• Journal of Korean Society on Water Environment
• /
• 제23권6호
• /
• pp.966-972
• /
• 2007

A novel organoclay has been developed with aluminium-pillared clay modified with an amphoteric surfactant, N-Dodecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate (DDAPS). This novel organoclay is expected to have phosphorus removal capacity as well as organic and inorganic contaminant removal capacity, due to aluminum inside the clay structure. It also exhibited less surfactant desorption than conventional cation surfactant-based organoclays. Phosphorus in water can be decreased from 0.2 mg/L to 0.0012 mg/L in 27 hours with this organoclay. Also, cadmium could removed from water using this proposed organo-clay. Experiments were performed under various pHs and amphoteric surfactants sorption capability was the highest at pH 5 when more of the amphoteric surfactant head group took on positive charges.

• Journal of Environmental Science International
• /
• 제9권5호
• /
• pp.403-408
• /
• 2000

On the basis of theory of Bratsch's electronegativity equalization the electronegativity equalization the group electronegativities and the group partial charges for cationic and amphoteric surface and amphoteric surfactants could be calculated using Pauling's electronegativity parameters. From calculated output we have investigated relationships between CMC(critical micelle concentration) and partial charge and group electronegativity of hydrophilic and hydrophobic groups structural stability of micelle for cationic and amphoteric surfactants. As a result CMC depends upon partial charge and electronegativity of hydrophilic group is decreased. With increasing the carbon number of hydrophilic group for cationic surfactant its partial charge is increased but CMC and its electronegativity are decreased. With increasing the carbon number of hydrophobic group for cationic and amphoteric surfactant its partial charge is increased but CMC andits electronegativity are decreased.

• Journal of the Korean Applied Science and Technology
• /
• 제33권3호
• /
• pp.449-458
• /
• 2016

Detergency and surface active properties of mixed anionic surfactants with amphoteric and nonionic were investigated. Sodium dodecyl sulfate (SDS) and ammonium dodecyl sulfate (ADS) as anionic surfactants and cocamidopropyl betaine (CAPB) as an amphoteric surfactant were used. Nonionic surfactants, which are butyl glucoside (BG), octyl glucoside (OG), decyl glucoside (DG), lauryl dimethylamine oxide (AO) and saponin were also used. To study the synergy effects of mixed SDS/ADS anionic surfactant systems, amphoteric and nonionic surfactants were added into the mixed anionic surfactants. Investigated properties of surfactant mixtures were critical micelle concentration (CMC), surface tension (${\gamma}$), wettability. In addition, based on these properties, detergency of each sample was examined. Surfactant mixtures are anionics (SDS/ADS), anionic/amphoteric/nonionic (SDS/ADS/CAPB/saponin), and anionic/nonionic (SDS/ADS/BG/saponin, SDS/ADS/OG/saponin, SDS/ADS/DG/saponin, and SDS/ADS/AO/saponin). With the addition of amphoteric and nonionic to mixed anionic surfactants, CMC and ${\gamma}$ were decreased. Addition of CAPB, which is amphoteric, showed the best property at CMC and ${\gamma}$. Furthermore, as the chain length of hydrocarbon in alkyl glucosides was increased, the CMC and ${\gamma}$ were enhanced. However, the wettability did not exactly match up with CMC and ${\gamma}$. The surfactant mixture, which contained DG, showed the best performance at wetting time. Detergency was measured at various temperatures ($15^{\circ}C$, $30^{\circ}C$, $50^{\circ}C$). The cleaning performance was enhanced by increasing washing temperature. Moreover, detergency was influenced by not only CMC and ${\gamma}$ but also wettability. Although CMC and ${\gamma}$ were not minimum at surfactant mixture that included DG, the best cleaning performance showed in that sample.

• YAKHAK HOEJI
• /
• 제11권3_4호
• /
• pp.17-21
• /
• 1967

At present, quarternary ammonium salts(cationic surfactant) and Tego compounds (amphoteric surfactant) are used as germicidal agent. In this paper, it was investigated whether their germicidal activities are influenced or not by some suspending agents which are added to them 0.005% benzalkonium chloride aq. solution and 0.05% dodecyl diaminoethyl glycine aq. solution sterilized respectively against Staphylococcus aureus and Escherichia coli within a minute. The solutions aded acacia, carboxymethyl cellulose, sodium alginate solutions to make to 0.005% to above surfactants solution decreased the germicidal activity, not being sterilized bacteria for more than 2 hours however, the solutions decreased the germicidal activity by addition of suspending agents such as acacia, carboxymethyl cellose, sodium alginate and bacteria were survival for more than 2 hrs, 0.05% of benzalkonium chloride and 0.1% dodecyl diaminoethyl glycine respectively would be sterilized within 10 minutes, when added to 5% suspending agents. This result show that bactericidal action of dodecyl diaminoethyl glycine is affected by suspending agents less than that of benzalkonium chloride.

• Macromolecular Research
• /
• 제13권5호
• /
• pp.385-390
• /
• 2005

The electrospinning process is a fascinating method to fabricate small nanosized fibers of diameter several hundred nanometers. Surfactant-polymer solutions were prepared by adding poly(vinyl alcohol) (PVOH) to distilled water with cationic, anionic, amphoteric, and non-ionic surfactants. Average diameter of the electrospun PVOH fibers prepared from PVOH solution was over 300 nm, and was decreased to 150 nm for the mixture of PVOH/amphoteric surfactant. To explain the formation of ultra fine fiber, the characteristic properties in a mixture of PVOH/surfactant such as surface tension, viscosity, and conductivity were determined. In this paper, the effect of interactions between polymers with different classes of surfactants on the morphological and mechanical properties of electrospun PVOH nonwoven mats was broadly investigated.

