• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.531-532
• /
• 2002

This paper present a gain-clamped L-band EDFA based on reflecting back a portion of backward amplified spontaneous emission into the erbium-doped fiber section, utilizing a fiber Bra99 grating. By using FBG with R=66.1 and 99.9%, the gain is clamped at 15.1 and 14.3㏈, respectively, with a variation of less than 0.2㏈ for an input signal power as high as -5 ㏈m. However, a small noise figure penalty is obtained, which is the consequence of the gain clamping effect.

• 한국광학회지
• /
• 제4권2호
• /
• pp.212-219
• /
• 1993

다중모드 레이저의 모드에 의해 광대역 CARS 분광에 생기는 모드 잡음을 줄이기 위하여 색소레이저의 증폭자발방출을 스톡스광으로 사용하여 CARS 분광을 측정하였다. 측정된 광대역 CARS 분광에 생기는 분광의 변조 폭에서 미량기체의 농도를 계산하는 새로운 방법을 제안하였으며, 변조 폭을 미랭기체의 농도와 기체 온도 변화에 대하여 수치적으로 계산하고 이를 분석하여, 계산된 변조 폭을 농도와 온도에 대한 함스로 기술하였다. 이러한 방법을 Ar과 미량의 CO 혼합기체를 셀에 넣고 CO 농도를 측정하여 검정하였으며, 실제로 응용하여 대향류 버너의 불꽃 속의 CO 농도 분포측정에 응용하였다.

• Journal of the Optical Society of Korea
• /
• 제18권6호
• /
• pp.646-649
• /
• 2014

Performances of spectrum-sliced channels are strongly affected by their relative intensity noise (RIN). We use polarization-independent optical modulators (PIOMs) for spectrum-sliced channels to suppress their RIN. The PIOM driven by a high sinusoidal voltage signal evenly redistributes optical frequency components in the spectral domain and reduces the RIN. It can be used at a broadband light source (BLS) output to produce spectrum-sliced channels having lower RIN values. Also, it can be used for each spectrum-sliced channel within each optical network unit (ONU). In our experiment, where 12.5-GHz-spaced spectrum-sliced channels are used in 1-GbE speed, the use of PIOM at the BLS output reduces the bit error rate (BER) of the spectrum-sliced channel by more than an order of magnitude. The use of PIOM within the ONU reduces the BER by approximately 3 orders of magnitude.

• ETRI Journal
• /
• 제20권1호
• /
• pp.28-36
• /
• 1998

A simple experimental method to design gain-flattened erbium-doped fiber amplifier is proposed and demonstrated based on the two linear relations between the output power and the pump power, and between the gain and the length of the eribium-doped fiber at the gain flattened state. The spectral gain variation of the eribium-doped fiber amplifiber constructed by this method was less than 0.4 dB over 12 nm (1,545~1,557nm) wavelength region. The gain flatness is also controlled within 0.4 dB over the input power range of -30~-15dBm/ch through the feedback control utilizing the amplified spontaneous emission power in the 1,530 nm region.

• 한국광학회지
• /
• 제5권2호
• /
• pp.291-297
• /
• 1994

Erbium첨가 광섬유 증폭기에서 증폭된 자연방출광(ASE) 출력의 일부를 대역투과 파장 필터를 거쳐 입력단으로 루프 귀환시켜 광증폭기를 특정 파장에서 발진시킴으로써 신호광에 대한 증폭 이득을 일정치에 고정시켰다. 증폭 이득과 ASE 출력 스펙트럼은 광증폭기가 발진하는한 입력광 power나 펌프광 power의 변화에 대하여 무관하였으며 귀환 루프의 손실에만 의존하였다. 또한 광증폭기에 저속으로 변조된 대신호가 입사하는 경우에도 이득포화에 의한 파형 왜곡없이 증폭이 가능하였다.

• Journal of the Optical Society of Korea
• /
• 제9권2호
• /
• pp.45-48
• /
• 2005

We investigate effects of the injected ASE (Amplified spontaneous emission) bandwidth on the performance of the wavelength-locked Fabry-Perot laser diodes (F-P LDs) under constant injection power density and constant injection power. For the constant injection power density, we can determine the minimum injection bandwidth by the required intensity noise or the bit-error rate (BER) performance. On the other hand, there exists the optimal ASE bandwidth for the constant injection power to minimize the intensity noise.

• Macromolecular Research
• /
• 제16권5호
• /
• pp.385-395
• /
• 2008

Synthesis and properties of novel excited-state intramolecular proton transfer (ESIPT) materials, recently developed in our group, are described. Highly efficient ESIPT reaction, achieved in polyquinolines, polybenzoxazoles, and oxadiazole and imidazole derivatives possessing an intramolecular tautomerizable hydrogen bond, has been investigated theoretically and experimentally. It is demonstrated that unique properties arising from the ESIPT process (large Stokes' shift, no self-absorption, and easy population inversion, etc.) make it possible to produce advanced polymer devices for lasing, optical storage, and electroluminescence.

• 전자공학회논문지A
• /
• 제31A권6호
• /
• pp.70-77
• /
• 1994

A low noise erbium doped fiber amplifier for optical preamplification has been demonstrated. The amplifier incoporates an optical isolator in its midway to prevent decrease of population inversion at the input port due to backward traveling amplified spontaneous emission. Then, high gain and low noise can be achieved simultaneously. A small signal gain of 34dB and a noise figure of 5.5dB have been achieved. With this amplifier, we obtained a receiver sensitivity of -39.7dBm with back to back configuration and -39.3dBm with 47km normal fiber for 10$^{-9}$BER at 2.5Gbps direct modulated optical signal.

• 전기학회논문지
• /
• 제56권11호
• /
• pp.1995-1997
• /
• 2007

In this paper we propose a wavelength-switchable fiber ring laser that employs a polarization-dependent fiber band stop filter. The fiber filter was fabricated by inscribing a long-period fiber grating on a high birefringent fiber. Dual-wavelength switching operation was accomplished by controlling the rotatable linear polarizer which rotated the polarization plane of the light circulating through the fiber laser cavity. The amplitude variation of both laser lines was measured to be less than 0.5 dB and the signal-to-amplified spontaneous emission ratio was more than 55 dB.

• ETRI Journal
• /
• 제27권4호
• /
• pp.411-417
• /
• 2005

$Pr^{3+}-doped$ selenide glass optical fiber, which guarantees single-mode propagation of above at least 1310 nm, has been successfully fabricated using a Ge-Ga-Sb-Se glass system. Thermal properties such as glass transition temperature and viscosity of the glasses have been analyzed to find optimum conditions for fiber drawing. Attenuation loss incorporating the effects of an electronic band gap transition, Rayleigh scattering, and multiphonon absorption has also been theoretically estimated for the Ge-Ga-Sb-Se fiber. A conventional double crucible technique has been applied to fabricate the selenide fiber. The background loss of the fiber was estimated to be approximately 0.64 dB/m at 1650 nm, which can be considered fairly good. When excited at approximately 1470 nm, $Pr^{3+}-doped$ selenide fiber resulted in amplified spontaneous emission and saturation behavior with increasing pump power in a U-band wavelength range of 1625 to 1675 nm.