• Economic and Environmental Geology
• /
• v.5 no.4
• /
• pp.187-209
• /
• 1972

Drilling position is one of the most important factors affecting on the blasting effects. There has been many reports on several blasting factors of burn-cut by Messrs. Brown and Cook, but in this study the author tried to compare drilling positions of burn-cut to pyramid-cut, and also to correlate burn-cut effects of drilling patterns, not being dealt by Prof. Ito in his theory, which emphasized on dynamical stress analysis between explosion and free face. According to former theories, there break out additional tensile stress reflected at the free face supplemented to primary compressive stress on the blasting with one-free-face. But with these experimented new drilling patterns of burn-cut, more free faces and nearer distance of each drilling holes make blasting effects greater than any other methods. To promote the above explosive effect rationary, it has to be considered two important categories under-mentioned. First, unloaded hole in the key holes should be drilled in wider diameter possibly so that it breaks out greater stress relief. Second, key holes possibly should have closer distances each other to result clean blasting. These two important factors derived from experiments with, theories of that the larger the dia of the unloaded hole, it can be allowed wider secondary free faces and closes distances of each holes make more developed stress relief, between loaded and unloaded holes. It was suggested that most ideal distance between holes is about 4 clearance in U. S. A., but the author, according to the experiments, it results that the less distance allow, the more effective blasting with increased broken rock volume and longer drifted length can be accomplished. Developed large hole burn-cut method aimed to increase drifting length technically under the above considerations, and progressive success resulted to achieve maximum 7 blasting cycles per day with 3.1m drifting length per cycle. This achievement originated high-speed-drifting works, and it was also proven that application of Metallic AN-FO on large hole burn-cut method overcomes resistance of one-free-face. AN-FO which was favored with low price and safety handling is the mixture of the fertilizer or industrial Ammonium-Nitrate and fuel oil, and it is also experienced that it shows insensible property before the initiation, but once it is initiated by the booster, it has equal explosive power of Ammonium Nitrate Explosives (ANE). There was many reports about AN-FO. On AN-FO mixing ratio, according to these experiments, prowdered AN-FO, 93.5 : 6.5 and prilled AN-FO 94 : 6, are the best ratios. Detonation, shock, and friction sensities are all more insensitive than any other explosives. Residual gas is not toxic, too. On initation and propagation of the detonation test, prilled AN-FO is more effective than powered AN-FO. AN-FO has the best explosion power at 7 days elapsed after it has mixed. While AN-FO was used at open pit in past years prior to other conditions, the author developed new improved explosives, Metallic AN-FO and Underwater explosive, based on the experiments of these fundmental characteristics by study on its usage utilizing AN-FO. Metallic AN-FO is the mixture of AN-FO and Al, Fe-Si powder, and Underwater explosive is made from usual explosive and AN-FO. The explanations about them are described in the other paper. In this study, it is confirmed that the blasting effects of utilizing AN-FO explosives are very good.

• Korean Journal of Soil Science and Fertilizer
• /
• v.16 no.2
• /
• pp.131-155
• /
• 1983

