiabatic analysis with regenerator effectiveness. The investigation of thermal regeneration process results that the definition of effectiveness proposed by Urieli et al. is appropriate for the present model. Then, it is applied to the already existing approximate analytic solution for the adiabatic model in order to optimize thermal efficiency as well as work parameter. Results show that thermal efficiency is less sensitive to the variation in design parameters than work. Phase angle for the maximum work is also the most efficient at high values of the effectiveness. Swept volume ratio should be chosen with care. The optimum value of dead volume ratio is at least less than the maximum efficiency condition. The feasible design range in compression ratio lies between the maximum efficiency condition and the structural limit of Stilring Engines, where the higher its value, the better. Changes in the temperature ratio do not alter the design conditions. Working fluids with the specific heat ratio 1.67 are more efficient that those with 1.4.

• Geophysics and Geophysical Exploration
• /
• v.4 no.2
• /
• pp.34-44
• /
• 2001

Forward modeling by construction of synthetic data is usually practiced in a horizontal surface and a few subsurface structures. However, in-situ surveys often take place in such topographic changes that the corrupted field data always make it difficult to interpret the right signals. To examine the propagation characteristic of elastic waves on the irregular surface, a general mesh generation code for finite element method was modified to consider the topography. By implementing this algorithm, the time domain modeling was practiced in some models with surface topography such as mound, channel, etc. The synthetic data obtained by receivers placed on surface also agreed with the analytic solution. The snapshots showing the total wave-field revealed the propagation characteristic of the elastic waves through complex subsurface structures and helped to identify the signals on the time traces. The transmission of Rayleigh waves along the surface, compressive waves, and sheer waves was observed. Moreover, it turned out that the Rayleigh waves behave like a new source at the edge.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.12C
• /
• pp.1181-1185
• /
• 2005

A combining of MIMO signal processing with OFDM is regarded as a promising solution of enhancing the performance of next generation wireless system. Therefore, in this paper, an OFDM-based wireless system employing layered space-time architecture is considered for a high-rate transmission. In the MIMO-OFDM system, we evaluate the PAR performance using the SLM approaches. The investigated SLM scheme for MIMO-OFDM signals selects the transmitted sequence with lowest average PAR over all transmitting antennas and retrieves the side information very accurately at the expense of a slight degradation of the PAR performance. The low probability of false side information can improve the overall detection performance of the MIMO-OFDM system with erroneous side information compared to the ordinary SLM approache, respectively. Also, we provide closed form of the average BER performance in MIMO-OFDM system using analytic approach.