• Journal of the Semiconductor & Display Technology
• /
• v.8 no.1
• /
• pp.13-17
• /
• 2009

In PRAM applications, the devices can be made for both binary and multi-state storage. The ability to attain intermediate stages comes either from the fact that some chalcogenide materials can exist in configurations that range from completely amorphous to completely crystalline or from designing device structure such a way that mimics multiple phase chase phenomena in single cell. We have designed stack-structured phase change memory cell which operates as multi-state storage. Amorphous $Ge_xTe_{100-x}$ chalcogenide materials were stacked and a diffusion barrier was chosen for each stack layers. The device is operated by crystallizing each chalcogenide material as sequential manner from the bottom layer to the top layer. The amplitude of current pulse and the duration of pulse width was fixed and number of pulses were controlled to change overall resistance of the phase change memory cell. To optimize operational performance the thickness of each chalcogenide was controlled based on simulation results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05a
• /
• pp.92-95
• /
• 2005

The silver photodoping effect in amorphous AsGeSeS chalcogenide thin films for holographic recording has been investigated using a HeNe laser ($\lambda$=632.8 nm). The chalcogenide films prepared in this work were thinner in comparison with the penetration depth of recording light ($d_p$=1.66 mm). The variation of the diffraction efficiency $(\eta)$ in amorphous chalcogende films exhibits a tendency, independently of the Ag photodoping. That is, n increases relatively rapidly at the beginning of the recording process, reaches the maximum $({\eta}_{max})$ and slowly decreases. In addition, the value of ${\eta}_{max}$ depends strongly on chalcogenide film thickness(d) and its peak among the films with d = 40, 80, 150, 300, and 633 nm is observed at d = 150 nm (approximately 1/2n), where n is refractive index of the chalcogenide (n=2.0). The ${\eta}$ is largely enhanced by Ag photodoping into the chalcogenides. In particular, the value of hmax in a bilayer of 10-nm-thick Ag/150-nm-thick AsGeSeS film is about 1.6%, which corresponds to ~20 times in comparison with that of the AsGeSeS film (without Ag).

• Journal of the Korean Ceramic Society
• /
• v.52 no.2
• /
• pp.108-113
• /
• 2015

In an effort to evaluate the practicability of an imprinting technique for amorphous chalcogenide film in Ge-based compositions, we investigate the deformation behavior of the surface of amorphous $GeSe_2$ film deposited via a thermal evaporation route according to varying static loads applied at elevated temperatures. We observe that, under these static loading conditions, crystallization tends to occur on its surface relatively more easily than in As-based $As_2Se_3$ films. As for the present $GeSe_2$ film, higher processing temperatures are required in order to make its surface reflect the given stamp patterns well; however, in this case, its surface becomes partially crystallized in the monoclinic $GeSe_2$ phase. The increased vulnerability of this amorphous $GeSe_2$ film toward surface crystallization under static loading, when compared with the $As_2Se_3$ counterpart, is explained in terms of the topological aspects of its amorphous structure.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.24-24
• /
• 2007

We have demonstrated new functionalities of Ag doped chalcogenide glasses based on their capabilities as solid electrolytes. Formation of such amorphous systems by the introduction of silver via photo-induced diffusion in thin chalcogenide films is considered. The influence of silver on the properties of the newly formed materials is regarded in terms of diffusion kinetics and Ag saturation is related to the composition of the hosting material. Silver saturated chalcogenide glasses have been used in the formation of solid electrolyte which is the active medium in programmable metallization cell (PMC) devices. In this paper, we investigated electrical and optical properties of Ag-doped chalcogenide thin film on changed thickness of Ag and chalcogenide thin films, which is concerned at Ag-doping effect of PMC cell. As a result, when thickness of Ag and chalcogenide thin film was 30nm and 50nm respectively, device have excellent characteristics.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.6
• /
• pp.533-537
• /
• 2000

