• 대한원격탐사학회지
• /
• 제13권1호
• /
• pp.1-12
• /
• 1997

지구상에서 가장 따뜻한 해수면 온도를 가지고 있는 열대 서태평양은 많은 대류 시스템 과 큰 연강수략에 의해 특징지워진다. GMS-IR 자료로부터 얻어진 운량자료를 이용하여 이 지역 에서의 운량 일변동을 조사하였다. 구름의 시공간적인 분포에 관한 특징은 주로 운량의 일주기 및 반일주기 성분의 진폭과 주기를 통해 조사되었다. 대기-해양의 상호작용에 의해 운량 변동에는 다양한 주기들이 나타났는데, 특히 30-60일, 17-20 일, 7-8일, 일주기와 반일주긱가 탁월하였다. 북반구 겨울(남반구 여름) 기간 동안 뉴기니아, 호주 북부에 인접한 해양 그리고 160도E 동쪽에서 큰 운량이 분포하는 것으로 조사되었다. 육지와 인 접 해성에서의 운량 일변동은 외양의 경우에 비해 약 2배 정도 크게 나타났는데, 이것은 주로 해 양과 육지의 전형적인 비열차에 기인한 것으로 여겨진다. 운량의 최대치와 최소치는 육상의 경우 18:00시와 09:00시에 나타났고, 외양에서는 정오와 21:00시에 나타났다. 1일주기 성분의 진폭은 반 일주기 성분에 비해 육상에서 4.7배, 외양에서 1.5배 정도 크게 나타났다.

• Ocean Systems Engineering
• /
• 제9권4호
• /
• pp.423-448
• /
• 2019

Very Large Floating Structures (VLFS) are one among the solution to pursue an environmentally friendly and sustainable technology in birthing land from the sea. VLFS are extra-large in size and mostly extra-long in span. VLFS may be classified into two broad categories, namely the pontoon type and semi-submersible type. The pontoon-type VLFS is a flat box structure floating on the sea surface and suitable in regions with lower sea state. The semi-submersible VLFS has a deck raised above the sea level and supported by columns which are connected to submerged pontoons and are subjected to less wave forces. These structures are very flexible compared to other kinds of offshore structures, and its elastic deformations are more important than their rigid body motions. This paper presents hydroelastic analysis carried out on an innovative VLFS called truss pontoon Mobile Offshore Base (MOB) platform concept proposed by Srinivasan and Sundaravadivelu (2013). The truss pontoon MOB is modelled and hydroelastic analysis is carried out using HYDRAN-XR^* for regular 0° waves heading angle. Results are presented for variation of added mass and damping coefficients, diffraction and wave excitation forces, RAOs for translational, rotation and deformational modes and vertical displacement at salient sections with respect to wave periods.

• Structural Engineering and Mechanics
• /
• 제61권2호
• /
• pp.209-220
• /
• 2017

The purpose of this paper is to study the geometrically nonlinear free vibration of functionally graded nano/micro beams (FGNBs) based on the modified couple stress theory. For practical applications, some analytical expressions of nonlinear frequencies for FGNBs on a nonlinear Pasternak foundation are developed. Hamilton's principle is employed to obtain nonlinear governing differential equations in the context of both Euler-Bernoulli and Timoshenko beam theories for a comprehensive investigation. The modified continuum theory contains one material length scale parameter to capture the size effect. The variation of two-constituent material along the thickness is modeled using Reddy's power-law. Also, the Mori-Tanaka method as an accurate homogenization technique is implemented to estimate the effective material properties of the FGNBs. The results are presented for both hinged-hinged and clamped-clamped boundary conditions. The nonlinear partial differential equations are reduced to ordinary differential equations using Galerkin method and then the powerful method of homotopy analysis is utilized to obtain the semi-analytical solutions. Eventually, the presented analytical expressions are used to examine the influences of the length scale parameter, material gradient index, and elastic foundation on the nonlinear free vibration of FGNBs.

• 한국항해항만학회지
• /
• 제26권4호
• /
• pp.441-447
• /
• 2002

전세계적인 인구증가와 산업화로 인하여 육지면적의 부족, 육상자원의 고갈 등의 문제로 해양의 이용 및 개발의 관심이 늘어나고 있으며, 환경친화적인 해양공간을 확보하기 위하여 초대형 부유식 해상구조물에 대한 기술개발이 요구되고 있다. 본 논문에서는 초대형 부유식 구조물의 상부구조물에 대한 시간이력해석법에 대하여 소개하고 파랑하중에 의한 부체변형을 이용한 시간변위이력 산정 방법을 제안한다. 또한 주기 및 진폭의 변화에 따른 상부구조물의 동적 시간이력응답 결과를 분석하고 초대형 부유식 상부구조물 시설계안의 동적구조안전성을 평가한다.

