• Journal of Sericultural and Entomological Science
• /
• v.39 no.1
• /
• pp.44-55
• /
• 1997

This study was carried out to find out the relationship between qualities and contraction phenomenon of silk fibers by treatment of concentrated neutral salts. The contraction effects of silk fibers showed the critical point on the treatment conditions of concentration, temperature and time, among three kinds of neutral salts such as calcium nitrate, calcium chloride and lithium bromide. But, The silk fibers, pretreated with bromide and/or formaldehyde, did not show the contraction upon treating with calcium nitrate. This indicates that tyrosine and serine can be correlated with the contraction reaction because of coupling these amino acids with bromide and formaldehyde. In conclusion, a mechanism for the contraction of silk fiber with highly concentrated calcium nitrate solution is supposed as follows. At the initial stage of ration, the water was penetrated into the amorphous regions and fibers swollen, therefore, the contraction took place mainly in amorphous regions, which have plenty of functional groups with hydroxyl residues. Then, as the calcium nitrate is penetrated into the microfibril, the gydrogen bonds of tyrosine and serine residues and broken and crystalline regions are more and more influenced by increasing concentration of calcium nitrate solution. Microgibrils of crystalline regions become entangled, contracted to linear direction and rearranged to form new stable hydrogen bonds.

• Rapid Communication in Photoscience
• /
• v.4 no.2
• /
• pp.34-36
• /
• 2015

New spectroscopic characteristics of amorphous ferric hydroxide ($Fe(OH)_3$), interestingly in the near infrared (NIR) region, are presented in this study. The absorption spectrum of ferric hydroxide covers wide spectral regions from ultraviolet to NIR (200~900 nm). Unique emission bands were newly observed in the NIR regions (800~1400 nm). Several bands of this NIR emission are quiet well overlapped with the combinational vibrational absorption bands of water. From photothermal conversion study, very interestingly, temperature of aqueous mixture solution including the amorphous ferric hydroxide was significantly increased from ambient temperature to $38^{\circ}C$ for 30 minutes under irradiation of a standard helium lamp.

• Fibers and Polymers
• /
• v.5 no.3
• /
• pp.225-229
• /
• 2004

The effect of UV and $^60{Co}$ gamma radiations on the physical and mechanical properties of nylon 6 mono-filaments with different draw ratios has been studied. Specimens were exposed to either up to 25 Mrad of gamma or up to 168 hrs of intense UV irradiation. The results show that nylon mono-filaments exposed to gamma rays, with much higher quantum energy than UV, undergo a larger extent of molecular chain scission. Higher irradiation dose also results in the production of insoluble, macroscopic three-dimensional cross-linked network structure. The amorphous regions with a lower density of cohesive energy (lower molecular orientation) show a higher extent of cross linking reaction whereas amorphous regions with a higher density of cohesive energy (higher orientation) show higher extent of chain scission reaction, irrespective of UV ray or gamma ray irradiation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.31-34
• /
• 1997

A reversible scalar phenomena in amorphous As$_{40}$ Ge$_{10}$ Se$_{15}$ S$_{35}$ have been investigated by blue-pass-filtered Hg lamp and He-Ne laser. Annealing causes the shift of the absorption edge to shelter wavelengths approximately 0.17ev, also illumination moves it to longer wavelengths about 0.05 ~ 0.07eV and it increases the refractive index maximum 0.3. Therefore the thermalbleaching(TB) and photodarkening(PD) effects have been understood by the results related to optical absorption characteristics. TB could be estimated as increasing the stabilization of amorphous chalcogenide films since absorption slope of extended regions(U) was not changed by annealing. On the other hand, PD could be understood as due to the enhancement of disorder since the slope of Urbach’s tail(1/F) around an absorption edge were decreased by illumination.ion.n.

• Journal of Korean Vacuum Science & Technology
• /
• v.2 no.2
• /
• pp.97-100
• /
• 1998

We have investigated the effects of crystalline activation on solid phase crystallization (SPC) of amorphous silicon (a-Si) thin films. Wet blasting and self ion implantation were employed as the activation treatments to induce macro or micro crystalline damages on deposited a-Si films. Low temperature and larger grain crystallization were obtained by the applied two-step activation. High degree of crystallinity was also observed on both furnace and rapid SPC. crystalline activations showed the promotion of nucleation on the activated regions and the retardation of growth in an amorphous matrix in SPC. The observed behavior of two-step SPC was strongly dependent on the applied activation and annealing processes. It was also found that the diversified effects by macro and micro activations on the SPC were virtually diminished as the annealing temperature increased.

