• 한국토양비료학회지
• /
• 제17권2호
• /
• pp.147-154
• /
• 1984

수산화철 및 알루미늄 광물을 함유하는 토양의 물리화학적 및 표면 전하의 특성을 보다 정확히 이해하기 위하여 $FeCl_3$와 $AlCl_3$ 용액으로부터 두 종류의 수산화철광물(A와 B) 및 수산화알루미늄 광물을 합성하였다. X-ray 회절분석에 의하여 수산화철 A광물은 무정형, B광물은 다량의 무정형과 함께 goethite광물이 존재하는 것으로 밝혀졌다. $105^{\circ}C$에서 건조한 결과 A광물은 소량의 무정형과 함께 akaganeite 광물, B광물은 순수 goethite로 변하였다. 한편 합성된 수산화알루미늄 광물은 gibbsite와 bayerite 광물이 약 7:3의 비율로 혼합된 것으로 밝혀졌다. 유리 또는 무정형의 철과 알루미늄을 선택적으로 용출하는 것으로 알려진 dithionite와 oxalate용액을 이용하여 이들 수산화물을 세척한 결과 dithionite가 철 용출력은 가장 강했으나 oxalate에 의한 알루미늄 용출만이 수산화알루미늄 광물중의 무정형 광물 함량을 감소하고 결정성 광물의 결정도를 높였다. 타 광물과 달리 수산화철 A광물에서 dithioite에 의한 철의 용출이 가장 많았으나 냉동건조를 제외한 건조($105^{\circ}C$의 열건조 및 $P_2O_5$ 건조)에 의하며 그 용출량이 급격히 감소하였다. 수산화철 A광물의 표면적이 가장 컸으며 역시 냉동 건조를 제외한 건조처리에 의하여 그 표면적이 현저히 감소하였고, 이들 광물중의 점토($2{\mu}m$이하)함량도 표면적의 변하와 같은 경향을 보였다. 또한 표면 전하의 절대량 발달도 수산화철 A광물이 가장 컸으며 이들 광물들의 등전점은 각각 수산화철 A광물이 8.0-8.5사이, B광물이 7.5-8.0사이로써 높았고 수산화알루미늄 광물이 5.5-6.0 사이로써 낮았다.

• 한국재료학회지
• /
• 제12권7호
• /
• pp.540-544
• /
• 2002

Hydration treatments were performed on the pure aluminum substrate at $100^{\circ}C$ followed by anodizing and heat treatments on the layers. The transformation behaviors of the oxide layers according to the hydration treatment were studied using TEM, XRD, RBS etc. Above $90^{\circ}C$ the hydrous oxide film could be formed, which were turned out to be hydrous oxides(AlOOH $nH_2$O). The anodization on the hydrous oxide film was more effective for the transition of amorphous anodic oxides to the crystalline $\Upsilon-Al_2$ $O_3$ comparing with the case for anodizing on the aluminum substrate without hydration treatment And additional heat treatments were also helpful for the acceleration of the transformation of the hydrous oxide to $\Upsilon-Al_2$ $O_3$. During the heat treatment the interface between $\Upsilon-Al_2$ $O_3$and the hydrous oxide layers migrated to the outer side of hydrous layer.

• 한국세라믹학회지
• /
• 제28권5호
• /
• pp.365-372
• /
• 1991

LAS (lithium aluminosilicate) sol was synthesized using the hydrolysis-condensation reaction of TEOS, chelated Al(OBus)3 and Li-salt with H2O in alcohol (EtOH+2-Propanol) medium. Effects of important reaction parameters on the properties of sol and gel-derived LAS were examined. The crystallization of the sol-gel derived LAS with ${\beta}$-spodumene composition began at ∼600$^{\circ}C$, and a series of polymorphic transformations occurred as temperature was increased to 1100$^{\circ}C$: amorphous LAS\longrightarrowhexagonal LiAl(SiO3)2\longrightarrow${\beta}$-spodumene. Lowering Li content in the gel enhanced densification and retarded the crystallization significantly. Optimum reaction conditions of LAS sol formation for thin coating applications were derived from rheological measurements, and these can be summarized as: H2O/total alkoxides molar ratio=4, pH=∼2.5, and aging time of ∼250h.