• Wind and Structures
• /
• 제27권6호
• /
• pp.357-368
• /
• 2018

For a long cable-stayed bridge, stay cables are its most important load-carrying components. In this paper, long-term monitoring of super-long stay cables of Sutong Bridge is introduced. A comprehensive data analysis procedure is presented, in which time domain and frequency domain based analyses are carried out. In time domain, the vibration data of several long stay cables are firstly analyzed and the standard deviation of the acceleration of stay cables, and its variation with time are obtained, as well as the relationship between in-plane vibration and out-plane vibration. Meanwhile, some vibrations such as wind and rain induced vibration are detected. Through frequency domain analysis, the basic frequencies of the stay cables are identified. Furthermore, the axial forces and their statistical parameters are acquired. To investigate the vibration deflection, an FFT-based decomposition method is used to get the modal deflection. In the end, the relationship between the vibration amplitude of stay cables and the wind speed is investigated based on correlation analysis. Through the adopted procedure, some structural parameters of the stay cables have been derived, which can be used for evaluating the component performance and corresponding management of stay cables.

• 한국기계가공학회지
• /
• 제21권1호
• /
• pp.41-48
• /
• 2022

Vehicle vibration was introduced in the time and frequency domains using fast Fourier transform (FFT) analysis. In particular, a vibration mode analysis and characteristics of the frequency response function (FRF) in a sport utility vehicle (SUV) passing over a bump barrier at different speeds was performed systematically. The response behavior of the theoretical acceleration was obtained using a numerical method applied to the forced vibration model. The amplitude and frequency of the external force on the vehicle cause various power spectra with individual intrinsic system frequencies. In this regard, several modes of power spectra were acquired from the spectra and are discussed in this paper. The proposed technique can be used for monitoring the acceleration in a vehicle passing over a bump barrier. To acquire acceleration signals, various experimental runs were performed using the SUV. These acceleration signals were then used to acquire the FRF and to conduct mode analysis. The vehicle characteristics according to the vehicle condition were analyzed using FRF. In addition, the vehicle structural system and bump passing frequencies were discriminated based on their power spectra and other FRF spectra.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.643-646
• /
• 2005

The gas hydrate exploration using seismic reflection data, the detection of BSR(Bottom Simulating Reflector) on the seismic section is the most important work flow because the BSR have been interpreted as being formed at the base of a gas hydrate zone. Usually, BSR has some dominant qualitative characteristics on seismic section i.e. Wavelet phase reversal compare to sea bottom signal, Parallel layer with sea bottom, Strong amplitude, Masking phenomenon above the BSR, Cross bedding with other geological layer. Even though a BSR can be selected on seismic section with these guidance, it is not enough to conform as being true BSR. Some other available methods for verifying the BSR with reliable analysis quantitatively i.e. Interval velocity analysis, AVO(Amplitude Variation with Offset)analysis etc. Usually, AVO analysis can be divided by three main parts. The first part is AVO analysis, the second is AVO modeling and the last is AVO inversion. AVO analysis is unique method for detecting the free gas zone on seismic section directly. Therefore it can be a kind of useful analysis method for discriminating true BSR, which might arise from an Possion ratio contrast between high velocity layer, partially hydrated sediment and low velocity layer, water saturated gas sediment. During the AVO interpretation, as the AVO response can be changed depend upon the water saturation ratio, it is confused to discriminate the AVO response of gas layer from dry layer. In that case, the AVO modeling is necessary to generate synthetic seismogram comparing with real data. It can be available to make conclusions from correspondence or lack of correspondence between the two seismograms. AVO inversion process is the method for driving a geological model by iterative operation that the result ing synthetic seismogram matches to real data seismogram wi thin some tolerance level. AVO inversion is a topic of current research and for now there is no general consensus on how the process should be done or even whether is valid for standard seismic data. Unfortunately, there are no well log data acquired from gas hydrate exploration area in Korea. Instead of that data, well log data and seismic data acquired from gas sand area located nearby the gas hydrate exploration area is used to AVO analysis, As the results of AVO modeling, type III AVO anomaly confirmed on the gas sand layer. The Castagna's equation constant value for estimating the S-wave velocity are evaluated as A=0.86190, B=-3845.14431 respectively and water saturation ratio is $50\%$. To calculate the reflection coefficient of synthetic seismogram, the Zoeppritz equation is used. For AVO inversion process, the dataset provided by Hampson-Rushell CO. is used.

