• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.286-287
• /
• 2019

In this paper, we consider an amplify-and-forward (AF) full duplex (FD) massive-antenna relay (or base station) aiding communication between K single-antenna source and destination pairs whose transmissions are overheard by one single-antenna eavesdropper. Maximum ratio combining (MRC) and maximum ratio transmission (MRT) processing is employed at the relay. The secrecy performance of the system is then derived with both relay and destination being equipped with low resolution analog-to-digital converters (ADCs). The results show the detrimental effect of the eavesdropper's presence on the sum rate of the system.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.1
• /
• pp.55-62
• /
• 2009

In this paper, we propose a method on the training sequence based on channel estimation issues for relay networks that employ amplify-and-forward(AF) transmission scheme. In $^{[1]}$ and $^{[2]}$, we have to point out that jointly estimating the channel from source to relay and from relay to destination suffers from many drawbacks in fast fading case because the estimation of previous pilots is not suitable for current channel. In this paper, we consider a new joint estimation of overall channel impulse response(CIR) using one OFDM signal without pilots. Using the maximum likelihood(ML) function, we derive a channel estimator by taking the frequency domain of transmitted signal as Gaussian and averaging the ML function over the resulting Gaussian distribution. Simulation results show that our proposed channel estimator performs a fraction of 1dB compared with $^{[1]}$ in high SNR region.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.795-798
• /
• 2007

In this paper, we proposed a simple power allocation scheme to maximize network lifetime. To maximize network lifetime, it is important to allocate power fairly among nodes in a network as well as to minimize total transmitted power. In the proposed scheme, the allocated power is proportional to the residual power and also satisfies the required SNR at destination node. In this paper, we calculate power allocation in "amplify and forward" (AF) model. We evaluated the proposed power allocation scheme using extensive simulation and simulation results show that proposed power allocation obtains much longer network lifetime than the equal power allocation.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.15-18
• /
• 2005

Cooperative diversity is a transmission technique, in which multiple terminals pool their resources to form a virtual antenna array that realizes spatial diversity gain in a distributed fashion. In this paper, we propose a new type of cooperative transmission protocol with a full rate and show that its BER performance is improved by 8dB over the existing protocol under the AF (amplify-and-forward) mode of relaying.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.3
• /
• pp.1111-1130
• /
• 2016

Cooperative communications can significantly improve the wireless transmission performance with the help of relay nodes. In cooperative communication networks, relay selection and power allocation are two key issues. In this paper, we propose a relay selection and power allocation scheme RS-PA-PSACO (Relay Selection-Power Allocation-Particle Swarm Ant Colony Optimization) based on PSACO (Particle Swarm Ant Colony Optimization) algorithm. This scheme can effectively reduce the computational complexity and select the optimal relay nodes. As one of the swarm intelligence algorithms, PSACO which combined both PSO (Particle Swarm Optimization) and ACO (Ant Colony Optimization) algorithms is effective to solve non-linear optimization problems through a fast global search at a low cost. The proposed RS-PA-PSACO algorithm can simultaneously obtain the optimal solutions of relay selection and power allocation to minimize the SER (Symbol Error Rate) with a fixed total power constraint both in AF (Amplify and Forward) and DF (Decode and Forward) modes. Simulation results show that the proposed scheme improves the system performance significantly both in reliability and power efficiency at a low complexity.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.7
• /
• pp.3431-3445
• /
• 2017

Due to the advantages of low transmit power consumption, high spectral efficiency and extended system coverage, Device-to-Device (D2D) communication has drawn explosive attention in wireless communication field. Considering that intra-cell interference caused between cellular signals and D2D signals, in this paper, a network coding-based D2D relay cooperative transmission algorithm is proposed. Under D2D single-hop relay transmission mode, cellular interfering signals can be regarded as useful signals to code with D2D signals at D2D relay node. Using cellular interfering signals and network coded signals, D2D receiver restores the D2D signals to achieve the effect of interference suppression. Theoretical analysis shows that, compared with Amplify-and-forward (AF) mode and Decode-and-forward (DF) mode, the proposed algorithm can dramatically increase the link achievable rate. Furthermore, simulation experiment verifies that by employing the proposed algorithm, the interference signals in D2D communication can be eliminated effectively, and meanwhile the symbol error rate (SER) performance can be improved.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.9
• /
• pp.4223-4239
• /
• 2016