• 한국세라믹학회지
• /
• 제41권1호
• /
• pp.51-56
• /
• 2004

$Al(OH)_3$, 비정질 $SiO_2$, $AIF_3$를 출발원료로 기상-고상 반응을 통해 $1100^{\circ}C$의 저온에서 뮬라이트 휘스커를 합성하였다. $800^{\circ}C$ 온도부근에서 협상의 플루오르토파즈의 생성이 관찰되었으며, $1000^{\circ}C$부터 토퓨ㅏ즈의 분해갸 시작되어 $1100^{\circ}C$ 이상의 온도에서는 전량 뮬라이트가 관찰되었다. $1200^{\circ}C$에서 합성된 뮬라이트 휘스커는 성장 방향이 [001] 방향이었으며, 성장방향에 평형한 면은 {110}면이었다. {110}면사이의 면간 거리는 $5.34^{\AA}C$이었으며, 뮬라이트를 이루는 $Al_2O_3$의 함유량은 73.56wt%이었다.

• 한국세라믹학회지
• /
• 제41권11호
• /
• pp.864-871
• /
• 2004

폐 염화알루미늄(AlCl$_3$) 수용액과 수산화나트륨(NaOH) 용액의 가수분해 반응에 의해 무정형의 수산화알루미늄 겔을 석출시키고, 이를 숙성하여 다공성 유사베마이트(pseudo-boehmite) 겔을 제조하였다 pH를 7.6～11.6 범위로 조절하고 반응온도를 60～10$0^{\circ}C$로 변화시켜 2～24시간 숙성시켰을 때, 겔 침전물의 결정변화, 적외선흡수스펙트럼의 변화, 비표면적 및 기공구조의 변화를 조사하여 최대 기공부피를 갖는 유사베마이트 겔의 제조조건을 확립하였다. pH 7.6～9.6 범위에서 석출된 겔 침전물로부터 250～357 $m^2$/g 정도의 비표면적과 0.4～0.74 cc/g의 기공부피 그리고 58～l14$\AA$의 평균기공크기를 갖는 다공성 유사베마이트가 제조되었으며, pH 10.6～11.6 범위에서 석출된 겔 침전물로부터는 기공이 거의 없는 베이어라이트(bayerite)가 제조되었다.

• Bulletin of the Korean Chemical Society
• /
• 제31권5호
• /
• pp.1241-1246
• /
• 2010

Ternary Cu/ZnO/$Al_2O_3$ catalysts were prepared by a co-precipitation method. The precursor structures were monitored during the aging. The first precipitate structure was amorphous georgeite, which transformed into the unknown crystalline structure. The transition crystalline structure was assigned to the crystalline georgeite, which was suggested with elemental analysis, IR and XRD. The final structure of precursors was malachite. The Cu surface area of the resulting Cu/ZnO/$Al_2O_3$ was maximized to be 30.6 $m^2$/g at the aging time of 36 h. The further aging rapidly decreased Cu surface areas of Cu/ZnO/$Al_2O_3$. ZnO characteristic peaks in oxide samples almost disappeared after 24 h aging, indicating that ZnO was dispersed in around bulk CuO. TOF of the prepared catalysts of the Cu surface area ranges from 13.0 to 30.6 $m^2/g_{cat}$ was to be 2.67 ${\pm}$ 0.27 mmol/$m^2$.h in methanol synthesis at the condition of $250^{\circ}C$, 50 atm and 12,000 mL/$g_{cat}$. h irrespective of the XRD and TPR patterns of CuO and ZnO structure in CuO/ZnO/$Al_2O_3$. The pH of the precipitate solution during the aging time can be maintained at 7 by $CO_2$ bubbling into the precipitate solution. Then, the decrease of Cu surface area by a long aging time can be prevented and minimize the aging time to get the highest Cu surface area.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2001년도 International Meeting on Information Display
• /
• pp.209-212
• /
• 2001

We report the synthesis and characterization of new alkoxy substituted spirobifluorene derivatives. The spiro compounds having alkoxy hydrocarbon chains were readily soluble in common organic solvents, having improved film-forming properties and had a significantly reduced tendency to crystallize, resulting in increasing their service lifetime. The results of DSC showed that it was amorphous. The optical and electroluminescent spectra were characterized. Electroluminescence (EL) properties of three-layer light emitting diodes (LED) of $ITO/TPD/spirobifluorene/Alq_3/LiF/Al$ as the active layer were characterized. Blue emission peaking of the EL spectrum of the three-layer device at 402 nm and a luminance of 3,125 $cd/m^2$ were achieved at a drive voltage 12.8 V. The luminous efficiency was obtained to be 1.7 lm/W. The color coordinate in CIE chromaticity is (0.16, 0.09), which is in a pure blue region. The external quantum efficiency was obtained to be 2.0%. The results indicate that the spirobifluorene compounds having alkoxy hydrocarbon chains are strongly potential blue emitters for LED applications.

