• Journal of Information Processing Systems
• /
• v.7 no.2
• /
• pp.363-384
• /
• 2011

As the complexity of software is increasing, generating an effective test data has become a necessity. This necessity has increased the demand for techniques that can generate test data effectively. This paper proposes a test data generation technique based on adequacy based testing criteria. Adequacy based testing criteria uses the concept of mutation analysis to check the adequacy of test data. In general, mutation analysis is applied after the test data is generated. But, in this work, we propose a technique that applies mutation analysis at the time of test data generation only, rather than applying it after the test data has been generated. This saves significant amount of time (required to generate adequate test cases) as compared to the latter case as the total time in the latter case is the sum of the time to generate test data and the time to apply mutation analysis to the generated test data. We also use genetic algorithms that explore the complete domain of the program to provide near-global optimum solution. In this paper, we first define and explain the proposed technique. Then we validate the proposed technique using ten real time programs. The proposed technique is compared with path testing technique (that use reliability based testing criteria) for these ten programs. The results show that the adequacy based proposed technique is better than the reliability based path testing technique and there is a significant reduce in number of generated test cases and time taken to generate test cases.

• Journal of Environmental Impact Assessment
• /
• v.14 no.6
• /
• pp.403-413
• /
• 2005

The environmental conservation-targeted zoning in urban planning process has been functioned as securing a ecological core in urban green spaces management. Hence, the designation of conservation zones in land use planning is considered as a key task to achieve the sustainability of urban planning. The recently introduced pre-environmental review system for the proposed urban plan, by which the conservative measures for urban ecosystem and landscape are suggested in aspect of environmental impact mitigation, has played an active role in enhancing the environmental performance degraded by wide range of development pressure. This study is aimed at drawing out of objective criteria for designation of environmental conservation zones, which can be applied to urban planning establishment and also to environmental assessment process. To achieve this goal, the study adopted the following methods; pre-study review, analysis of existing official opinion statements released by the Ministry of Environment, contents analysis of related laws, and experts' panel discussions on the finally arranged criteria. The results of this research can be summarized as follows: First, the total criteria of 48 are drown out with categorizing into environment-ecological and socio-cultural sectosr. Second, the environment-ecological part is composed of 33 criteria such as vegetation, animal, geomorphology, watershed, environmental land suitability, and etc. Here, the Degree of Ecological Function, Degree of Environmental Land Suitability, and Vegetation Map are mainly utilized. Third, the 15 socio-cultural criteria relating to the history, social ecology and landscape have such components as forest around relics, Seo-won(school), castle, tomb, landmark, skyline, natural landscape, and etc. Forth, these individual criteria can be applied to designation of each conservation zones among total of 11 conservation areas(or districts).

• Nuclear Engineering and Technology
• /
• v.47 no.3
• /
• pp.340-350
• /
• 2015

This paper proposes strain-based acceptance criteria for assessing plastic instability of the safety class 1 nuclear components made of ferritic steel during level D service loads. The strain-based criteria were proposed with two approaches: (1) a section average approach and (2) a critical location approach. Both approaches were based on the damage initiation point corresponding to the maximum load-carrying capability point instead of the fracture point via tensile tests and finite element analysis (FEA) for the notched specimen under uni-axial tensile loading. The two proposed criteria were reviewed from the viewpoint of design practice and philosophy to select a more appropriate criterion. As a result of the review, it was found that the section average approach is more appropriate than the critical location approach from the viewpoint of design practice and philosophy. Finally, the criterion based on the section average approach was applied to a simplified reactor pressure vessel (RPV) outlet nozzle subject to SSE loads. The application shows that the strain-based acceptance criteria can consider cumulative damages caused by the sequential loads unlike the stress-based acceptance criteria and can reduce the overconservatism of the stress-based acceptance criteria, which often occurs for level D service loads.

• 대한공업교육학회지
• /
• v.30 no.2
• /
• pp.82-103
• /
• 2005

The purpose of this study was to develop and present the accreditation criteria for engineering technology education programs in junior colleges. Research methods used in this study were review of related literature, experts discussion, and Delphi technique. Especially, Delphi technique was the major research method of this study. The Delphi surveys were taken for about seven weeks and three rounds at a higher level of expert participation. Major results of the study were as follows: 1. It proved that thirty six of total forty items had the content validity as the accreditation criteria of engineering technology education programs for junior colleges. CVR(Content Validity Ratio) of four items were below .33 and eliminated four items from the final accreditation criteria. 2. It proved that total Cronbach ${\alpha}$ was very high .9142 and reliability was very high all over items. It proved that six items made worse reliability, therefore it was desirable to exclude six items for increase of reliability. But the final accreditation criteria included six items, because they had a high validity as well as increasing rate of Cronbach ${\alpha}$ was very low with the exception of them. 3. Items of high importance were drawn out through analysis of importance. It proved that thirty of total forty items were more than 4.00 average in importance and ten items were less than average. 4. In conclusion, the final accreditation criteria were developed and presented through such analysis of validity, reliability and importance. The final accreditation criteria for engineering technology education programs in junior colleges were composed of seven domains of educational objectives, learning outcomes, curriculum, staff, facilities, institutional support, and student assessment.