Though it has been widely known the nitrogen effects are influenced by soils, varieties, and mineral nutrients in the rice culture, few analyses in relation to the factors increasing nitrogen effect have been studied in Korea. The effects of potassium and silica on the factors increasing nitrogen effects in paddy soils were investigated in accordance with soil improvement practices and nitrogen application methods for the cultivated varieties. The results obtained are as follows. 1. For 413 paddy fields, the yield from soils without nitrogen application ranged from 200 to 850kg/10a and that from nitrogen application did 350 to 1,051kg/10a. The yield increament by nitrogen application varied 50 to 650kg/10a depending on soils. 2. Soil chemical characteristics for high yield were different between with nitrogen and without nitrogen application. In the without nitrogen application, however, contents of organic matter, phosphorous, potassium and calcium of high yield soils were lower than those of low yield, while the available silica content was higher in the former. 3. The yield increased with nitrogen application up to 22.4kg/10a and thereafter it decreased. These phenomena were supposed to be not be decrease of nitrogen uptake but by lowered silica uptake. 4. Clay soil incorporation, deep plough, and inorganic constituents control such as Ca, Mg, and $Sio_2$ were effective as soil improvement praitices. It was appeared that increases of silica content and Ca/Mg ratio were important to increase nitrogen effects. 5. For the correlation between yield and yield components, it was high between yield and panicle in low nitrogen level and so was it between grain yield and ripening rate in high nitrogen. 6. In the urea and super granule urea application plot, recovery rate of nitrogen by plant and soil was high and yield was remarkable high. 7. Regardless of fertilizer types such as ammonium sulfate and urea, the residual nitrogen was about 4kg/10a in both plots of 5.8 and 11.6kg/10a. N applied. 8. The potassium application to soil enhanced the nitrogen efficiency. It was more effective in low potassium soil. 9. Optimum pH value for gel formation in the 4% sodium silicate solution was approximately 6.6. 10. It was suggested that silica could affect to rice plant growth as the inorganic and organic chemical components.

• Korean Journal of Microbiology
• /
• v.17 no.3
• /
• pp.97-130
• /
• 1979

Many industrial processes those employ bacteria are subjected to phage infestations. In L-glutamic acid fermentions using acetic acid, the phage infestations of the organisms have been recently recognized. In efforts to elucidate the sources of phage contamination involved in the abnormal fermentation, a series of study was conducted to isolate the phages both from the contents of abnormally fermented tanks and the soil or sewage samples from the surroundings of a fermentation factory, to define major charateristics of the phage isolates, and finally to determine the correlation between the phage isolates and temperate phages originating from the miscellaneous bacterial species isolated from the soil or sewage samples. The results are summarized as follows; 1) All phages were isolated from the irregular fermentation tanks and soil or sewage samples, and they were designated as phage PR-1, PR-2, PR-3, PR-4, PR-5, PR-6, and PR-7, in the order of isolation. These PR-series phages were proved to be highly specific for the variant strains of Br. lactofermentum only, namely, phage PR-1 and PR-2 for Br. lactofermentum No. 468-5 and phage PR-3~PR-7 for Br. lactofemrentum No. 2256. By cross-neutralization test, the 7 phagescould be subdivided into 3 groups, i. e., phage PR-I and PR-2 the first, phage PR-3, PR-4, PR-5, PR-6 the second, and the phage PR-7 the third. 