• 대한인간공학회지
• /
• 제27권2호
• /
• pp.9-14
• /
• 2008

Coherence can be used to evaluate the functional cortical connections between the motor cortex and muscle. This study is to find coherence between EEG (electroencephalogram) and EMG (electromyogram) evoked by movement of a hand. Seven healthy participants were asked to perform thirty repetitive movement of right hand for ten seconds with rest for ten seconds. Specific feature of EEG components has been extracted by ICA (independent component analysis) and coherence between EEG and EMG was analyzed from data measured EEG in five local areas around central part of head and EMG in flexer carpri radialis muscle during grabbing movement. Coherence between EEG and EMG was successfully obtained at 0.025 confidence limit during hand movement and showed significant difference between rest and movement at 13-18Hz.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.833-841
• /
• 2008

Recently, the upheaval generation in the road which is under service had been reported. Due to the upheaval generation, total 4 lanes were forced to curtail to 3 lanes, and traffic was delayed. In normal situation of cut-slopes in korea, that condition is hard to detect since most cut-slopes contain discontinuous material, that is rock. Common collapses in rock-slopes is wedge failure, plane failure and toppling failure which is all individual mechanism of discontinuous rock mass. In contrast, such upheaval in the road in front of cut-slope can be generated only when circular movement is triggered within the cut-slope. In this sense, rock-slopes barely show any kind of movement in the road locates at the front of them. Numerical analysis is general method in simulation of slope displacement and evaluation of safety. However, numerical analysis programs which are related with rock-slopes are not able to simulate such upheaval movement because that programs are based on discontinuous modeling mechanism. In addition, although numerical analysis programs which are based on FEM/FDM and thus utilize continuous modeling mechanism are able to simulate circular movement and upheaval situation, they have weakness in reflecting discontinuities of rock-slope itself. In this study, detailed in-site investigation and numerical analysis based on in-site condition were performed in order to expect upheaval movement in the road. In this procedure, the FLAC program which uses continuous modeling method was utilized, and new approach reflecting discontinuity developed toward the road with a ubiquitous joint model was tried to derive reliable analysis result.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2008년도 추계학술대회
• /
• pp.145-152
• /
• 2008

Single PPM Quality Innovation Movement is originally developed quality program in Korea for supplier's quality level-up since 1995. The quality target is below the 10ppm(parts per million) in outgoing quality and delivered goods plus field claim. This Single PPM Quality Innovation Movement program was conducted to realize the anticipated results not only due to management result level's increasing, but also the company's confidence and competitiveness. This study attempted to find the mutual influences on the participation of the constituent members, satisfaction of the constituent members and results of the management from Single PPM Quality Innovation Movement. The reliance analysis for the measurement material on the questionnaire was verified by Cronbach's alpha coefficient. Participation of the constituent members, satisfaction of the constituent member and result of the management, the influences upon Single PPM improvement degree level were verified through the structural analysis by using SPSS statistic package. The influence evaluation among the groups was evaluated by the structure equation.

• 한국산업융합학회 논문집
• /
• 제10권2호
• /
• pp.81-88
• /
• 2007

In case of an urban tunnel, the displacement of ground base controls the tunnel design because it is built on shallow and unconsolidated ground many times. There are more insufficiency to describe the ground movement which coincides in the measured result of the situ because the design of an urban tunnel is dependent on the method of numerical analysis used to the existing elastic and elasto-plastic models. We studied about the prediction for the ground movement of a shallow tunnel in unconsolidated ground, mechanism of collapse, and settlement. Also this paper shows comparison with the existing elastic and elasto-plastic model using the unlinear analysis of the strain-softening model. We can model the real ground movement as the increasement of ground surface inclination or occurrence of shear band by using strain-softening model for the result of ground movement of an urban NATM tunnel.

• 통상정보연구
• /
• 제12권1호
• /
• pp.153-175
• /
• 2010

This study conducts an analysis to verify an existence of co-movement among the exchange rates of Yuan-Dollar, Yen-Dollar and Won-Dollar by using time series data. An analysis period is divided into two periods. Therefore the first analysis period is from Dec. 17, 1997 to Jul. 21th. 20, 2005 and the second analysis period is from Jul. 25th, 2005 to Nov. 20th. 2009. This paper uses VAR model and daily data of exchange rates during the period. According to the result of an empirical analysis, yuan-dollar exchange rate has affected by th other variables ; yen-dollar exchange rate. It can be proved by result of an impulse response test and variance decomposition test in the second period. Therefore the won-dollar, yen-dollar, and Yen-dollar exchange rate has been influenced each other and the relationship will be maintained.

• 한국실내디자인학회논문집
• /
• 제20권3호
• /
• pp.198-205
• /
• 2011

The study on how visitors of a museum view exhibition is necessary for providing quality experience to the visitors. Previous studies on the movement of visitors of a museum focused on qualitative analysis after the follow-up survey. Therefore, the purpose of this study is to find out various ways to use quantitative analysis methods on the movement of visitors in the museum. Quantitative analysis of the exhibition place and movement of visitors was conducted using programs to produce quantitative results from the space analysis including VAE, VGA, V-ERAM and ESA. VAE and VGA helped to understand the spatial structure and ESA was helpful to predict how the flow of human traffic would be in the museum. If the programs are used all together, it would be easier to quantitatively predict how the How of human traffic would be in an exhibition room. However, this study is in its infancy, so following studies are necessary based on more data and results of analysis in the future.

