• 한국항공우주학회지
• /
• 제35권1호
• /
• pp.40-45
• /
• 2007

구조물의 모달 해석 또는 모달 시험은 구조물의 동적 특성을 나타내는 모달 파라미터들을 구하는 과정이다. 모달 파라미터에는 고유 진동수, 감쇠율, 진동 모드의 세 가지 값들이 있다. 본 연구에서는 시스템의 개발과정에서 당연히 수행되는 모달 해석의 결과인 모달 파라미터를 활용하여 시스템 방정식을 구하는 방법에 대한 연구를 수행하였다. 상태 방정식의 고유치와 고유 벡터의 상관관계로부터 물리적 시스템 행렬인 질량, 감쇠, 강성 행렬을 각각 구하는 방법을 개발하였다. 간단한 질량-스프링-댐퍼 시스템과 외팔보에 대한 수치 예제를 통하여 개발된 방법의 유용성과 정확도를 검증하였다

• 반도체디스플레이기술학회지
• /
• 제13권3호
• /
• pp.7-11
• /
• 2014

The experimental analysis presented aims at the selection of the most optimal machining parameter combination for wire electrical discharge machining (WEDM) of STD11. Based on the Taguchi experimental design ($L_{27}$ orthogonal array) method, a series of experiments were performed by considering time-on, voltage, time-off, wire speed, and flow rate as input parameters. The surface roughness was considered responses. Based on the signal-to-noise (S/N) ratio, the influence of the input parameters on the responses was determined. The optimal machining parameters setting for the minimum surface roughness was found using Taguchi methodology. In order to investigate the effects of process parameters on the surface machined by WEDM, Several experiments are conducted to consider effects of time-on, voltage, time-off, wire speed and flow rate on the surface roughness. Analysis of variance (ANOVA) as well as regression analysis are performed on experimental data. The best results of surface roughness were obtained at higher voltage, lower wire speed, and lower time-on.

• 대한조선학회논문집
• /
• 제47권2호
• /
• pp.242-247
• /
• 2010

To consider effects of essential parameters of water impact pressure on dynamic structural responses of bow bottom structures, a parametric study for a ship bottom panel is carried out. The idealized pressure time history models were assumed by triangular and rectangular shapes in time domain. The main loading parameters are duration time and peak pressure value maintaining the same impulse value. The structural models for local bottom stiffened panels of a container ship are analysed. The natural frequency analysis and transient dynamic response analysis are performed using MSC/NASTRAN. Added mass effects of contacting water are considered and the pressure distributions are assumed to be uniform in the whole water contacting surface. The effects of loading parameters on the structural responses, especially maximum displacements, are considered. Besides the peak pressure value, effects of duration time correlated with natural frequencies are thought to be the important parameters.

• Advances in materials Research
• /
• 제5권2호
• /
• pp.67-80
• /
• 2016

The objective of the present work is to optimize process parameters namely, cutting speed, feed rate, and depth of cut in milling of AISI 304 stainless steel. In this work, experiments were carried out as per the Taguchi experimental design and an $L_{27}$ orthogonal array was used to study the influence of various combinations of process parameters on surface roughness (Ra) and material removal rate (MRR). As a dynamic approach, the multiple response optimization was carried out using grey relational analysis (GRA) and desirability function analysis (DFA) for simultaneous evaluation. These two methods are considered in optimization, as both are multiple criteria evaluation and not much complicated. The optimum process parameters found to be cutting speed at 63 m/min, feed rate at 600 mm/min, and depth of cut at 0.8 mm. Analysis of variance (ANOVA) was employed to classify the significant parameters affecting the responses. The results indicate that depth of cut is the most significant parameter affecting multiple response characteristics of GFRP composites followed by feed rate and cutting speed. The experimental results for the optimal setting show that there is considerable improvement in the process.

• Journal of Animal Science and Technology
• /
• 제47권1호
• /
• pp.133-140
• /
• 2005

The aim of this study was to divide vocalizations of sows into general(GVs) and estrus-related vocalizations( EVs) and to find out their phonetic characteristics. Ten sows(Landrace) were recorded using digital video recorders twice daily(06: 00 - 08 : 00h and 17: 00 - 19 : 00h) during the anestrus and estrus periods. The GVs and EVs were divided based on the shapes of spectrum and spectrogram. The GVs and EVs were identified as 5 and 3 types, respectively. Pitch, formant I, formant 2, and formant 3 between GVs and EVs were not significantly different(P> 0.05), whereas intensity(P < 0.001), duration(P < 0.05), and formant 4(P < 0.01) were significantly different. Three parameter groups(Group I : Formant vector alone, Group II: Formant veetor+ parameters from time signal, Group III: Formant vector+parameters from time signal-parameters eliminated by stepwise discriminant analysis backward) were compared by discriminant function analysis. The classification system adopted in the Group II represented the higher discrimination rate than those in other groups(Group I : 76.1 0/0, Group II : 88.1 0/0, Group Ill: 87.3 %). These results suggest that EVs are present and intensity, formant 2, and formant 4 are available parameters for discrimination of EVs in sows.