It was known that chalcogenide glasses have the superior property of the photoinduced anisotropy(PA). In this study we observed the phenomenon of Ag polarized-photodoping in chalcogenide As$_{40}$ /Ge$_{10}$/Se$_{15}$ /S$_{35}$ and the double-layer of Ag doped As$_{40}$ /Ge$_{10}$/Se$_{15}$ /S$_{35}$ thin film using the irradiation with the polarized He-Ne laser light. The Ag polarized-photodoping results in reducing the time of saturation anisotorpy and increasing the sensitivity of linearly anisotropy intensity up to maximum 220% The Ag polrized-photodoping shows improvement of the photoinduced anisotropy property in polarized photodoping of the chalcogenide thin film. It will offer lots of information for the photodoping mechanism and analysis of chalcogenide thin film.in film.ilm.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.727-730
• /
• 2002

Chalcogenide glassy semiconductors(CGS) can be obtained by the melt quenching technique. We have investigated the thin film heterostructures : metal-chalcogenide glassy semiconductors, where metal is copper, and chalcogenide glassy semiconductors are glasses of the system As-Se. Cu/CGS film heterostructure were produced in the vacuum evaporator by the method of vacuum thermal evaporation. Doped films are very sensitive to external actions, and this property allows developing supersensitive precision sensors of temperature, humidity, illumination, and etc. based on them. Cu/CGS film has shown that resistance strongly depend on the temperature. The slop of temperature and resistance shows linear.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.248-248
• /
• 2010

We have demonstrated new functionalities of Ag-doped chalcogenide glasses based on their capabilities as solid electrolytes. The influence of silver on the properties of the newly formed materials is regarded in terms of diffusion kinetics, and Ag saturation is related to the composition of the hosting material. Silver saturated in chalcogenide glass has been used in the formation of solid electrolyte, which is the active medium in the programmable metallization cell (PMC) device. In this paper, we investigated the optical properties of Ag-doped chalcogenide thin film by He-Ne laser beam exposure, which is concerned with the Ag-doping effect of PMCs before or after annealing. Chalcogenide bulk glass was fabricated by a conventional melt quenching technique. Amorphous chalcogenide and Ag thin films were prepared by e-beam evaporation at a deposition rate of about $4\;{\AA}/sec$. As a result of resistance change with laser beam exposure, the resistance abruptly dropped from the initial value of $1.4\;M{\Omega}$ to the saturated value of $400\;{\Omega}$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.3
• /
• pp.213-217
• /
• 2012

In this study, we have investigated the holographic grating formation on Ag-doped amorphous As-Ge-Se-S thin films. The dependence of diffraction efficiency as afunction of Ag layer thickness has been investigated in this amorphous chalcogenide films. Holographic gratings was formed using [P:P] polarized Diode Pumped Solid State laser (DPSS, 532.0 nm). The diffraction efficiency was obtained by +1st order intensity. The results were shown that the diffraction efficiency of Ag/AsGeSeS double layer thin films for the Ag thickness, the maximum grating diffraction efficiency using 60 nm Ag layer is 0.96%.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.12
• /
• pp.1022-1026
• /
• 2007

We have demonstrated new functionalities of Ag doped chalcogenide glasses based on their capabilities as solid electrolytes. Formation of such amorphous systems by the introduction of silver via photo-induced diffusion in thin chalcogenide films is considered. The influence of silver on the properties of the newly formed materials is regarded in terms of diffusion kinetics and Ag saturation is related to the composition of the hosting material. Silver saturated chalcogenide glasses have been used in the formation of solid electrolyte which is the active medium in programmable metallization cell (PMC) devices. In this paper, we investigated electrical and optical properties of Ag-doped chalcogenide thin film on changed thickness of Ag and chalcogenide thin films, which is concerned at Ag-doping effect of PMC cell. As a result, when thickness of Ag and chalcogenide thin film was 30 nm and 50 nm respectively, device have excellent characteristics.

• Ceramist
• /
• v.10 no.3
• /
• pp.34-47
• /
• 2007

Photoinduced phenomena in non-crystalline insulators and semiconductors, specifically oxide and chalcogenide glasses, are briefly reviewed with some comments.