• 풍력에너지저널
• /
• 제4권1호
• /
• pp.20-29
• /
• 2013

Load measurement, which is performed based on IEC 61400-13, consists of three stages: the stage of collecting huge amounts of load measurement data through a measurement campaign lasting for several months; the stage of processing the measured data, including data validation and classification; and the stage of analyzing the processed data through time series analysis, load statistics analysis, frequency analysis, load spectrum analysis, and equivalent load analysis. In this research, we pursued the development of an analysis software in MATLAB to save labor and to secure exact and consistent performance evaluation data in processing and analyzing load measurement data. The completed analysis software also includes the functions of processing and analyzing power performance measurement data in accordance with IEC 61400-12. The analysis software was effectively applied to process and analyse the load measurement data from a demonstration research for a 750 kW direct-drive wind turbine generator system (KBP-750D), performed at the Daegwanryeong Wind Turbine Demonstration Complex. This paper describes the details of the analysis software and its processing and analysis stages for load measurement data and presents the analysis results.

• 분석과학
• /
• 제28권2호
• /
• pp.117-124
• /
• 2015

Genetically modified (GM) papaya line 55-1, which is resistant to PRSV infection, has been marketed globally. Prompt and sensitive protocols for specific detections are essential for the traceability of this line. Here, an event- and construct-specific real-time polymerase chain reaction (RT-PCR) method was established to detect 55-1. Qualitative detection was possible for fresh papaya fruit up to dilutions of 0.005% and 0.01% for the homozygous SunUp and heterozygous Rainbow cultivars, respectively, in non-GM papaya. The method was applied in the qualitative detection of 55-1 in eight types of commercially processed papaya products. Additionally, papaya products were monitored to distinguish GM papaya using the P35S and T-nos RT-PCR detection methods. As expected, detection capacity was improved via modified sample preparation and the established RT-PCR detection method. Taking these results together, it can be suggested that a suitable method for the extraction and purification of DNA from processed papaya products was established for the detection of GM papaya.

• 한국환경과학회지
• /
• 제17권9호
• /
• pp.957-968
• /
• 2008

The purpose of this study is to analyze the characteristics of hydraulic behavior of the natural channel flow according to the temporal classification mode, and thus propose the hydraulic analysis method for future channel design. For analysis, the temporal flow characteristics of the channel section was divided into the steady flow and the unsteady flow. For hydraulic analysis, the HEC-RAS model, which is a one-dimensional numerical analysis model, and the SMS-RAM2 model, which is a two-dimensional model, were used and the factors used for analysis of hydraulic characteristics were flood elevation and flow rate. The flow state was analyzed on the basis of the one-dimensional steady flow and unsteady flow for review. In the unsteady flow analysis the flow rate changed by $(-)0.16%{\sim}(+)0.26%$, and the flood elevation varied by $(-)0.35%{\sim}(+)0.51%$ as compared to the values in the steady flow analysis. Given these results, in the one-dimensional flow analysis based on the unsteady flow the flood elevation and flow rate were greater than when the analysis was done on the basis of the steady flow. The flow state was analyzed on the basis of the two-dimensional steady flow and unsteady flow. In the unsteady flow analysis the flow rate varied by $(-)0.16%{\sim}(+)1.08%$, and the flood elevation changed by $(-)0.24%{\sim}(+)0.41%$ as compared to the values in the steady flow analysis. Given these analysis results, in the two dimensional flow analysis based on the unsteady flow, the flood elevation and flow rate were greater than when the analysis was done on the basis of the steady flow.

• 한국실내디자인학회논문집
• /
• 제18권4호
• /
• pp.97-104
• /
• 2009

This thesis analyzed arrangement and mixture method of function elements, which are getting more important in museum planning. It used quantitative method, Space Syntax and Visibility Graph Analysis tool to analyze five case museums. Through this analysis, advantages and disadvantages of two methods were derived and case museums' arrangement and mixture attributes were grasped. Results of the analysis were derived differently by two kinds of plan form which were room to room type and open type. Open typed museum recorded similar graphs of Integration, Visual Integration and Visual Connectivity. Since whole space structures were relatively simple and structure of exhibition halls were opened, the results of Space Syntax and Visibility Graph Analysis had similar graphs. Room to room typed museum showed differences in Integration, Visual Integration and Visual Connectivity. In the result, the most accessible space was lobby and Mediation Space became the center of visibility. Also, the exhibition hall, where the opening of room to room typed exhibition hall was penetrated visually, became a center of visibility. Lobby space, which was close to entrance, had the highest Visibility Connectivity. As Space Syntax could analyze the museum as whole space structure, Space Syntax showed strength in room to room typed museum analysis compared to open typed museum analysis which has relatively simple structure. Visibility Graph Analysis could expect the flow of exhibit distance including visibility analysis unlike the flow of exhibit distance with space arrangement. The exhibition hall, which secures the sight to penetration of an opening, couldn't be analyzed in existing Space Syntax. However, it became the biggest advantages in Visibility Graph Analysis of room to room typed museum. Visibility Graph Analysis derived detailed results in exhibit arrangement so it will be the useful method not only for architecture but also for planning of exhibit arrangement in open typed museum. Through this study, various possibilities on Quantitative Analysis Method of Museum Architecture could be verified. However, the analysis still has limitation of second dimension. Therefore, diverse and liberal following study will be expected to accomplish.