• 대한조선학회논문집
• /
• 제54권3호
• /
• pp.227-241
• /
• 2017

In this study, a Volterra system for the variations of metacentric height (GM) in waves is employed to simulate the parametric roll phenomena of ships in head sea condition. Using the present Volterra system, the transfer function of each harmonic component in the GM variation is computed for different ship models, including mathematical models and a real containership, and the results are validated through the comparison with the values obtained using the direct calculations based on a weakly nonlinear time-domain method. Then, a semi-analytic approach employing a 1-degree of freedom equation for roll motion is developed to simulate the parametric roll motions in irregular waves. In the derived approach, the nonlinear and time-varying restoring forces in the waves are approximated using the Volterra system. Through simulations of the parametric roll for different sea states, the effects of the 1st and 2nd-order harmonic components of the variations in the occurrence and amplitude of the parametric roll motions are investigated. Because of the strong nonlinearities in the phenomena, a stochastic analysis is conducted to examine the statistical properties of the roll motions in consideration of the sensitivities and uncertainties in the computations.

• Journal of Astronomy and Space Sciences
• /
• 제29권4호
• /
• pp.329-336
• /
• 2012

Korea Astronomy and Space Science Institute researchers have installed and operated magnetometers at Bohyunsan Observatory to measure the Earth's magnetic field variations in South Korea. In 2007, we installed a fluxgate magnetometer (RFP-523C) to measure H, D, and Z components of the geomagnetic field. In addition, in 2009, we installed a Overhauser proton sensor to measure the absolute total magnetic field F and a three-axis magneto-impedance sensor for spectrum analysis. Currently three types of magnetometer data have been accumulated. In this paper, we use the H, D, Z components of fluxgate magnetometer data to investigate the characteristics of mid-latitude geomagnetic field variation. To remove the temporary changes in Earth's geomagnetic filed by space weather, we use the international quiet days' data only. In other words, we performed a superposed epoch analysis using five days per each month during 2008-2011. We find that daily variations of H, D, and Z shows similar tendency compared to previous results using all days. That is, H, D, Z all three components' quiet intervals terminate near the sunrise and shows maximum 2-3 hours after the culmination and the quiet interval start from near the sunset. Seasonal variations show similar dependences to the Sun. As it becomes hot season, the geomagnetic field variation's amplitude becomes large and the quiet interval becomes shortened. It is well-known that these variations are effects of Sq current system in the Earth's atmosphere. We confirm that the typical mid-latitude geomagnetic field variations due to the Sq current system by excluding all possible association with the space weather.

• 한국대기환경학회지
• /
• 제9권1호
• /
• pp.61-68
• /
• 1993

Since November 1990, the observations of carbon dioxide$(CO_2)$ levels have been carried out at Tae-ahn Peninsula(TAP) in Korea. Analysis on atmospheric data obtained in the period from November 1990 to August 1992 is carried out and the results are included in this study. It is observed that variations of monthly average level on $CO_2$ are in the range of 315.72 $\sim$ 365.37ppm(amplitude 17.65ppm). The seasonal variation is large with a maximum occurring in March-April and with a minimum in July-August. A comparison of TAP data is made with data obtained at Ryori in Japan for 1991. The annual average value of TAP is 1.79ppm higher than that of Ryori. It is also found that in summer the minimum level of $CO_2$ at TAP is almost same as the $CO_2$ level occurring at Quinghai Province in China and at Ulaan Uul in Mongolia. Albeit, a maximum concentration of $CO_2$ at TAP is slightly higher than that of the same gas observed at other sites in spring. We interpret that TAP is generally under the influence of airflows coming from China. According to analysis of trajectories and airflows, we find the high values of $CO_2$ when an air flow is originated mainly from China and when an airflow is both of local(Korea) and of China origins. In contrast, when an airflow of maritime origin arrives, a low value of the atmospheric constituent is observed at TAP.