• 설비공학논문집
• /
• 제18권10호
• /
• pp.768-775
• /
• 2006

The water supply system has been designing by decision process such as calculation of water supply amount, capacity of water tanks and pumps, pipe size. Especially, when we estimate excessively water supply amount, the initial cost and running cost will increase according to enlargement of the water tank and pump capacity, and water quality of ground water tank can become worse. Therefore, calculation of water supply amount is basically most important factor. In order to calculate exactly water supply amount applying domestic real situation, we should set up basic data as well as study calculation methods. This research would consider calculation methods of water supply amount for school building through examine domestic and foreign basic data of water supply amount and characteristics of domestic school, and estimate daily water supply in high school.

• 설비공학논문집
• /
• 제11권6호
• /
• pp.758-765
• /
• 1999

The estimation of reasonable amount of domestic cold water and hot water supplies in apartment houses is very important for the economical design of domestic cold water and hot water supply system which include pumps, boilers, heat exchangers, and various water reservoirs. To suggest the model of predicting reasonable amount of domestic cold water and hot water supplies, residents and actual domestic cold water and hot water consumption have been investigated for 740 apartment houses in Seoul and Bun-Dang, Kyunggi-Do. The model is suggested as a function of exclusive area of the apartment house and results of the model show generally good agreement with published data.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2001년도 추계학술대회
• /
• pp.193-202
• /
• 2001

The individual rotten water purification tank recently discharges wastewater and sewage through the outlet without purification ability. The outlet water and affiliated water purification tank with microorganism cultivator tank cultivates microorganism and then drops the value BOD, COD of sewage and discharges the quality of water into the outlet. The blower and water pump operating continuously prompts the waste of energy and deterioration of equipment. Each room of deposition tank, foaming tank, microorganism cultivator tank is equipment with the sludge detection senses so it can detect the density of each room. The power-drive plant of the blower and water pump which ate the system cultivating the microorganism must be made as fuzzy controlization (If the sludge amount of each room become higher, the rate of operation of blower and water pump must heighten, on the contrary, in case of row sludge amount, the total handling amount and microorganism handling amount of each room of control. Tank reducing the rate of operation must be DB. At present, the blower amount in proportion to the sludge and oxygen demanding amount has to control. Each mom must be checked outlet level of the outlet, also each room must flow backward discharge materials, and must operate feed-back control until we want to be come as a below value of BOD/COD(10PPM ; KS).

• 대한안전경영과학회지
• /
• 제3권4호
• /
• pp.53-63
• /
• 2001

The individual rotten water purification tank recently discharges wastewater and sewage through the outlet without purification ability. The outlet water and affiliated water purification tank with microorganism cultivator tank cultivates microorganism and then drops the value BOD, COD of sewage and discharges the quality of water into the outlet. The blower and water pump operating continuously prompts the waste of energy and deterioration of equipment. Each room of deposition tank, foaming tank, microorganism cultivator tank is equipment with the sludge detection senses so it can detect the density of each room. The power-drive plant of the blower and water pump which are the system cultivating the microorganism must be made as fuzzy controlization (If the sludge amount of each room become higher, the rate of operation of blower and water pump must heighten, on the contrary, in case of row sludge amount, the total handling amount and microorganism handling amount of each room of control. Tank reducing the rate of operation must be DB. At present, the blower amount in proportion to the sludge and oxyzen demanding amount has to control. Each room mus be checked outlet level of the outlet, also each room must flow backward discharge materials, and must operate feed-back control until we want to be come as a below value of BOD/COD(10PPM ; KS).

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.260-264
• /
• 2005

Effective use of water resources has become a social problem because the deficit of water comes from population growth and Industrial development. Therefore, the conjunctive operation of surface water and groundwater will become an alternative. Groundwater has many advantages for the evaporation and effect of rainfall compared with surface water. Although the available amount of groundwater is small, groundwater dam can be used complementarily because of the sustainable supply of water. A calculating technique of the optimal amount of water resources by the groundwater dam was developed. A pilot site was selected to assess the optial amount of groungwater for the designed groungwater dam. If the developed technique is more refined by the measured data, the groundwater dam will become a good alternative to develope the water resources in the water deficit area.