In this paper, we consider an amplify-and-forward (AF) full-duplex relay network (FDRN) using simultaneous wireless information and power transfer, where a battery-free relay node harvests energy from the received radio frequency (RF) signals from a source node and uses the harvested energy to forward the source information to destination node. The time-switching relaying (TSR) protocol is studied, with the assumption that the channel state information (CSI) at the relay node is imperfect. We deliver a rigorous analysis of the outage probability of the proposed system. Based on the outage probability expressions, the optimal time switching factor are obtained via the numerical search method. The simulation and numerical results provide practical insights into the effect of various system parameters, such as the time switching factor, the noise power, the energy harvesting efficiency, and the channel estimation error on the performance of this network. It is also observed that for the imperfect CSI case, the proposed scheme still can provide acceptable outage performance given that the channel estimation error is bounded in a permissible interval.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.6
• /
• pp.99-105
• /
• 2010

The most frequently used noise model for the performance analysis of a communication system is additive white Gaussian noise. However impulsive noise model is more practical for the real communication environments, currently the performance analysis of a communication system in impulsive noise is increasing. In this paper, therefore, the performance of a cooperative system, which is recently one of the most intensive research topics, is derived in impulsive noise. We analytically derive and compare the performance of two opportunistic cooperative diversity systems which have an amplify-and-forward (AF) relaying or a decode-and-forward (DF) relaying. It is noticed that the impulsive noise component is increases with decreasing the average number of impulses in impulsive noise, consequently the performance of two systems is degraded in high SNR region. Also it is shown that the performance of the opportunistic cooperative system with DF relaying is superior to that with AF relaying.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.7
• /
• pp.805-810
• /
• 2014

Cooperative communication, which transmit signal via arbitrary number of relays, enhances the overall communication performance by providing virtual Multi-Input Multi-Output (MIMO) gain without imposing multiple antennal limitation in physical system. There are two representative relaying protocols, i.e., Amplify-and-Forward (AF) and Decode-and-Forward (DF), where we analyze the performance of cooperative communication by adopting DF relaying protocol applying partially differential modulation. The performance is based on symbol error rate (SER), and the effect of relay location on the performance is analyzed. We also compare the performance of the proposed scheme with the system which uses differential modulation scheme.

• Journal of Communications and Networks
• /
• v.11 no.5
• /
• pp.433-444
• /
• 2009

The bi-directional relay channel is the natural extension of a three-terminal relay channel where node a transmits to node b with the help of a relay r to allow for two-way communication between nodes a and b. That is, in a bi-directional relay channel, a and b wish to exchange independent messages over a shared channel with the help of a relay r. The rates at which this communication may reliably take place depend on the assumptions made on the relay processing abilities. We overview information theoretic limits of the bi-directional relay channel under a variety of conditions, before focusing on half-duplex nodes in which communication takes place in a number of temporal phases (resulting in protocols), and nodes may forward messages in four manners. The relay-forwarding considered are: Amplify and forward (AF), decode and forward (DF), compress and forward (CF), and mixed forward. The last scheme is a combination of CF in one direction and DF in the other. We derive inner and outer bounds to the capacity region of the bi-directional relay channel for three temporal protocols under these four relaying schemes. The first protocol is a two phase protocol where a and b simultaneously transmit during the first phase and the relay r alone transmits during the second. The second protocol considers sequential transmissions from a and b followed by a transmission from the relay while the third protocol is a hybrid of the first two protocols and has four phases. We provide a comprehensive treatment of protocols in Gaussian noise, obtaining their respective achievable rate regions, outer bounds, and their relative performance under different SNR and relay geometries.