• 수산해양교육연구
• /
• 제25권3호
• /
• pp.724-732
• /
• 2013

The purpose of this study is to obtain a basic data on layout of the trawlers' bridge equipment. The task activities of bridge workers involved in the navigation and fishing operation were analyzed by link analysis methods. The results are as follows. It was found that the movement pattern and frequency of bridge workers are different accordance with the bridge work (navigation, casting net, towing net and hauling net). The central workstation of movement of the bridge workers was a radar workstation, a steering workstation and a trawl winch workstation in the bridge work. But the radar did not show up as the center of movement during the hauling net. Workstations related deeply to the central workstations of the movement on the bridge were as below. Radar workstation was related to a GPS plotter, a microphone location for external communication with VHF and MF/HF equipment and a steering in the case of the navigation, the steering, the GPS plotter and the net monitor in the case of the fishing operation. Steering workstation was related deeply to the GPS plotter, the radar in the case of the navigation, a speed controller, the GPS plotter, a fish finder, the net monitor and the microphone location in the case of the fishing operation. Trawl winch workstation showed deep relation with the GPS plotter and the speed control during the fishing operation. Through this study, it was found that Workstations related deeply to the central workstation of the movement of the bridge workers in accordance with the bridge work. The results of this study might be utilized as the basic data on the bridge layout to minimize the fatigue degree due to a physical movement of the bridge workers.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제62권3호
• /
• pp.417-433
• /
• 2023

2022 개정 수학과 교육과정에서 '점의 이동'에 대한 성취기준이 신설되었다. 이에 본 연구는 핀란드 수학 교과서에 제시된 점의 이동에 대한 내용을 공간 방향의 요소인 방향, 이동 거리, 이동 경로를 기준으로 분석하였다. 연구 결과, 핀란드 수학 교과서에서는 방향의 경우, 여러 방향을 언어적 표현, 시각적 표현, 코드적 표현 등으로 다양하게 제시하였다. 이동 거리의 경우, 칸의 수, 길이, 걸음, 순서쌍, 비율 등을 이용하여 거리만큼 이동하거나 이동 거리를 비교하는 활동들을 제시하였다. 이동 경로의 경우, 비조건적 이동과 조건적 이동을 이용하여 지시에 따라 이동하기, 이동 경로 만들기, 이동 경로 찾기, 이동 경로 수정하기 등의 활동들을 제시하였다. 특히 점의 이동은 수와 연산, 변화와 관계 등 여러 수학과 내용 영역뿐만 아니라 프로그래밍 교육과도 연결이 가능하였다. 이러한 연구 결과를 토대로, 점의 이동에 대한 활동을 어떻게 구성할 수 있는지 정보를 제공하여 2022 개정 수학 교과서 개발에 도움이 되길 기대한다.

• 정보처리학회논문지B
• /
• 제15B권5호
• /
• pp.391-396
• /
• 2008

동영상에서 객체의 움직임은 동영상의 내용을 분석하는데 중요한 요소로 작용한다. 따라서 움직임 정보를 이용하여 동영상 내용을 분석하고 검색하기 위한 많은 방법들이 제안되었다. 그러나 대부분의 방법들은 객체 자체의 동작 보다는 움직임의 방향이나 경로를 분석하는 쪽으로 치중되었다. 본 논문에서는 객체의 움직임에 의한 모양 변화를 이용하여 객체의 동작을 표현하고 비교하기 위한 모양 시퀀스 기술자(descriptor)를 제안한다. 객체의 움직임 정보는 입력된 이미지 시퀀스에서 객체 영역을 추출하여 연속된 2차원 모양 정보로 표현되고, 각각의 2차원 모양 정보는 모양 기술자를 이용하여 1차원 모양 특징 값으로 변환된다. 순서에 따라 배열된 모양 기술자들을 시간 축으로 주파수 변환한 후 저주파영역의 계수를 취하여 모양 시퀀스 기술자를 얻게 된다. 실험을 통하여 제안된 방법이 객체의 동작 정보를 매우 효과적으로 표현 및 비교 가능하여 내용 기반 동영상 검색, 동작 인식 등의 인지적 관점의 움직임 분석 응용에 적용 가능함을 보였다.

• Biomaterials and Biomechanics in Bioengineering
• /
• 제3권2호
• /
• pp.115-127
• /
• 2016

Shoulder pain, injury and discomfort are public health and economic issues world-wide. The function of these joints and the stresses developed during their movement is a major concern to the orthopedic surgeon to study precisely the injury mechanisms and thereby analyze the post-operative progress of the injury. Shoulder is one of the most critical joints in the human anatomy with maximum degrees of freedom. It mainly consists of the clavicle, scapula and humerus; the articulations linking them; and the muscles that move them. In order to understand the behavior of individual muscle during abduction arm movement, an attempt has been made to analyze the stresses developed in the shoulder muscles during abduction arm movement during the full range of motion by using the 3D FEM model. 3D scanning (ATOS III scanner) is used for the 3D shoulder joint cad model generation in CATIA V5. Muscles are added and then exported to the ANSYS APDL solver for stress analysis. Sensitivity Analysis is done for stress and strain behavior amongst different shoulder muscles; deltoid, supraspinatus, teres minor, infraspinatus, and subscapularies during adduction arm movement. During the individual deltoid muscle analysis, the von Mises stresses induced in deltoid muscle was maximum (4.2175 MPa) and in group muscle analysis it was (2.4127MPa) compared to other individual four rotor cuff muscles. The study confirmed that deltoid muscle is more sensitive muscle for the abduction arm movement during individual and group muscle analysis. The present work provides in depth information to the researchers and orthopedicians for the better understanding about the shoulder mechanism and the most stressed muscle during the abduction arm movement at different ROM. So during rehabilitation, the orthopedicians should focus on strengthening the deltoid muscles at earliest.