• Journal of Korea Foundry Society
• /
• v.36 no.1
• /
• pp.18-23
• /
• 2016

Iron based amorphous ribbons with the nominal compositions of $(Fe_{79}C_{11}B_8Si_2)_{100-X}Cr_X$ (X = 0,2,4,6,8 at%) have been developed as reinforcements that can be applied to the concrete materials. Mechanical properties and glass forming ability of the ribbons can be enhanced by the optimum amounts of Cr additions that can also improve corrosion properties of the ribbons. Vein patterns typical of the fractured surface morphology of amorphous alloys have been observed on the surfaces of ribbons after tensile tests. It is inferred from the EDS analysis results of vein patterns that carbon segregations occur within the narrow shear band regions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1990.10a
• /
• pp.98-101
• /
• 1990

In order to investigate the laser effects resulted from the behaviors of carriers for BOPP film, experiment of TSC were carried out on the specimen with 15[$\mu\textrm{m}$] thick irradiated by He-Ne laser. The TSC spectras were observed in the temperature range of -100[$^{\circ}C$] to 130[$^{\circ}C$] with the electric field of 20∼60[MV/m], had show four of the distinguished peak such as ${\alpha}$$_1$, ${\alpha}$$_2$, ${\beta}$ and ${\gamma}$, which appeared at 115, 80, 17 and -30[$^{\circ}C$] respectively. Specially, ${\alpha}$$_1$ was observed and anomalous TSC flowing in the same direction as the charging current on the high-electric field such as 50∼60[MV/m]. In according on the consequences obtained from the studies, the origin of ${\alpha}$$_1$peak was attributed to the detrapping process form trap with 2.88[eV] deep of injected space charge from the chathode in the crystaline regions. The origin of ${\alpha}$$_2$ peak was regarded as the detrapping process of ions trapped with 0.9[eV] deep originated from impurity-ion remained in the specimen during production process of the material, in the crystalline regions. The origin of ${\beta}$ peak was concluded to be due to the depolarization process of "C=0"dipole with the activation energy of 0.75[eV] in the amorphous regions. The origin of ${\gamma}$ peak was responsible to the process combined with the depolarization of "CH$_3$", chain segment, with the activation energy of carriers from the shallow trap with 0.4[eV], in he amorphous regions.

• Korean Journal of Metals and Materials
• /
• v.48 no.1
• /
• pp.1-7
• /
• 2010

Experiments have demonstrated that the addition of a moderate amount of V to $Fe_{52}Co_{(20-x)}B_{20}Si_4Nb_4V_x$ amorphous alloy enhances the plasticity of the alloy. In particular, $Fe_{52}Co_{17.5}B_{20}Si_4Nb_4V_{2.5}$ alloy withstood a maximum of 8.3% strain prior to fracture along with a strength exceeding 4.7 GPa. Energy dispersive x-ray spectroscopy conducted on the $Fe_{52}Co_{17.5}B_{20}Si_4Nb_4V_{2.5}$ alloy exhibited evidence of compositional modulation, indicating that nm-scale phase separation had occurred at local regions. In this study, the role played by nm-scale phase separation on the plasticity was investigated in terms of structural disordering and shear localization in order to better understand the structural origin of the enhanced plasticity shown by the developed alloy.

• Korean Journal of Metals and Materials
• /
• v.47 no.11
• /
• pp.687-693
• /
• 2009

Experiments have demonstrated that a moderate amount of Be added to $Zr_{57.5}Cu_{38.3}Al_{4.2}$ amorphous alloy enhances the plasticity of the alloy. In particular, $Zr_{54}Cu_{36}Al_{4}Be_{6}$ alloy exhibited 19% of strain to fracture along with a strength exceeding 2 GPa. Energy dispersive x-ray spectroscopy conducted on the $Zr_{54}Cu_{36}Al_{4}Be_{6}$ alloy exhibited the presence of compositional modulation, indicating that nm-scale phase separation had occurred at local regions. In this study, the role played by the nm-scale phase separation on the plasticity was investigated in terms of structural disordering, structural softening and shear localization in order to better understand the structural origin of the enhanced plasticity shown by the developed alloy.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.3
• /
• pp.294-301
• /
• 1988

A study on the lattice damages and impurity depth profiles have been performed with BF2 ion implanted silicon materials. Electrical measurement, SIMS and TEM analysis techniques were used in order to identify the reverse annealing phenomena, impurity depth profiles and lattice damages. A typical reverse annealing phenomena were shown at the dose of 1x10**15/cm\ulcorner and non-reverse annealing at the dose of 5x10**15/cm\ulcorner This was explained with the formation of the amorphous region at BF2+ ion implantation with high dose. That is, the amorphous reigons were recrystallized centrated at certain regions were measured by SIMS technique. The dislocation loops-like crystalline defects were observed with TEM cross sections, which were formed at the lattice damaged region during annealing process.