2) The 7 phages were virulent under the experimental conditions. They produced plaques with clear and relatively sharp margins without distinct halo. The mean sizes of plaques were 1.5mm in diameter for phage PR-1 and PR-2, and 1. Omm for phages PR-3~PR-7. Double layer technique modified by Hongo and described by Adams, was applied to assay of the PR-series phages. The factors influencing the plaques were as follows;young age cells of host bacteria cultured for 3-6 hours represented the largest number and size, optimum was pH 7.0, incubation temperature was $30^{\circ}C$, and agar concentration and amount of overlayer medium were 0.6% and 0.2ml, respectively. 3) PR-series phages were stable in 0.05M tris buffer and 0.1M ammonium acetate buffer solution. The addition of $5{\times}10^{-3}M$ magnesium ion effectively increased the stability. Thermostability experiments indicated that PR-series phages were stable at the teinperture between $50^{\circ}{\sim}55^{\circ}C$ in nutrient medium, $45^{\circ}{\sim}50^{\circ}C$ in buffer solution. However, the phages mere completely inactivated at 603C and 65$^{\circ}$C within 10 minutes. The phages were stable at the range of pH6~9 in nutrient medium and of pH 8-9 in buffer solution, respectively. Exposure of the phages to UV for 25, 60 and 100 seconds resulted in the complete loss of infectivily, respectively. 4) Electron microscopy showed that PR-series phage particles exhibited rather similar morphology, differing in the size All of PR-series phages had a multilateral head and had a simple long tiil about three to five times long as compared with head. By the size, phage PR-1 and PR-2, PR-3, PR-4, PR-5, and PR-6 and PR-7 were classified into same groups, respectively. The head and tail size of phage PR-1, PR-5, PR-5(T) and PR-7 were 85nm, 74nm and 235nm and 350mm, and 72nm and 210nm, respectively. 5) Nucleic acids of PR-series phages were double stranded DNA. The G+C contents of phage PR-1, PR-5 and PR-7 were 56.1, 52.9 and 53.7, respectively. The values of G+C contents derived from the $T_m$ were in agreement with the chemically determined values. 6) PR-series phages effectively adsorbed on their host bacteria at the rate of more than 90% during 5 min. K value for phage PR-1, PR-5 and PR-7 were calculated to be $6{\times}10^9 ml$ per minute, respectiveky. The pH of the medium did effect adsorption rate, but both temperature and age of host cells did not. Generally, optimum adsorption condition of phages seemed to be almost same as optimum growth conditions of host bacteria. 7) In one-step growth experiments, the latent periods at $30^{\circ}C$ for PR-1, and PR-7 were about 70, 50 and 55 min, respectively. The corresponding average burst size was 200, 70 and 90, respectively. Lpsis period according to the multiplicity of infection and a phage series. In case of m. o. i. 100, strain No. 2256 (PR-5) and No. 468-5(PR-1) failed to grow and turbidity decreased after 50 and 70min, respectively. 8) In the lysate of a plaque purified phage PR-5 infected bacteria, there observed 2 types ofphage particles, i. e., phage PR-5 and PR-5 (T) of similar morphology but differing at the length of phage tail, and phage tail like particles. The phage taillike particles could be divided into 4 types by the length. Induction experiments of Br. lactofermentum with UV irradiation, mitomycin C or bacitracin treatment produced neither phage PR-5 (T) or phage tail-like particles. 9) No lysis occured when the growth of 7 strains of miscellaneous bacteria, isolated from soil and sewage samples, were inoculated with either phage PR-5 (T) or phage tail-like particles the inoculation of phage PR-5 pellet resulted in the growth inhibition of the orgainsms in the spot test. The lysates obtained from 3 miscellaneous soil derived bacteria following mitomycin C treatment the growth of Br. lactofermentum, but did not lyze the bacterium.

