• 제목/요약/키워드: amount of water vapor

검색결과 157건 처리시간 0.025초

ESTIMATING NEAR REAL TIME PRECIPITABLE WATER FROM SHORT BASELINE GPS OBSERVATIONS

  • Yang, Den-Ring;Liou, Yuei-An;Tseng, Pei-Li
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
    • /
    • pp.410-413
    • /
    • 2007
  • Water vapor in the atmosphere is an influential factor of the hydrosphere cycle, which exchanges heat through phase change and is essential to precipitation. Because of its significance in altering weather, the estimation of water vapor amount and distribution is crucial to determine the precision of the weather forecasting and the understanding of regional/local climate. It is shown that it is reliable to measure precipitable water (PW) using long baseline (500-2000km) GPS observations. However, it becomes infeasible to derive absolute PW from GPS observations in Taiwan due to geometric limitation of relatively short-baseline network. In this study, a method of deriving Near-Real-Time PW from short baseline GPS observations is proposed. This method uses a reference station to derive a regression model for wet delay, and to interpolate the difference of wet delay among stations. Then, the precipitable water is obtained by using a conversion factor derived from radiosondes. The method has been tested by using the reference station located on Mt. Ho-Hwan with eleven stations around Taiwan. The result indicates that short baseline GPS observations can be used to precisely estimate the precipitable water in near-real-time.

  • PDF

The Effect of Clay Concentration on Mechanical and Water Barrier Properties of Chitosan-Based Nanocomposite Films

  • Rhim, Jong-Whan
    • Food Science and Biotechnology
    • /
    • 제15권6호
    • /
    • pp.925-930
    • /
    • 2006
  • Chitosan-based nanocomposite films were prepared using a solution intercalation method incorporating varying amounts of organically modified montmorillonite (Cloisite 30B) from 0 to 30 wt%. The nanocomposite films prepared were optically clear despite a slight decrease in the transmittance due to the spatial distribution of nanoclay. X-ray diffraction patterns indicated that a certain degree of intercalation or exfoliation formed when the amount of clay in the film was low and that microscale tactoids formed when the clay content in the sample was high (more than 10 wt%). The tensile strength (TS) of the chitosan film increased when the clay was incorporated up to 10 wt% and then decreased with further increases in the clay content of the film. The elongation at break (E) increased slightly upon the addition of low levels of clay up to 5 wt% and then decreased with further increases in the amount of the clay in the film. The water vapor permeability (WVP) decreased exponentially with increasing clay content. The water solubility (WS) and swelling ratio (SR) of the nanocomposite films decreased slightly, indicating that the water resistance of the chitosan film increased due to the incorporation of the nanoclay.

기압의 역해면 경정 보정을 이용한 GPS PWV 복원 능력 개선 (Improvement of GPS PWV retrieval capability using the reverse sea level corrections of air-pressure)

  • 송동섭
    • 한국측량학회지
    • /
    • 제27권5호
    • /
    • pp.535-544
    • /
    • 2009
  • GPS 위성으로부터의 신호는 위성과 지상의 수신기 사이의 경로에 걸쳐서 누적된 양의 수증기나 가강수량으로 복원하기 위해 이용되고 있다. GPS 위성 신호의 대류권 지연으로부터 가강수량으로 복원하기 위해서는 대류권의 총 지연량으로부터 실제 습윤 지연량을 계산하기 위하여 표면 기압 관측을 통해 결정된 실제 건조 지연량의 계산이 필요하다. 그러나 기압 정보를 얻기 위한 기압계가 모든 GPS 상시관측소와 동일한 지점에 위치하고 있지 않기 때문에 지상 기상 관측소로부터 획득한 해면 경정된 기압 정보를 이용하곤 한다. 이러한 기압의 직접 이용은 GPS를 이용한 수증기 복원 능력을 저하시키는 원인이 된다. 본 연구에서는 우리나라에 적합한 기압의 역해면 경정 보정 방안을 제시하고 이를 이용한 GPS 수증기의 정확도를 레디오존데 PWV와 평가하고 GPS로 추정한 수증기의 복원 능력의 개선 방안을 제시하였다.