• 한국산림과학회지
• /
• 제89권3호
• /
• pp.297-305
• /
• 2000

이 연구는 북한산국립공원(北漢山國立公圓) 북동사면(北東斜面) 일대(一帶) 계류수질(溪流水質) 오염(汚染)에 영향(影響)하는 인자(因子)를 파악함으로써 국립공원내 계류수질 보전을 위한 과학적 기초 자료를 제공하기 위하여 1998년 7월부터 1999년 11월까지 수행하였다. 계류수질오염(溪流水質汚染)을 판단하는 지표(指標)인 전기전도도(電氣傳導度)의 설명에 유의한 영향을 미치는 인자는 탐방객수와 $Cl^-$ 점유비 등 2개 인자로 5% 수준에서 유의하여 북한산국립공원을 이용하는 탐방객수(探訪客數)의 증가(增加)는 계류수의 전기전도도(電氣傳導度)를 상승시켜 계류수질(溪流水質) 오염(汚染)에 영향(影響)을 미치는 것으로 분석(分析)되었다. 다중회귀분석결과 용존산소포화도의 설명에 유의한 영향을 미치는 인자는 용존산소량과 수온 등 2개 인자로 1% 수준에서 유의하였다. $Cl^-$의 설명에 유의한 영향을 미치는 인자는 전기전도도, $K^+$, $Na^+$, $SO_4{^{2-}}$, 이온총량, $Cl^-$점유비, $SO_4{^{2-}}$점유비 등 7개 인자로 5%, 1% 수준에서 유의하였다. 또한, $NO_3{^-}$의 설명에 유의한 영향을 미치는 인자는 $Na^+$, $Ca^{2+}$, $SO_4{^{2-}}$, $Cl^-$점유비, $NO_3{^-}$점유비 등 5개 인자로 5%, 1% 수준에서 유의하였으며, $SO_4{^{2-}}$의 설명에 유의한 영향을 미치는 인자는 $NO_3{^-}$, 이온총량 등 2개 인자로 5% 수준에서 유의하였다.

• 한국주거학회논문집
• /
• 제11권3호
• /
• pp.125-136
• /
• 2000

The purpose of this study was to analyze water consumption in each apartment buildings influenced by several factors that are the income level of inhabitants, life style, the area apartments and climate. The automation of sanitary machines or facilities in recently built apartments has caused largely increases in amount of water consumption. Therefore, the design for water supply is very important for the maintenance of the optimum level or pressure of water supply. This study is based on the offer of basic data for improving the quality of water supply and employing the sanitary machines or sanitary facilities by analysis of amount increased of water consumption rapidly. Amount of water consumption data, the change in quality of entropy to the supply water pipe was analyzed and presented to indicate the necessary to basic materials for the design of an optimal water pipe.

• 한국환경보건학회지
• /
• 제22권2호
• /
• pp.124-129
• /
• 1996

In order to investigate the deposition chara.cteristics of water-soluble ionic components in dustfall in Kwangju city, dustfall samples were collected by deposit jar for one year from December 1992 to November 1993. The depositjon amount of dustfall and water-soluble ionic components ($SO_4^{2-}, NO_3^-, Cl^-, NH_4^+, Na^+, Ca^{2+}, Mg^{2+}, K^+$) were measured. The total deposition amount of dustfall was 10.0 ton/$km^2$/month and showed seasonal trend of Summer and Spring > Fall and Winter. The total deposition amounts of water-soluble components showed 2.41 ton/$km^2$/month and seasonal trend of Summer > Fall > Spring > Winter. Deposition amount of $SO_4^{2-}$ was 0.99 ton/$km^2$/month which makes up 41% of water-soluble components. The deposition amounts of dustfall and watersoluble components according to the sampling points were approximately similar to each other. From this result, it can be estimated that the deposition amounts of dustfall and water-soluble components in dustfall were more influenced by the seasonal variation than the regional emission characteristics of pollution source. The content of each ionic component to the deposition amount of water-soluble components showed in order of $SO_4^{2-} > Cl^- > NH_4^+ > Na^+ > Ca^{2+} = K^+ > NO_3^- > Mg^{2+}$ respectively.

• 신재생에너지
• /
• 제7권4호
• /
• pp.30-36
• /
• 2011

The objective of this study is to investigate the effects of the refrigerant charge amount on the performance of a water-to-water ground source heat pump with a variation of compressor speed and the secondary fluid flow rate. The water-to-water ground source heat pump was tested by varying refrigerant charge amount from -40% to 20% of full charge. Compressor speed was changed from 30 Hz to 75 Hz and the secondary fluid flow rate was adjusted from 6 LPM to 14 LPM. For all test conditions, EWTs of an indoor heat exchanger and an outdoor heat exchanger were maintained at standard conditions of ISO 13256-2. The slope of the COP with the variation of charge amount is much steeper at undercharged conditions than that at overcharged conditions. For all compressor speed, the variation of the system performance according to charge amounts showed the similar trends. However, the optimum charge amount of the system increased a little with an increment of compressor speed. When the secondary fluid flow rate decreased, the system was optimized at higher refrigerant charge amount conditions.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.143.1-143.1
• /
• 2011

The objective of this study is to investigate the effects of the refrigerant charge amount on the performance of a water-to-water ground source heat pump with a variation of compressor speed and the secondary fluid flow rate. The water-to-water ground source heat pump was tested by varying refrigerant charge amount from -40% to 20% of full charge. Compressor speed was changed from 30 Hz to 75 Hz, and the secondary fluid flow rate was adjusted from 6 LPM to 14 LPM. For all test conditions, EWT of an indoor heat exchanger and an outdoor heat exchanger were maintained at standard conditions of ISO 13256-2. The slope of the COP with the variation of charge amount is much steeper at undercharged conditions than that at overcharged conditions. For all compressor speed, the variation of the system performance according to charge amounts showed the similar trends. However, the optimum charge amount of the system increased a little with an increment of compressor speed. When the secondary fluid flow rate decreased, the system optimized at higher refrigerant charge amount conditions.