• Korean journal of applied entomology
• /
• v.12 no.2
• /
• pp.71-78
• /
• 1973

The study was performed to clear the effects of thiamine, biotin, nicotinic acid, pyridoxine, inositol, deoxyribonucleic acid (DNA) and ribonucleic acid (RNA) on the mycelial growth and the sclerotial production of Sclerotium rolfsii Sacc. isolated from Magnolia kobus. The results are abstracted as follows: 1. Tested fungus was thiamine- deficient and required thiamine 20r/l for maximum growth of mycelia. At higher concentrations than thiamine 20r/l, however, mycelial growth was decreased with increasing the concentrations and was inhibited little less than that of thiamine-free control at 150r/l. 2. The effecfivenesses of the nitrogen sources on the mycelial growth under the thiamine presence were recognized in order of $NH_4NO_3>(NH_4)_2SO_4 >asparagine> KNO_3$, and on the sclerotial production were $KNO_3>NH_4NO_3>asparagine>(NH_4)_2SO_4$. The optimum concentrations of thiamine were about 12r/1 in $KNO_3$, about 16r/1 in asparagine on the growth of mycelia, and were about 8r/l in $KNO_3\;and\; NH_4NO_3,\; 16r/1$ in asparagine on the production of sclerotia. 3. After the organism began to grow, the pH value of cultral filtrate was rapidly dropped down to about 3.5. Hereafter it was slowly fallen down as the growth amount was increased, but was not depreciated below pH 2.2. 4. Nicotinic acid was not effective individually on the mycelial growth and the sclerotial formation of tested fungus without thiamine, but slight effect of it was recognized with thiamine 10r/l, even though maximum growth was shown at 7-10mg/1. Beyond that concentration, however, mycelial growth was rather depressed. 5. When ammonium sulphate or asparagine as the nitrogen sources was used, pyridoxine, biotin and inositol had not any effectivenesses on the mycelial growth and the sclerotial production of examined fungus. 6. In the concentrations of thiamine, biotin, pyridoxine and inositol, as long as thiamine was not added in those, their correlating effects on the growth of the organism were not observed at all. Equivalent or more effects on the mycelial growth were recognized in combinations of thiamin + pyridoxine, thiamine + inositol, thiamine + biotin + pyridoxine, and thiamine + biotin + pyridoxine + inositol compared with thiamino alone, and in combinations of thiamine + biotin and thiamine + biotin + inositol, mycelial growth was inhibited rather than that of thiamine alone. Sclerotial production of those combinations was increased more than that of thiamine alone in dry weight. 7, The little effects of DNA and RNA on the mycelial growth of the organism were recognized compared with the control(DNA-and RNA-free), and RNA was more effective than DNA. Maximum growth of mycelia was observed at RNA 2-6mg/1 and DNA 6mg/l. No effectivenesses on the sclerotial production were recognized in the RNA and DNA. 8. Mycelial growth of the organism was increased with increasing the concentrations of the RNA and the thiamine, that is, the effectiveness of RNA was revealed apparently under presence of thiamine, but was not shown in the sclerotial formation.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.6
• /
• pp.799-805
• /
• 1998

In present paper, we examined the flayer constituents and functionality of two stage enzyme hydrolysates (TSEH) of purplish clam and oyster, and also examined reappearance of oyster flavors through repreparation of individual flayer constituents. Total free amino acid contents in TSEH was $1943.0mg\%$ for purplish clam and was $5066.2 mg\%$ for oyster, respectively, Major free amino acids in purplish clam extracts were taurine, glutamic acid, glycine, alanine, Iysine and arginine, and in oyster extracts were taurine, asparagine, glutamic acid, valine, leucine, alanine, Iysine and arginine. As for nucleotides and related compounds, AMP was the principal component though small amounts in TSEH of purplish clam and oyster, and also contents of TMAO, total creatinine, and betaine were $41.2 mg\%,\;35,9 mg\%$ and $220.9 mg\%$ for that of purplish clam and $3.51 mg\%,\;33.4 mg\%$ and $380.9 mg\%$ that of oyster, respectively. The major inorganic ions in TSEH of both samples were Na, K, P, Cl and $PO_4$, and major non-volatile organic acid was succinic acid. The TSEH of purplish clam and oyster revealed very higher inhibition effect ($84.1\%,\;77.0\%$) in ACE inhibition than that ($0\~44.7\%$) of water and autolytic extract. A synthetic oyster extract prepared from pure chemicals on the basis of the analytical data on the TSEH, satisfactorily reproduced the taste of the natural extract except for a slight lack of mildness and odor. From the omission test the major taste compounds of oyster extract were free amino acid and inorganic ions. The quaternary ammonium bases, nucleotides and related compounds seemed to net an auxiliary role in taste of that.

• Korean Journal of Food Science and Technology
• /
• v.39 no.4
• /
• pp.372-379
• /
• 2007

A high-performance liquid chromatography-electrospray ionization (HPLC-ESI) tandem MS was developed for the rapid and simultaneous determination of forbidden medicines in dietary supplements. Thirteen medicinal components such as PDE-5 inhibitors and their analogues, and the newly identified dimethylsildenafil and xanthoanthrafil, were included in this study. After tentative standardization of molecular ions in both polarities using thirteen references on the mass spectrometer, with ESI-continuous infusion via the syringe pump method, the relative intensity of the ions present in the resulting spectra was quantitatively compared. From the results, the ion mode was selected depending on each reference's characteristics. A HPLC method coupled with the ESI mode was developed considering the matrix effect and interference depending on the type of sample. The validation test of the developed method was followed by carrying out precision, accuracy, recovery, sensitivity and linearity, etc. The method showed sufficiently high sensitivity, reproducibility, and specificity, and produced 4 times faster results when compared with the existing HPLC/UV method for the determination of forbidden compounds in dietary supplements.