• 한국컴퓨터정보학회논문지
• /
• 제15권4호
• /
• pp.37-45
• /
• 2010

시간적 정확성을 필요로 하는 시스템은 신뢰성을 위하여 실행시간에 관한 정확한 설계와 검증이 필요하다. 따라서 실행시간의 분석을 위한 개발 지원 도구가 필요하고 이를 위한 많은 연구가 진행되고 있다. 이러한 개발 지원 도구의 분석 방법은 정적 분석 방법과 측정 기반 분석 방법의 두 가지로 구분된다. 먼저 정적 분석은 짧은 시간에 분석이 가능하지만, 다양한 하드웨어의 존재로 인해 I/O 정보 예측이 어려워 분석 결과의 신뢰성이 떨어진다. 두 번째로 측정 기반 분석은 실제 결과에 근접한 분석이 가능하지만, 사용하기 어렵고 분석에 걸리는 시간이 길다. 이러한 분석 방법의 문제를 해결하기 위하여 본 논문에서는 정적 분석 과정에 소프트웨어 감시 방안을 적용한 방법을 제안한다. 제안하는 분석 방안은 정적 분석을 통해 감시가 필요한 대상을 자동으로 결정하고 감시 결과를 통해 과대 예측을 줄일 수 있다. 따라서 감시에 대한 어려움과 시간의 부하를 줄이고 정적 분석의 가장 큰 문제점인 신뢰성을 향상시킬 수 있다.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2001년도 Proceedings of International Convention of the Pharmaceutical Society of Korea
• /
• pp.289.1-289.1
• /
• 2001

• 전기학회논문지
• /
• 제57권3호
• /
• pp.363-368
• /
• 2008

In this paper, the Resistive Companion Form(RCF) analysis method is applied to analyze small signal stability of power systems including thyristor controlled FACTS equipments such as SVC. The eigenvalue sensitivity analysis algorithm in discrete systems based on the RCF analysis method is presented and applied to the power system including SVC. As a result of simulation, the RCF analysis method is proved very effective to precisely calculate the variations of eigenvalues or newly generated unstable oscillation modes after periodic switching operations of SVC. Also the eigenvalue sensitivity analysis method based on the RCF analysis method enabled to precisely calculate eigenvalue sensitivity coefficients of controller parameters about the dominant oscillation mode after periodic switching operations in discrete systems. These simulation results are different from those of the conventional continuous system analysis method such as the state space equation and proved that the RCF analysis method is very effective to analyze the discrete power systems including periodically operated switching equipments such as SVC.

• Journal of Welding and Joining
• /
• 제19권5호
• /
• pp.492-498
• /
• 2001

In the previous study, temperature monitoring of case about shrinkage fit process was performed and heat transfer model was developed in detail by feedback and tuning among monitoring result, process investigation, and analysis result. The gap element in contact between case and core was effectively used in analysis model. In present study, following things are performed to solve deformation of case due to shrinkage fit process on the basis of previous result. Above all, mechanical material properties of case are measured by case specimen for deformation analysis considering weldment of case. Deformation of case before and after shrinkage fit process is measured, too. Three dimensional deformation model is developed by the comparison and inspection between these experimental data and analysis results. Deformation analysis is simulated with the result of heat transfer analysis, in other words, non-coupled analysis is used. Finally the countermeasure for deformation is brought up through those.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2010년도 춘계학술대회
• /
• pp.226-234
• /
• 2010

In this thesis, we present process that remove mistake of data before statistical analysis. If field data which is not simple examination about validity of data, we cannot believe analyzed statistics information. As statistical analysis information is produced based on data to be input in statistical analysis process, the data to be input should be free of error. In this paper, we study the application of statistical analysis road map that can enhance application on site by organizing basic theory and approaching on initial data exploratory phase, essential step before conducting statistical analysis. Therefore, access to statistical analysis can be enhanced and reliability on result of analysis can be secured by conducting correct statistical analysis.

• 소성∙가공
• /
• 제15권3호
• /
• pp.183-188
• /
• 2006

Heat transfer coefficients have great influence on finite element analysis results in elevated temperature forging processes. Experimentally calculated contact heat transfer coefficient is not suitable for one-time finite element analysis because analyzed temperature will be appeared to be too low. To get contact heat transfer coefficient for one-time finite element analysis, tool temperature in operation was measured with thermocouple and repeated finite element analysis was performed with experimentally calculated contact and cooling heat transfer coefficient. Surface temperature of active tool was obtained comparing measurement and analysis results. Contact heat transfer coefficient for one-time finite element analysis was achieved analyzing surface temperature between repeated finite element analysis and one-time finite element analysis results.