Temperature Analysis for Optimizing the Configuration of the Linear Cell

  • Choi Jong-Wook;Kim Sung-Cho;Kim Jeong-Soo
    • Journal of Mechanical Science and Technology
    • /
    • 제20권7호
    • /
    • pp.1089-1097
    • /
    • 2006
  • The market demand of display devices is drastically increasing in the information technology age. The research on OLED (Organic Light Emitting Diodes) display with the luminescence in itself is being more paid attention than LCD (Liquid Crystal display) with the light source from the back. The vapor deposition process is most essential in manufacturing OLED display. The temperature distribution of the linear cell in this process is closely related to securing the uniformity of organic materials on the substrate. This work analyzed the temperature distribution depending on the intervals between the crucible and the heating band as well as on the amount of the heat flux from the heating band. Moreover, the roles of the water jacket and the configuration of the cover within the linear cell were examined through the temperature analysis for six configurations of the linear cell. Under the above temperature analysis, the variations in the intervals and the amount of the heat flux were considered to have an effect on building the uniform temperature distribution within the crucible. It is predicted that the water jacket and the adequate configuration of the cover will prevent the blowout and clogging phenomena, respectively. The results can be used as the fundamental data for designing the optimal linear cell.

UV-Induced Graft Polymerization of Polypropylene-g-glycidyl methacrylate Membrane in the Vapor Phase

  • Hwang, Taek-Sung;Park, Jin-Won
    • Macromolecular Research
    • /
    • 제11권6호
    • /
    • pp.495-500
    • /
    • 2003
  • UV-induced graft polymerization of glycidyl methacrylate (GMA) to a polypropylene (PP) membrane was carried out in the vapor phase with benzophenone (BP) as a photoinitiator. Attenuated total reflection Fourier transform infrared spectroscopy, atomic force microscopy (AFM), and scanning electron microscopy (SEM) were utilized to characterize the copolymer. The degree of grafting increased with increasing reaction time, increased UV irradiation source intensity, and increased immersion concentration of the BP solution. The optimum synthetic condition for the PP-g-GMA membrane was obtained with a reaction time of 2 hrs, a UV irradiation source intensity of 450 W, and an immersion concentration of the BP solution of 0.5 mol/L. The pure water flux decreased upon increasing the degree of grafting and increasing the amount of diethylamino functional group introduced. The analysis of AFM and SEM images shows that the graft chains and diethylamino groups of PP-g-GMA grew on the PP membrane surface, resulting in a change in surface morphology.

Quantitative Vapor Phase Exciplex Fluorescence Measurements at High Ambient Temperature and Pressure

  • Kim, Tongwoo;Jaal B. Ghandhi
    • Journal of Mechanical Science and Technology
    • /
    • 제17권1호
    • /
    • pp.157-167
    • /
    • 2003
  • The exciplex fluorescence technique with the TMPD (tetamethyl-Ρ-phenylene-diamine) / naphthalene dopant system was applied in a combustion-type constant-volume spray chamber. A detailed set of calibration experiments has been performed in order to quantify the TMPD fluorescence signal. It has been demonstrated that the TMPD fluorescence intensity was directly proportional to concentration, was independent of the chamber pressure, and was not sensitive to quenching by either water vapor or carbon dioxide. Using a dual heated-jet experiment, the temperature dependence of TMPD fluorescence up to 1000 K was measured. The temperature field in the spray images was determined using a simple mixing model, and an iterative solution method was used to determine the concentration and temperature field including the additional effects of the laser sheet extinction. The integrated fuel vapor concentration compared favorably with the measured amount of injected fuel when all of the liquid fuel had evaporated.

주변공기조건이 충돌수분류에 의한 고온강판의 냉각에 미치는 영향 연구 (The Effect of Ambient Air Condition on a Hot Steel Plate Cooled by Impinging Water Jet)

  • 이필종;최해원;이승홍
    • 대한기계학회논문집B
    • /
    • 제24권1호
    • /
    • pp.29-38
    • /
    • 2000
  • It is observed that the cooling capacity of impinging water jet is affected by the seasonal conditions in steel manufacturing process with large scale. To confirm this phenomena, the cooling experiments of a hot steel plate by a laminar jet were conducted for two different initial ambient air temperature($10^{\circ}C$ and $40^{\circ}C$) in a closed chamber, and an inverse heat conduction method is applied for the quantitative comparison. It is found that the cooling capacity under $10^{\circ}C$ air temperature is lower than that under $40^{\circ}C$, as is the saturated water vapor is more easily observed, and the amount of total extracted heat in the case of $10^{\circ}C$ is smaller by nearly 15% than that of $40^{\circ}C$ case. From these results, it is thought that the quantity of water vapor, which could be absorbed until saturation, effects on the mechanism of boiling heat transfer.

