• 비파괴검사학회지
• /
• 제27권3호
• /
• pp.255-261
• /
• 2007

By using numerical analysis methods, through transmission type pulsed eddy current (PEC) testing is modeled and PEC signal responses due to varying material conductivity, permeability, thickness, lift-off and pulse width are investigated. Results show that the peak amplitude of PEC signal gets reduced and the time to reach the peak amplitude is increased as the material conductivity, permeability, and specimen thickness increase. Also, they indicate that the pulse width needs to be shorter when evaluating the material conductivity and the plate thickness using the peak amplitude, and when the pulse width is long, the peak time is found to be more useful. Other results related to lift-off variation are reported as well.

• Journal of Magnetics
• /
• 제3권2호
• /
• pp.41-43
• /
• 1998

The frequency spectra of complex permeability have been measured as a function of ac field amplitude in the annealed amorphous $Fe_{83}Zr_7B_8Cu_2 $ ribbons. The longitudinal permeability results from the rotational magnetization at small fields, $h_o$<5 mOe in as-quenched samples. However, at the further increase of ho, the wall motion begins to be involved in the low frequency region. The permeability from the wall motion drastically decreases in the annealed sample, while that from the rotational magnetization increases up to annealing temperature of 50$0^{\circ}C$ and then drops there after.

• 한국자기학회지
• /
• 제25권4호
• /
• pp.123-128
• /
• 2015

철은 강도와 경도가 높고 전기전도도가 훌륭한 원소이며, 또한 가공이 쉽기 때문에 다양한 분야에서 사용되고 있다. 교량에서는 큰 하중이면서도 경량화를 위하여 강철선으로 된 텐던이 사용되고 있다. 철이 구조용 강으로 사용될 경우 중요한 문제 중 하나인 안전 진단을 위해서는 비파괴 검사(Non-Destructive Testing)가 필수적인데 철강의 자기적 특성이 비선형의 자화곡선과 이력(hysteresis)현상이 있는 자기이력곡선으로 인하여 비파괴 검사에 적용이 어렵다. 본 연구에서는 교량에 부착되어 있는 텐던의 인장변형력을 비파괴 적이면서 자기적인 방법으로 측정하기 위한 기초 연구로, 텐던의 인장변형력에 의한 자기이력 특성변화를 관찰하기 위하여 직경 15.5 mm의 7-strand 텐던에 인장력을 0에서 2 GPa까지 인가할 수 있는 자기이력곡선 측정 장치를 제작하였다. 제작 된 자기이력곡선 측정 장치를 이용하여 시판되고 있는 두 제조회사의 텐던에 대하여 자기적 특성을 조사하였고, 인장변형력에 따른 자기적 특성의 변화가 가장 큰 부분은 자기이력곡선 상의 knee 부분 근처에서의 상대 진폭투자율로 500에서 200까지 감소하였으며 최대 자속밀도 또한 0.6 T 정도로 변화하였다. 텐던의 인장변형력을 측정하는 방법으로 knee 부분의 진폭투자율 측정뿐만 아니라 최대 자속밀도의 측정방법도 가능할 것으로 생각된다.

• The Korean Journal of Physiology and Pharmacology
• /
• 제9권2호
• /
• pp.69-75
• /
• 2005

TRPM7, a cation channel protein permeable to various metal ions such as $Mg^{2+}$, is ubiquitously expressed in variety of cells including lymphocytes. The activity of TRPM7 is tightly regulated by intracellular $Mg^{2+}$, thus named $Mg^{2+}$-inhibited cation (MIC) current, and its expression is known to be critical for the viability and proliferation of B lymphocytes. In this study, the level of MIC current was compared between immature (WEHI-231) and mature (Bal-17) B lymphocytes. In both cell types, an intracellular dialysis with $Mg^{2+}$-free solution (140 mM CsCl) induced an outwardly-rectifying MIC current. The peak amplitude of MIC current and the permeability to divalent cation ($Mn^{2+}$) were several fold higher in Bal-17 than WEHI-231. Also, the level of mRNAs for TRPM7, a molecular correspondence of the MIC channel, was significantly higher in Bal-17 cells. The amplitude of MIC was further increased, and the relation between current and voltage became linear under divalent cation-free conditions, demonstrating typical properties of the TRPM7. The stimulation of B cell receptors (BCR) by ligation with antibodies did not change the amplitude of MIC current. Also, increase of extracellular $[Mg^{2+}]_c$ to enhance the $Mg^{2+}$ influx did not affect the BCR ligation-induced death of WEHI-231 cells. Although the level of TRPM7 was not directly related with the cell death of immature B cells, the remarkable difference of TRPM7 might indicate a fundamental change in the permeability to divalent cations during the development of B cells.

• 한국추진공학회지
• /
• 제5권4호
• /
• pp.1-11
• /
• 2001

다공성 카본 페놀릭 복합재의 재료상수를 실험데이터로부터 결정하기 위하여 시간의존 이론과 유한요소법을 적용하였다. 이 이론은 Biot 의 상수와 투과율 사이의 관계를 다공성의 함수로 사용하여 기존의 Lee, Salamon, Sullivan[1］의 논문을 수정하였다. 수정된 유한요소 프로그램과 재료의 모델링은 (1) 다공성 재료 이론에 더 충실하고 (2) 새롭게 발견된 해석적 단순함을 포함하고 (3) 재료의 성질을 더욱 정확하게 기술하였다. 실험 데이터에 대한 적용과 비교는 어떻게 재료의 파라미터들이 재료의 응답 즉 온도에 따르는 압력의 크기와 최대치의 위치 지배되는지 명백하게 나타낸다. 특별히 응답이 투과율에 매우 민감하게 나타났다.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• 제5권1호
• /
• pp.14-21
• /
• 2002

In the present paper, the hydrodynamic properties of a Rahmen-type, flexible, porous breakwater interacting with obliquely or normal- incident small amplitude waves are numerically investigated. This system is composed of dual vertical porous membranes, hinged at the side edges of a submerged horizontal membrane. The dual vertical membranes are extended downward and hinged at seabed. The effects of permeability, Rahmen-type membrane breakwater geometry, pre-tensions on membranes, relative dimensionless wave number, and incident wave headings are thoroughly examined.