• Journal of Welding and Joining
• /
• 제25권4호
• /
• pp.49-57
• /
• 2007

The optimization of the cladding parameters was studied to maximize the deposition efficiency in the laser cladding using a low power pulsed Nd:YAG laser. STS304 stainless steel plate and Co alloy powder were used as a substrate and powder for cladding, respectively. The six cladding parameters were selected through preliminary experiments and their effects on the deposition efficiency were analyzed statistically. Experiments were designed and carried out using the Taguchi experimental method using a L18 orthogonal array. It was found from the results of analysis of variance(ANOVA) that the powder feed position and powder feed angle had the most significant effects on the deposition efficiency, but the powder feed rate and laser focal position had nearly no effects. The deposition efficiency could be maximized at 0mm of the powder feed position and 50o of the powder feed angle in the experimental range. From this experimental analysis, a new laser cladding head with 20o of the powder feed angle was designed and manufactured. With a new laser cladding head, the highest deposition efficiency of 12.2% could be obtained.

• 대한원격탐사학회지
• /
• 제22권5호
• /
• pp.427-431
• /
• 2006

Forest stand height and volume are important indicators for management purpose as well as for the environmental analysis. Shuttle Radar Topography Mission (SRTM) is backscattered over forest canopy and DSM can be acquired from such scattering characteristic, while National Elevation Dataset (NED) provides bare earth elevation data. The difference between SRTM and NED is estimated as tree height, and it is correlated with forest parameters, it is correlated with forest parameters, including average DBH, Trees per acre, net BF per acre, and total Net MBF. Especially, among them, net Board Foot(BF) per acre is the index that well represents forest volume. The Project site was Douglas-fir dominating plantation area in the western Washington an the northern Oregon in the U.S. This study shows a relationship of high correlation between the forest parameters and the product from SRTM, NED, and ETM+. This research performs multi regression analysis and regression tree algorithm, and can get more improved relationship between several parameters.

• Journal of Information Technology Applications and Management
• /
• 제25권4호
• /
• pp.115-122
• /
• 2018

Software reliability has the greatest impact on computer system reliability and software quality. For this software reliability analysis, In this study, we compare and analyze the trends of the properties affecting the reliability according to the shape parameters of Erlang distribution based on the finite fault NHPP. Software failure time data were used to analyze software failure phenomena, the maximum likelihood estimation method was used for parameter estimation. As a result, it can be seen that the intensity function is effective because it shows a tendency to decrease with time when the shape parameters a = 1 and a = 3. However, the pattern of the mean value function showed an underestimation pattern for the true values when the shape parameters a = 1 and a = 2, but it was found to be more efficient when a = 3 because the error width from the true value was small. Also, in the reliability evaluation of the future mission time, the stable and high trend was shown when the shape parameters a = 1 and a = 3, but on the contrary, when a = 2, the reliability decreased with the failure time. Through this study, the property of finite fault NHPP Erlang model according to the change of shape parameter without existing research case was newly analyzed, and new research information that software developers can use as basic guideline was presented.

• Steel and Composite Structures
• /
• 제42권1호
• /
• pp.59-74
• /
• 2022

This study introduces a general reliability-based, performance-based design framework to design frames regarding their uncertainties and user-defined design goals. The Iterative-R method extracted from the main framework can designate a proper R (i.e., response modification factor) satisfying the design goal regarding target reliability index and pre-defined probability of collapse. The proposed methodology is based on FEMA P-695 and can be used for all systems that FEMA P-695 applies. To exemplify the method, multiple three-dimensional, four-story steel special moment-resisting frames are considered. Closed-form relationships are fitted between frames' responses and the modeling parameters. Those fits are used to construct limit state functions to apply reliability analysis methods for design safety assessment and the selection of proper R. The frameworks' unique feature is to consider arbitrarily defined probability density functions of frames' modeling parameters with an insignificant analysis burden. This characteristic enables the alteration in those parameters' distributions to meet the design goal. Furthermore, with sensitivity analysis, the most impactful parameters are identifiable for possible improvements to meet the design goal. In the studied examples, it is revealed that a proper R for frames with different levels of uncertainties could be significantly different from suggested values in design codes, alarming the importance of considering the stochastic behavior of elements' nonlinear behavior.

• Geomechanics and Engineering
• /
• 제36권6호
• /
• pp.631-640
• /
• 2024

In the traditional slope stability analysis, ignoring the spatial variability of slope soil will lead to inaccurate analysis. In this paper, the K-L series expansion method is adopted to simulate random field of soil strength parameters. Based on Random Limit Equilibrium Method (RLEM), the influence of variation coefficient and fluctuation range on reliability of soil slope supported by micro-pile is investigated. The results show that the fluctuation ranges and the variation coefficients significantly influence the failure probability of soil slope supported by micro-pile. With the increase of fluctuation range of soil strength parameters, the mean safety factor of the slope increases slightly. The failure probability of the soil slope increases with the increase of fluctuation range when the mean safety factor of the slope is greater than 1. The failure probability of the slope increases by nearly 8.5% when the fluctuation range is increased from δ_v=2 m to δ_v =8 m. With the increase of the variation coefficient of soil strength parameters, the mean safety factor of the slope decreases slightly, and the probability of failure of soil slope increases accordingly. The failure probability of the slope increases by nearly 31% when the variation coefficient increases from COV_c=0.2, COV_φ=0.05 to COV_c=0.5, COV_φ=0.2.