• Journal of Plant Biology
• /
• v.39 no.1
• /
• pp.63-69
• /
• 1996

A hairy root clone of Panax ginseng C.A. Meyer, HRB-15 was cultured iu various conditions with 3 L bubble type bioreactor to enhance both growth and ginsenoside production. The hairy roots were more rapidly grown under the dark condition than under the light condition. However, total amount of ginsenoside of hairy roots cultured under the light for 30 days increased 2 folds as compared with the dark condition and was 1.10% based on 6 ginsenosides. Especially, ginsenoside-Re was significantly increased and some ginsenosides except for ginsenoside-Re was slightly reduced. Also, the growth of hairy roots decreased about 30% as compared with the dark condition. In contrast, addition of sodium acetate led to decreased production of ginsenoside and growth of hairy roots under light condition. The influence of potassium dihydrogenphosphate concentration was examined in MS medium and a 1.25 mM concentration was found to be the most appropriate for growth and ginsenoside production under light condition. Two-step process of hairy roots culture with yeast elicitation or without ammonia in culture medium was developed to enhance growth and giusenoside synthesis. $50\;\mu\textrm{g}$ of yeast elicitor per g of fresh weight showed a synergistic effect on the ginsenoside synthesis of hairy roots on 20 days after culture. At that time, the content of total ginsenoside was 1.15%, while the growth of hairy roots decreased 21 % as compared with the dark condition. In addition, when elimination of ammonia on 20 days after culture, the content of total ginsenoside was 1.26% with significant increment of ginsenoside-Rd (0.27%) in addition to ginsenoside-Re and the growth of hairy roots decreased 10% as compared with the dark condition. In this system, we have demonstrated a unique two-step process of hairy root cultures to maximize biomass and secondary metabolites. It has found possibility to enhance ginsenosides production by growing hairy roots in this method.

• Microbiology and Biotechnology Letters
• /
• v.26 no.3
• /
• pp.250-256
• /
• 1998

D-Tagatose production from D-galactose was investigated using 35 type strains of American Culture Type Collection (ATCC) and Korean Collection for Type Cultures (KCTC) which have potential to produce D-tagatose. Enterobacter agglomerans ATCC 27987 was selected as a D-tagatose producing strain due to its short fermentation time and high production of D-tagatose. Optimization of the culture conditions for D-tagatose production by E. agglomerans ATCC 27987 was performed. Among various carbon sources, D-galactose was the most effective carbon source for D-tagatose production. As the D-galactose concentration was increased, cell growth and D-tagatose production increased. Effect of nitrogen sources on D-tagatose production was studied. Of inorganic nitrogen sources, ammonium sulfate was effective one for D-tagatose production and yeast extract was the most suitable organic nitrogen nutrient. The concentrations of inorganic compounds such as KH$_2$PO$_4$, K$_2$HPO$_4$, and MgSO$_4$$.$7H$_2$O were also optimized for D-tagatose production. The optimal medium was determined to contain D-galactose of 20 g/l, yeast extract of 5.0 g/l, (NH$_4$)$_2$SO$_4$ of 2.0 g/l, KH$_2$PO$_4$ of 5.0 g/l, K$_2$HPO of 5.0 g/l, and MgSO$_4$$.$7H$_2$O of 5 mg/l. The optimal environmental conditions in a 250-$m\ell$ flask were found to be pH of 6.0, temperature of 30$^{\circ}C$, and agitation speed of 150 rpm. D-tagatose of 0.41 g/l could be obtained in 24 h from 20 g/l D-galactose at the optimal culture condition without induction and cell concentration.

