• KSBB Journal
• /
• v.10 no.2
• /
• pp.170-175
• /
• 1995

The effect of nitrogen source on production of a high viscosity exopolysaccharide, methylan, from methanol by Mentylobacterium organophilum was investigated in fed-batch culture. During the fermentation, cells continued to grow even after the nitrogen source added to the medium was depleted and methylan production was stimulated under the condition which ammonium ion was depleted. Cell growth increased proportionally to the initial concentration of ammonium ion in the medium, but methylan production was significantly inhibited at the high concentration of ammonium ion. As the initial concentration of ammonium ion increased, the specific growth rate, the specific product formation rate and the specific substrate consumption rate decreased due to the inhibitory effect of excess ammonium ions. In order to reduce the inhibitory effect by high concentration of ammonium ion. The control of ammonium ion concentration within the desired level(usually $0.45g/\ell$) was necessary. When ammonium ion concentration was maintained below $0.15g/\ell$ by exponential feeding, methylan production could be increased up to $12.5g/\ell$.

• Applied Chemistry for Engineering
• /
• v.7 no.1
• /
• pp.118-128
• /
• 1996

N-methyl, N-butyl and N,N-dibutyl chitosan derivatives were prepared by Schiff's base formation and hydrogenation in aqueous media. Furthermore quaternization of the chitosan derivatives was performed in N-methyl-2-pyrrolidone using methyl iodide to obtain water soluble cationic polyelectrolytes. It was confirmed that O-alkylation was occured as well as selective N-alkylation in these reactions. Chitosan and chitosan derivatives with quaternary ammonium iodide showed high flocculation power as the cationic flocculant. When tested on paper mill waste water, they showed high flocculation power, independing of pH range. The flocculation power was increased as the N-alkyl chain length was increased. Among them, N-butyl dimethyl chitosan ammonium iodide showed better flocculation power than chitosan. But, N,N-dibutyl-N-methyl chitosan ammonium iodide showed less flocculation powre than chitosan itself.

• Textile Coloration and Finishing
• /
• v.33 no.2
• /
• pp.72-78
• /
• 2021

The purpose of this study, the purpose of this study is to activate the antibacterial effect on the Chlorinated polyvinyl chloride film by using Octadecyldimethyl (3-triethoxy silylpropyl) ammonium chloride antibacterial agent with Chlorinated polyvinyl chloride polymer, which is inexpensive and has excellent properties such as heat resistance and chemical resistance. The Chlorinated polyvinyl chloride polymer was dissolved in a dimethylacetamide solvent, and film samples were prepared by varying the ratio of Octadecyldimethyl (3-triethoxy silylpropyl) ammonium chloride to study the antibacterial performance. A Scanning Electron Microscope-Energy Dispersive X-ray Spectrometer and X-ray photoelectron spectroscopy were employed to confirm the elements in the samples. According to the initial decomposition temperature of the Chlorinated polyvinyl chloride film and the Chlorinated polyvinyl chloride/Octadecyldimet hyl (3-triethoxy silylpropyl) ammonium chloride(10%) film using a Thermogravimetric analyzer(TA-DTA), it was confirmed that the initial decomposition temperature was lowered due to the influence of Octadecyldimethyl (3-triethoxy silylpropyl) ammonium chloride. In addition, in order to measure the mechanical properties, Universal testing machine was used and the result showed that a strength of Chlorinated polyvinyl chloride/Octadecyldimethyl (3-triethoxy silylpropyl) ammonium chloride(10%) was 36.8 MPa. The antimicrobial properties of the Chlorinated polyvinyl chloride/Octadecyldimethyl (3-triethoxy silylpropyl) ammonium chloride(10%) film showed 99.9% antimicrobial properties.

• Korean Journal of Microbiology
• /
• v.6 no.1
• /
• pp.29-35
• /
• 1968

There are many reports on the effect of salts to the fermentation of the yeasts, but there are a few reports on the effect of the ammonium thiocyanate(NH$_4CNS$) on the fermentation of the yeasts(Saccharomyces brenerei-Hefe-Rasse X11, Saccharomyces formosensis No. 396 IAM and Saccharomyces cerevisiae IAM). A study has been made on the effects of the ammonium thiocyanate on the fermentation of the above yeasts. The results of the research are as belows: 1) The addition of 0. 00001 mol. of ammonium thiocyanate makes the fermentation of the yeast(Sacch. formosensis No. 39 IAM) facilitate, but has not influenced the another yeast (Sacch. brenerei-Hefe-Rasse XII). 2) The addition of 0. 001 mol. of ammonium thiocyanate makes fermentation of Rases XII the fastest, but the on other yeast (Sacch. formosensis No - 396 IAM) was accelerated by the addition of 0. 1 mol., and it seems to have abnormal fermentation by the addition of 0. 0001 mol. The addition of ammonium thiocyanate(0. 00001-0. 001 mol.) inhibited the fermentatirn of the yeast(Sacch. cerevisiae IAM), but the concentration of 0. 1 mol. does not interrupt the fermentation of Sacch. cerevisiae IAM and increased the fermentation. 3) The order of effects to the fermentation of each yeast is Sacch. brenerei-Hefe-Rasse XII, Sacch. formosensis No. 396 IAM, Sacch. cerevisiae IAM.