알칼리성 용해제의 조습특성에 관한 연구 (A Study on Humid Control Characteristics of Alkaline Desiccants)

  • 홍영호
    • 공업화학
    • /
    • 제21권2호
    • /
    • pp.169-173
    • /
    • 2010
  • 다양한 형태의 염들이 수분 제거능력을 지니고 있다. 이러한 수분의 제거 능력은 함습기체의 온도와 공급된 유량에 따라 결정된다. 본 연구에서는 용해성 건조제를 사용하는 제습공정에 유입되는 공기의 유량과 온도, 그리고 용해성 건조제의 양이 제습특성에 미치는 영향에 대한 연구를 수행하였다. 사용된 용해성 건조제는 수용성 공정에서 나트륨(Na) 또는 칼륨(K)이 주성분이 되도록 합성하고 제습특성에 대하여 검토하였다. 연구 결과 다음과 같은 몇 가지 결론을 얻을 수 있었다. 용해성 건조제의 주성분에 관계없이 열적 특성은 유사한 결과를 보여주고 있다. 습도가 70~93%이고 공기의 유량이 $0.22{\sim}0.69m^3/s$인 조건에서 Na가 주성분인 용해성 건조제가 제습공정에 효율적이었다. 또한 이슬점은 공기의 유입량에 따라 증가하였으며, 제습공정에서 상대습도의 변화는 용해성 건조제의 양에 비례하는 결과를 보였다.

득량만일원의 국지기상 환경의 특성에 관한 연구 (A Study on the Local Climate in the Vicinity of Duckyang Bay , Korea)

  • 김유근
    • 수산해양기술연구
    • /
    • 제28권4호
    • /
    • pp.398-411
    • /
    • 1992
  • The characteristics of local climate in the vicinity of Duckyang Bay have been investigated with the analysis of the surface observation data of Gohug District and the aerological data of Kwangju. In principal features of local climate, the annual range in temperature appeared identical with the mean value(24~$25^{\circ}C$) of the south coastal area, and evaporation from April to September was likely less than precipitation. The average speed of surface wind in Summer seemed higher than in other seasons on account of wea breeze. Relative humidity was 74%, annual average. In the mean cloud cover Summer(6.4) showed greater deal of amount than Winter(4.2). Duration of sunshine was the longest in May(268.4hrs), while the shortest in February(188.4hrs). The amount of the precipitable water was the greatest in July, whereas the least in January, and in Summer the greatest, in Autumn the second greatest, and in Spring the third greatest, and in Winter the least in consideration of seasonal orders. The Summer deviation was most remarkable around all sides. The direction of vector wind appeared the most changeable on the earth surface. At an altitude of 300mb all the winds blew west around all months. Moreover, water vapor transport was measured to be the greatest in Summer; while the least in Winter. So was the deviation of water vapor transport. And lastly frequency of occurrence of days in which a little cloud appeared(less than 5/10) was high except for Summer, when northerly winds blew; while frequency of occurrence of day plenty of clouds floated was outstandingly high at the time of strong southerly winds.

  • PDF

해수면온도의 ANOMALY에 상응하는 위성관측자료로부터 도출한 열대수증기 RESPONSE (Tropical Misture Response Derived from Satellite Observations Corresponding to Sea Surface Temperature Anomaly)

  • Hyo-Sang Chung
    • International Union of Geodesy and Geophysics Korean Journal of Geophysical Research
    • /
    • 제21권1호
    • /
    • pp.47-54
    • /
    • 1993
  • 해수면 온도의 positive anomaly가 주로 나타나는 구역은 대기중 습기 유입이 많은 구역분만 아니라 아열대 지역의 하강 운동이 일어나는 구역의 부근에서도 나타난다. 대기중 수증기의 유입은 SST anomaly에 따라 많아지기 때문에 해수면 온도의 증가는 대기를 불안정하게 하며 습윤 공기의 발달을 촉진하는 습윤 단열한 불안정상태를 초래한다. 태평양상에서 4.0K 의SST 변화는 동태평양과 중앙태평양상에서 TOVS 수증기 채널들에 의해 관측된 휘도 온도의 10.0 K 만큰의 양의 차이를 보였으며, 적도를 따라 남태평양상의 남동쪽과 남쪽으로는 휘도 온도가 7.5 K 만큼 음의 차이를 보였다. 엘니뇨와 비엘리뇨 기간을 비교하면 중대류권 고도에서 수증기 분포를 나타내는 TOVS 적외선 채널 $11(7.3{\mu}m)$$12(6.7{\mu}m)$의 휘도 온도 차이는 태평양상에서 습윤 공기와 관련한 전대류권 순환과 역학 과정에서 현저한 차이가 있었음을 알 수 있다.

  • PDF