• Journal of Korean Society of Forest Science
• /
• v.38 no.1
• /
• pp.13-18
• /
• 1978

In this study, enzymatic hydrolysis of the holocellulose from Alnus hirsuta (Spach) Rupr. (8-14 yr's) was investigated using crude cellulase preparations of Trichoderma viride Pers. ex. Fr. SANK 16374. And conducted on the optimum condition of the treated substrate for saccharification. A strain of Trichoderma viride Pers. ex. Fr. SANK 16374 was found to be highly efficient for the cellulase productivity, especially in the submerged culture process. The culture medium used in this experiment was prepared from an extract of wheat bran consisting also of $KH_2PO_410$, $(NH_4)_2$ $SO_4$ 3, $NaNO_3$ 3, and $MgSO_4$ $7H_2O$ 0.5g/l. Cellulose powder (Toyo filter paper, 60 mesh) was found to be an importent factar for inducing the cellulase formation. And the cellulase produced in the culture fluid was salted out quantitatively by the use of ammonium sulfate (Fig. 1) Reducing sugar was determined by the Dinitrosalicylic acid (DNS) method, using reagents prepared according to the method of Sumner (1925). The results obtained were summerized as follows; 1. The method of delignification were treated by the Peracetic acid (PA) method, according to the method of Toyama (1970). The yield of holocellulose were decreased in accordance with increasing concentration of Peracetic acid solution; delignification of Alnus hirsuta Rupr. with 20% Peracetic acid was satisfied for 48 hours and 40%~60% peracetic acid was satisfied for 24 hrs: 2. The substrate (holocellulose) was changed easely into fine powder with enzymatic hydrolysis and cellulase exhibits optimum activity on the reducing sugar formation from substrate at the range of 60-100 mesh. 3. The reducing sugar formation increased in accordance with increasing dry temperature on holocellulose substrate was found to be $190{\pm}5^{\circ}C$. 4. The optimal heat treated time of holocellulose substrate was found to be 45 min. for the reducing sugar formation showed the best products. The reducing sugar formation did not show statisticaly significent diflerences at 5% levels by heat treated time for 45 min. and 60 min.

• Journal of Life Science
• /
• v.19 no.7
• /
• pp.994-1002
• /
• 2009

A bacteriocin-producing bacterium identified as Bacillus licheniformis was isolated from soybean sauce. Antibacterial activity was confirmed by paper disc diffusion method, using Micrococcus luteus as a test organism. The bacteriocin also showed antibacterial activities against Bacillus sphaericus, Lactobacillus bulgaricus, Lactobacillus planiarum, Paenibacillus polymyxa, and Pediococcus dextrinicus. Optimal culture conditions for the production of bacteriocin was attained by growing the cells in an MRS medium at a pH of 6.5~ 7.0 and a temperature of 37$^\circ$C for 36$\sim$48 hr. Solvents such as chloroform, ethanol, acetone, and acetonitrile had little effect on bacteriocin activity. However, about 50% of bacteriocin activity diminished with treatment of methanol and isopropanol at the final concentration of 50% at 25$^\circ$C for 1 hr. It was stable against a pH variation range from 3.0 and 7.0, but the activity reduced to 50% at a pH range from 9.0 to 11.0. It's activity was not affected by heat treatment at 100$^\circ$C for 30 min and 50% of activity was retained after heat treatment at 100$^\circ$C for 60 min, showing high thermostability. The bacteriocin was purified to a homogeneity through ammonium sulfate precipitation, SP-Sepharose ion-exchange chromatography, and reverse-phase high-performance liquid chromatography (HPLC). The entire purification protocol led to a 75-fold increase in specific activity and a 13.5% yield of bacteriocin activity. The molecular weight of purified bacteriocin was estimated to be about 2.5 kDa by tricine-SDS-PAGE.