• 한국자기학회지
• /
• 제16권4호
• /
• pp.211-215
• /
• 2006

구조 강이나 터빈로터 강의 기계적 물성은 자기적 특성과 관계되므로, 비파괴적으로 자기적 특성을 측정하여 기계적 물성을 평가하는 연구가 많이 수행되었다. 따라서 자동차용 강판으로 사용되는 냉연강판에서도 비파괴적으로 자기적 특성을 측정함으로써 냉연강판의 기계적 물성을 유추할 수 있을 것이고, 냉연강판 생산 라인에서 자기적 특성을 측정하여 온라인상에서 냉연강판의 기계적 특성을 모니터할 수 있을 것이다. 기계적 특성이 다른 세 종류의 냉연강판 CBQ 3060, CBQ 3041 및 CBQ 3036의 시편을 준비하고 교류 섭동 자기장을 인가하여 자기적 특성인 가역투자율을 비파괴적으로 측정함으로서 기계적 물성인 경도와의 상관관계를 규명하였다. 세 종류의 냉연강판 시편에서 기계적 물성인 비커스 경도, 항복강도 및 인장강도를 측정하였다. 주파수가20 Hz일 때, surface type 프로브로 측정한 섭동자기장의 제 1차 고조파인 가역투자율의 피크 간 간격에서 구한 보자력은 비커스경도, 항복강도 및 인장강도가 증가할 때 선형적으로 증가하였다. 주파수 20 Hz에서 lift-off에 대한 가역투자율 측정을 하였는데,lift-off가 증가함에 따라 고조파의 amplitude가 급격히 감소하였다.

• 한국재료학회지
• /
• 제13권6호
• /
• pp.365-368
• /
• 2003

Small amounts of additives such as mol % 0.13 NiO and mol % 0.01 $CaCO_3$were added to Cu-Zn-Mg ferrites. Basic composition of the Cu-Zn-Mg ferrites was $Cu_{Cu}$X/$Fe_{0.054}$ /$Zn_{0.486}$$Mg_{0.407}$ $Fe_{1.946}$ $O_4$(group A) and $Cu_{0.263}$$Fe_{0.027}$ $Zn_{0.503}$ $Mg_{0.262}$ $Fe_{1.973}$ $O_4$(group B). Specimens were sintered at different temperatures (1010, 1030, $1050^{\circ}C$) for 2 hours in air followed by an air cooling. Then, effects of various composition and sintering temperatures on the microstructure and the magnetic properties such as inductions, coercive forces, and initial permeabilities of the Cu-Zn-Mg ferrites were investigated. The average grain size increased with the increase of sintering temperature. The magnetic properties obtained from the aforementioned Cu-Zn-Mg ferrite specimens were 1,724 gauss for the maximum induction, 1.0 oersted for the coercive force, and 802 for the initial permeability. These magnetic properties indicated that the specimens could be utilized as the core of IFT (intermediate frequency transformer) and antenna in the amplitude modulation.

• Geomechanics and Engineering
• /
• 제30권2호
• /
• pp.153-167
• /
• 2022

This study proposes a method to analyze the distribution of coal porosity disturbances after the excavation of ultra-large-diameter water jet boreholes using a coal wetting and softening model. The high-pressure jet is regarded as a short-term high-pressure water injection process. The water injection range is the coal softening range. The time when the reference point of the borehole wall is shocked by the high-pressure water column is equivalent to the time of high-pressure water injection of the coal wall. The influence of roadway excavation with support and borehole diameter on the ultra-large-diameter jet drilling excavation is also studied. The coal core around the borehole is used to measure the gas permeability for determining the porosity disturbance distribution of the coal in the sampling plane to verify the correctness of the simulation results. Results show that the excavation borehole is beneficial to the expansion of the roadway excavation disturbance, and the expansion distance of the roadway excavation disturbance has a quadratic relationship with the borehole diameter. Wetting and softening of the coal around the borehole wall will promote the uniform distribution of the overall porosity disturbance and reduce the amplitude of disturbance fluctuations.

• 한국해안해양공학회:학술대회논문집
• /
• 한국해안해양공학회 2004년도 학술발표논문집 Proceedings of Coastal and Ocean Engineering in Korea
• /
• pp.150-159
• /
• 2004

In the present paper, the hydrodynamics properties of a Rahmen type flexible porous breakwater with dual fixed-pontoon system interacting with obliquely or normally incident small amplitude waves are numerically investigated. This system is composed of dual vertical porous membranes hinged a the side edges of dual fixed pontoons, and a submerged horizontal membrane that both ends are hinged at the steel frames mounted pontoons. The dual vertical membranes are extended downward and hinged at bottom steal frame fixed into seabed. The wave blocking and dissipation mechanism and its effects of permeability, Rahmen type membrane and pontoon geometry, pre-tensions on membranes, relative dimensionless wave number, and incident wave headings are thoroughly examined.