• 자원환경지질
• /
• 제29권6호
• /
• pp.733-738
• /
• 1996

Heavy metal equilibria in the Dongnam stream which receives the wastewater from mining activities are investigated to provide some basic data for the management of small stream with acid mine drainage. Saturation, undersaturation, and supersaturation of some heavy metal ions with respect to some mineral phases are evaluated by saturation index (logIAP/Ksp). The $Al^{3+}$ activities showed equilibrium with $AIOHSO_4$ solid phase below a pH of 6.0. The $Fe^{3+}$ activities appeared to be controlled by Fe $(OH)_{3(amorphous)}$ solid phase below a pH of 4.0. $Zn^{2+}$ activities appeared to be regulated by $ZnCO_3$ solid phase above a pH of 6.8. Some heavy metal activities appeared to be depended upon the pH.

• 한국세라믹학회지
• /
• 제42권4호
• /
• pp.237-244
• /
• 2005

비정질알루미나와 기공형성제에 물을 혼합하여 원통형으로 성형하고 수화한 다음, 건조 및 소성하여 직경 5mm, 평균 길이 약 10mm의 $\gamma-$알루미나 펠릿을 제조하였다. 이를 $Fe(NO_{3})_{3}{\cdot}9H_{2}O$용액과 $CH_{3}COOH$ 혼합용액에 침척시켜 $200^{\circ}C$ 온도로 3시간 수열처리한 후, 건조하고 소성하여 촉매를 제조하였다. 이와 같이 수열법에 의해 제조된 $Fe_{2}O_{3}/\gamma-Al_{2}O_{3}$ 세라믹촉매를 환경촉매로 적용하기 위해, 아닐린과 같은 난분해성물질을 촉매를 사용하지 않는 오존단독공정과 촉매를 사용하는 촉매오존(catalytic ozonation)공정으로 구분하여 $OH^{\cdot}$ 라디칼 전환반응 개시제로서의 기능과 그 분해특성을 비교하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.75.2-75.2
• /
• 2010

We studied the fabrication of polycrystalline silicon (pc-Si) films as seed layers for application of pc-Si thin film solar cells, in which amorphous silicon (a-Si) films in a structure of glass/Al/$Al_2O_3$/a-Si are crystallized by the aluminum-induced layer exchange (ALILE) process. The properties of pc-Si films formed by the ALILE process are strongly determined by the oxide layer as well as the various process parameters like annealing temperature, time, etc. In this study, the effects of the oxide film thickness on the crystallization of a-Si in the ALILE process, where the thickness of $Al_2O_3$ layer was varied from 4 to 50 nm. For preparation of the experimental film structure, aluminum (~300 nm thickness) and a-Si (~300 nm thickness) layers were deposited using DC sputtering and PECVD method, respectively, and $Al_2O_3$ layer with the various thicknesses by RF sputtering. The crystallization of a-Si was then carried out by the thermal annealing process using a furnace with the in-situ microscope. The characteristics of the produced pc-Si films were analyzed by optical microscope (OM), scanning electron microscope (SEM), Raman spectrometer, and X-ray diffractometer (XRD). As results, the crystallinity was exponentially decayed with the increase of $Al_2O_3$ thickness and the grain size showed the similar tendency. The maximum pc-Si grain size fabricated by ALILE process was about $45{\mu}m$ at the $Al_2O_3$ layer thickness of 4 nm. The preferential crystal orientation was <111> and more dominant with the thinner $Al_2O_3$ layer. In summary, we obtained a pc-Si film not only with ${\sim}45{\mu}m$ grain size but also with the crystallinity of about 75% at 4 nm $Al_2O_3$ layer thickness by ALILE process with the structure of a glass/Al/$Al_2O_3$/a-Si.