• Applied Chemistry for Engineering
• /
• 제23권6호
• /
• pp.521-528
• /
• 2012

In this study, we analyzed the physical properties of an ethylene oxide adducted amphoteric surfactant such as critical micelle concentration, surface tension, interfacial tension, contact angle, viscosity and phase behavior. The dual function characteristics of an amphoteric surfactant were investigated by determining an isoelectric point, which were attained using zeta potential measurements and quartz crystal microbalance (QCM) experiments. The isoelectric points of DE3-OSA82-AO, DE5-OSA82-AO and DE9-OSA82-AO surfactant systems determined by zeta potential measurements were 6.97, 6.93 and 7.10 respectively and they are in good agreement with the isoelectric point values measured by QCM experiments. The frictional property measured using an automated mildness tester showed that the DE-OSA82-AO surfactant could provide a good softening effect at neutral condition.

• Journal of the Korean Applied Science and Technology
• /
• 제26권4호
• /
• pp.422-427
• /
• 2009

We have investigated the effects of polyols and NaCl on the rheological behaviours of surfactant mixtures. Sodium lauryl ether sulfate (SLES), cocamidopropyl betaine (CAPB), disodium cocoamphodiacetate (DSCA), cocamide DEA (CDEA) and lauroyl/myristoyl DEA (LMDE) were used as surfactants. The polyols added into the surfactant mixture were 1,3-butylene glycol, propylene glycol, glycerin, sorbitol, dipropylene glycol, PEG 1500 and PEG 400. The addition of amphoteric surfactant to SLES aqueous solution lead to increase the height of foam and the viscosity of the system. The addition of nonionic surfactant, LMDE or CDEA to the SLES aqueous solution increased the viscosity and the effect of LMDE was better than that of CDEA. The effect of adding polyols and NaCl into the surfactant mixture aqueous solution lead to increase or decrease the viscosity of the systems depending on the concentration of NaCl and the kinds of polyols. These results can be explained through the salting in or salting out of surfactant of the systems.

• Transactions on Semiconductor Engineering
• /
• 제2권2호
• /
• pp.1-9
• /
• 2024

CMP (Chemical Mechanical Polishing) processes have become essential for creating multilayered component structures in semiconductor manufacturing. Typically, the slurry composition in CMP processes involves a balance of three components such as ceria, dispersant, and deionized water. In this study, we conducted research on the stability of ceria slurries using an amphoteric surfactant with controlled concentrations of AMP (2-Amino-2-methyl-1-propanol). The results indicated pH stabilization influenced by carboxylic (-COOH) groups depending on the AMP concentration. Additionally, there was no occurrence of aggregation in the ceria slurry, confirming the absence of dispersion stability issues.

• Journal of the Korean Applied Science and Technology
• /
• 제12권1호
• /
• pp.47-54
• /
• 1995

Water pollution, which is caused by surfactants, is increased by insolubility and excessive uses of detergents. The detergency properties of nine kinds of amphoteric surfactants derived from imidazoline were investigated and compared with sodium lauryl sulfats(SLS) of petrochemical surfactant by using detergent formulations. Several physico-chemical properties were measured to investigate the effective factors on detergency. From the comparision of these compounds with SLS, it was found that 1-(2-hydroxyethyl)-1- (3-sulfonatedpropyl)-2-undecyl-2-imidazolinum [IV] has the most outstnading characteristics of detergency and various fundamental properties. Therefore, this result is expected to do its environmental stability as a nonpolluting detergent. Detergency process of surfactants were discussed in relation to physico-chemical treatments. Performance improvement on detergency is made work of adhesion to soil as small as possible. Therefore these results show that contamination is easily removed and industrial applications may be respected.

• Journal of the Korean Applied Science and Technology
• /
• 제11권2호
• /
• pp.121-127
• /
• 1994

1-(2-hydroxyethyl)-2-undecyl-2-imidazoline[I] was converted into various types of sulfonated or sulfated amphoteric surfactants as following. 1-(2-hydroxyethyl)-1-(3-sulfonatedpropyl)-2-undecyl-2-imidazolium[III] 1-(2-sulfatedethyl)-1-methyl-2-undecyl-2-imidazolium[IV] 1-dioxylethylene methyl sulfonated-1-methyl-2-undecyl-2-imidazoliun[V] N-[N'-(2-hydroxyethyl)-N-(3-sulfonatedpropylammonio]ethyl dodecanoyl amide[VI] Mono sodium N-[N'-(2-hydroxyethyl)-N'-disulfonatedpropylammonio]ethyl dodecanoyl amide[VII] N-[N'-(2-hydroxyethyl-N'-(2-hydroxypropl-N'(3-sulfonatedpropyl)ammonio] ethyl dodecanoyl amide[VIII] The alkylimidazolines could be readily hydrolyzed to give amidoamines, but by quaternerization, hydrolysis stability of imidazoline and amide type amphoteric surfactantes were increased in the alkali and acid conditions. Also, at least three carbon chains introduce to the main group, water solubility was sparingly increased.