• Journal of Ocean Engineering and Technology
• /
• v.19 no.2 s.63
• /
• pp.47-52
• /
• 2005

This paper introduces a procedure for free span and fatigue analysis of offshore pipelines per DNV-RP-F105, 2002. The new method includes the axial force and deflection load in pipelines. The screening criteria were established to calculate the allowable span lengths in the new design codes. The screening criteria allows a certain amount of vortex-induced vibration due to wave and current loading. However, the induced pipe stresses are very small and usually below the limit stresess of typical S-N curves. In contrast, the conventional criteria did not allow any vortex-induced vibration in the free span of pipelines. Thus, the screening criteria yields reduced allowable span lengths. A simplified procedure was established to calculate the fatigue damage due to long-term current distribution. The long-term current statistics was assumed with a 3-parameter Weibull distribution. The fatigue damage was estimated for the span lengths obtained from the screening criteria for various conditions. Sample calculations show the effect of axial force for various boundary conditions. Comparisons with conventional criteria are included.

• Wind and Structures
• /
• v.18 no.6
• /
• pp.619-631
• /
• 2014

This paper proposes new criteria to fix hidden neuron in Multilayer Perceptron Networks for wind speed prediction in renewable energy systems. To fix hidden neurons, 101 various criteria are examined based on the estimated mean squared error. The results show that proposed approach performs better in terms of testing mean squared errors. The convergence analysis is performed for the various proposed criteria. Mean squared error is used as an indicator for fixing neuron in hidden layer. The proposed criteria find solution to fix hidden neuron in neural networks. This approach is effective, accurate with minimal error than other approaches. The significance of increasing the number of hidden neurons in multilayer perceptron network is also analyzed using these criteria. To verify the effectiveness of the proposed method, simulations were conducted on real time wind data. Simulations infer that with minimum mean squared error the proposed approach can be used for wind speed prediction in renewable energy systems.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.4 no.2
• /
• pp.53-62
• /
• 1998

International Maritime Organizatin(IMO) has been chosen some of agreements for regulating the international stability criteria of fishing vessels and recommended that each goverment adopts theirs into the domestic law. As a result, 77/93 Fishing Safety Agreement was ratified. Among the above agreement, contents of stability was not only applied to domestic law, but also strenghten considerably compared with existing stability criteria. And even if the calculation guide of stability with recommendations was regualted, Analysis of stability on domestic fishing vessels never have been used according to such a caculation method. Moreover, the caculation of stability criteria caused by strong wind, rolling effect and deck inflow was not considered in the existing basic design program. Therefore, the development of stability criteria program available for such a caculation has been of vital impotance. This research has developed a stability criteria program under 77/93 Fishing Safety Agreement. Also through development of stability criteria program, the stability performance of fishing vessel with 69ton stow-nesting was evaluated.

• Perspectives in Nursing Science
• /
• v.1 no.1
• /
• pp.50-65
• /
• 2004

Despite the new wave of diverse philosophical thoughts in nursing, the criteria for theory evaluation rarely incorporate the new thoughts in its realm. Especially, feminist thoughts, which have contributed to the development of nursing knowledge through incorporating diversities and complexities of nursing phenomenon and reflecting social, cultural, and historical contexts surrounding nursing encounters, were rarely incorporated into the evaluation criteria. In this paper, a feminist approach to theory evaluation is proposed based on a critical analysis of the existing evaluation criteria. First, a historical review of feminist thoughts is provided, and feminist principles across diverse groups of thinking within feminism are discussed. Then, theory evaluation criteria are historically analyzed and critiqued while considering the feminist principles. The critical points found in the currently available theory evaluation criteria include: (a) the evaluation criteria are based on objectivity, (b) they are ignoring gender differences; (c) cultural differences tend not to be seriously considered; and (d) contexts surrounding nursing phenomenon are rarely considered. Based on the critical points, four additional components for theory evaluation are proposed. The components are: (a) respect for subjectivity; (b) historical and sociopolitical contextual considerations; (c) gender sensitivity; (d) cultural competence; and (e) blueprint for action.

• KIEAE Journal
• /
• v.2 no.1
• /
• pp.69-76
• /
• 2002

With rapid industrial development, railway has become a main traffic means. But, the railway noise has caused much annoyance for the residents living nearby railway track. Therefore, it is necessary to establish the environmental Quality criteria for railway noise like the environmental quality criteria for traffic noise. In this study, the domestic and foreign criteria for railway noise were investigated with analysis of existing data and an field survey of noise condition near a railway. Fundamental data are provided for establishment of environmental Quality criteria for railway noise.

• Journal of the Korean Dietetic Association
• /
• v.8 no.4
• /
• pp.372-386
• /
• 2002

The purposes of this study were to find factor which influence on the selection criteria of food supplier. Questionnaire were distributed to 52 general hospitals with more than 400 beds located in Seoul and Kyongin province, and responded questionnaires were collected from 44 dietetic departments (84.6%) and 18 purchasing departments (34.6%). The main results of this study can be summarized as follows: (1) supplier selection criteria include quality, service, cost and supplier competency. (2) With having been met with tight competition and market opening, hospitals plan a strategy to improve quality, service and they tend to have more interest in various supplier selection criteria. (3) Purchasing departments estimate more highly the rate of reflection in considering supplier selection criteria than the rate of importance about cost criteria, which reveals that purchasing departments sensitively respond to cost cutdown. (4) When selecting suppliers, a significant(p<.01) influence of stability of supplier industry environment on the selecting criteria such as the importances of quality, service, and supplier quality are recognized only after recognizing the stability of food delivery industry. Food supplier industry secures stability more quickly through major companies' participation in food distribution industry and this will reveal the importance of supplier selection criteria. (5) Suppliers which are selected by the quality criteria, service criteria, supplier quality criteria make efforts to communicate with foodservice departments, to give more proper information about substitute food, new product, and to make commitments, while suppliers which are decided by cost criteria do not establish supportive relationships with foodservice departments.