• 한국전기전자재료학회논문지
• /
• 제32권1호
• /
• pp.30-34
• /
• 2019

A newly proposed T-shape piezoelectric actuator, composed of piezoelectric benders, was designed and studied. This actuator has four legs, and can walk in both forward and backward directions. The piezoelectric actuator has a simple structure and can be easily fabricated. It consists of a piezoelectric bender and a joint. The piezoelectric bender is composed of carbon and ceramic materials. Therefore, there is an advantage in that it can be fabricated on a very small scale. Elliptical displacements of the piezoelectric actuators were analyzed by finite element analysis. Elliptical motion at the tip occurred at two voltages having a 90-degree phase difference. Based on the finite element analysis results, prototype actuators with maximum displacements were fabricated, and the characteristics of their movements were characterized.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.261-264
• /
• 2004

This paper presents the design and test of elliptical vibration assisted cutting tool post. It is actuated by two piezoelectric actuators which are connected to the moving part through the elastic hinge with its role of imposing the preliminary pressures. These two actuators are located at right angles so that the resulting tool tip moves like a two-dimensional ellipse. Also, the tool post is activated within the region of linear actuation in order to overcome the distorted elliptical motion. For the precise measurement of the displacement of the tool tip, three-dimensional experimental apparatus was designed and the strokes of the tool post in major and minor axes were measured. The results show that the tool post can produce the variety of vibration locus from a circle with a radius of 5 ${\mu}{\textrm}{m}$ to an ellipse with a major axis, a =10 ${\mu}{\textrm}{m}$, and a minor axis, b =2.5 ${\mu}{\textrm}{m}$

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.627-630
• /
• 2004

Transducer for linear ultrasonic motor with symmetric and anil anti-symmetric modes was studied. The transducer was composed of two Langevin-type vibrators that cross at right angles with each other at tip. In order to excite two vibration modes, two Langevin-type vibrators must have 90-degree phase difference with each other. As a result, tip of transducers moves in elliptical motion. Elliptical trajectoric of transducer was analyzed by employing the finite element method. From these results, the ultrasonic motor was fabricated and was measured for characteristics. In this paper compared an ANSYS analysis with an experiment results. The no-road maximum speed was 113.1[cm/s].

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.741-743
• /
• 2000

In this paper the relationship between the pressing force applied to rotors and the characteristics of ultrasonic motor are discussed. The characteristics of ultrasonic motor using a piezoelectric vibrator were systematically studied. And these were applied to the construction of a card forwarding device. The principle of ultrasonic motor is to use an elliptical motion generated on the side of the vibrator, and the elliptical motion of the ultrasonic motor was obtained by complex oscillation of $L_1-B_4$ mode. As the experimental results. the forwarding speed of the card increased linearly as the pressing force applied to rotors increased. The forwarding speed of the card was 16.0 cm/s when the pressing force applied to rotors was 1 N. The forwarding force of the card increased linearly as the pressing force applied to rotors increased. The forwarding force of the card was 398 mN when the pressing force applied to rotors was 1 N. Therefore, this ultrasonic motor can be expected to be used for card-forwarding device and so on.

• Current Optics and Photonics
• /
• 제5권1호
• /
• pp.8-15
• /
• 2021

An elliptical zone plate (EZP) array is important in off-axis optical systems because it provides two advantages. First, the residual beam and the main source are not focused in the same direction and second, the light from the observation plane is not reflected back towards the beam source. However, the fill factor of the previous EZP array was about 76% which was a little low. Hence, this EZP array could not collect the maximum amount of illumination light, which affected the overall optical performance of the lens array. In this study, we propose a new EZP array design with a 97.5% fill factor used in off-axis imaging system for enhancement of brightness and contrast. Then, direct laser lithography was used to fabricate the high fill factor EZP array by moving the XY linear stage of the system in a zigzag motion. The imaging properties of the proposed EZP array were experimentally verified at the focal plane and compared with the previous model.

• 한국항공우주학회지
• /
• 제39권2호
• /
• pp.137-143
• /
• 2011

중력구배 인공위성의 pitch 운동이 관성 모멘트 비와 편심율에 따라 혼돈계가 될 수 있다. 혼돈계의 경우 운동의 정확한 예측을 위하여 비혼돈계로 전환하는 혼돈계 제어가 필요하다. 혼돈계 제어에는 feedback control system을 사용할 수 있다. 중력구배 인공위성의 pitch 운동의 혼돈계 제어를 위하여, 비선형 pitch 운동 방정식을 선형화를 하여 linear nonautonomous system을 구하고, 이를 근거로 pitch 운동의 혼돈계 제어와 안정화(stabilization)를 위한 제어법칙을 설계하고 원래의 비선형 혼돈계 pitch 운동에 적용하였다. 설계된 pitch 운동 제어계는 두 개의 parameter를 가지는데, 혼돈계 제어와 안정화에 만족할 만한 결과를 보여주었다.

• 한국전기전자재료학회논문지
• /
• 제16권8호
• /
• pp.669-675
• /
• 2003

Transducer for ultrasonic linear motor with symmetric and anti- symmetric modes was studied. The ultrasonic linear motor consists of two Langevin type piezoelectric vibrators that cross at right angles with each other in tip. In order to excite symmetric and anti-symmetric modes, the transducer must have a phase shift of 90 degree in space and time. As a result, the tip of transducer moves on an elliptical motion. In this paper, the finite element analysis was used to optimize dimension and displacement of the transducer.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1285-1286
• /
• 2007

In this study, novel structured thin ultrasonic rotary motor has been proposed. Ultrasonic motors are based on an elliptical motion on the surface of elastic body. ATILA ver. 5.2.4 was used for optimizing stator. The motor was fabricated by using designed stator. And characteristics of the motor were compared with simulated results. When the motor was fabricated with these results, 860[rpm] speed was obtain by input voltage of 16[Vrms] at 92.5[kHz].

• 한국기계가공학회지
• /
• 제17권5호
• /
• pp.37-44
• /
• 2018

In laser material processing for high thermal conductivity, the thermal effect of laser beam shape was examined through computer simulations. In this paper, a circular beam with a focal radius of $500{\mu}m$, an elliptical beam with a major axis of 4 mm and a minor axis of 1 mm, and a rotating beam with a focal radius of $500{\mu}m$ and an angular velocity of 5 rad/sec were compared. Simulation results showed that there was no clear difference in the maximum temperature between the circular focus and the elliptical shape, but the heating and cooling rates were different. The simulation result for a laser beam rotating in a circular pattern with a radius of 5 mm showed an asymmetric temperature rise due to the combination of linear and rotational motion. At points where the rotational and linear speeds combined, the temperature gradually rose and reached the maximum temperature; whereas at points where the rotational and linear speeds were attenuated, the temperature tended to gradually decrease after reaching the maximum temperature. Based on the results of this study, the authors expect to be able to optimize laser material processing by designing patterns of laser beams.

• 한국운동역학회지
• /
• 제22권2호
• /
• pp.173-181
• /
• 2012

The purpose of this study was to research on the movement of Fouette A La Second which was a type of turning movements on cheerleading. This research was conducted for helping cheerleaders to improve their overall skills. The three cheerleading national team members were participated in this research and the movements of Fouette A La Second were recorded with 6 digital motion master 60 video cameras, operating at a sampling frequency of 60 fields/sec. Six out of ten turning motion data were collected and analyzed with Kwon3D XP. The results were as follow: 1) The subject A's Releve motion was not executed precisely because of the COG's unstability. So she was required to improve the balancing ability. 2) The subject B could not execute the precise A La Second motion because of subject B's large hip angle. By tracing the projection of B's right toe on x-y plane, the subject made an elliptical orbit. Because B did not have a proper turning skills she needed to improve the muscle power and flexibility. She also needed to move quickly from Releve to Plie movement. 3) The subject C could not execute the Plie movement precisely, so she could not turn her body correctly around a certain spot. The subject C needed to decrease the knee angle at the Plie motion.