• Journal of the Korean Applied Science and Technology
• /
• v.3 no.1
• /
• pp.57-64
• /
• 1986

1-(carboxyalkyl) trimethyl ammonium chlorides such as 1-(carboxyundecyl) trimethyl ammonium chloride and 1-(carboxytridecyl) trimethyiammonium chloride were synthesized by the reaction of ${\alpha}-bromoalkanoic$ acid with trimethyl amine hydrochloride. In other hand, (carboxymethyl) alkyl dimethyl ammonium chlorides such as (carboxymethyl) dodecyl dimethyl ammonium chloride and (carboxymethyl) tetradecyl dimethyl ammonium chloride were synthesized by the reaction of alkyl dimethylamine with sodium chloroacetate. The four kinds of alky carboxy betaine such as 2-(trimethylammonio) dodecanoate, 2-(trimethyl ammonio) tetradecanoate, (dodecyl dimethylammonio) ethanoate and (tetradecyl dimethyl ammonio) ethanoate were prepared from 1-(carboxyalkyl) trimethyl ammonium chlorides or (carboxymethy1) alkyl dimethyl ammonium chlorides. The surface activities including surface tension, emulsifying power, foaming power, foam stability, deflocculating effect, effectiveness of wettability and solubilizing effect were measured and also critical micelle concentration and hydrophilic-lipophilic. balance(HLB) were evaluated. These carboxy betaines show good surface activities as O/W type emulsifing agent and detergent.

• Journal of Korean Society on Water Environment
• /
• v.30 no.1
• /
• pp.1-7
• /
• 2014

The purpose of this study was to investigate the nitrification characteristics of biological aerated filter (BAF) packed with ceramic media, especially focusing on nitrite build-up during nitrification. When increasing the nitrogen load above $1.63kgNH_4{^+}-N/m^3{\cdot}d$, ammonium removal efficiency decreased to less than 60% and the nitrite ratio ($NO_2{^-}-N/NO_x-N$) of higher than 75% was achieved due to the inhibitory free ammonia (FA, $NH_3-N$) concentration and oxygen limitation. FA inhibition, however, is not recommended strategy to promote nitrite build-up since FA concentration in the reactor is coupled with decreased ammonium removal efficiency. Nitrite ratio in the effluent was also affected by aeration rate and influent ammonium concentration. Ammonium oxidation was enhanced at a higher aeration rate regardless of influent ammonium concentration but, the nitrite ratio was dependent on both aeration rate and influent ammonium concentration. While a higher nitrite ratio was obtained when BAFs were fed with $50mgNH_4{^+}-N/L$ of influent, the nitrite ratio significantly decreased for a greater influent concentration of $200-300mgNH_4{^+}-N/L$. Taken together, aeration rate, influent ammonium concentration and FA concentrations kept in the BAF were found to be critical variables for nitrite accumulation in the BAF system.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.1
• /
• pp.39-48
• /
• 2005

Nitrogen and sulfur deposition was measured on Lake Pal dang from March 2002 to October 2003. Wet and dry depositions were separately measured using wet- and dry-only samplers, respectively. In order to measure the dry deposition to the water body, a dry deposition sampler composed of three pans filled with pure water, called the deposition water, was used. Since ammonium was generally in excess in ambient air, more than half of ammonium was present in the gaseous form. Ammonium concentration was also generally higher than the sum of major anion concentrations in the deposition water because gaseous species were much easily deposited than the species in fine particles. Nevertheless, the contribution of gaseous ammonia to the deposition of ammonium was not high as well as that of particulate ammonium while the contribution of gaseous nitric acid was much higher than that of particulate nitrate. Annual wet deposition fluxes of nitrogen and sulfur were five and six times higher than their dry deposition fluxes, respectively. Except for ammonium, the dry deposition flux estimated in the present work was a half of the previous results. This was mainly caused by much smaller dry deposition velocities over the water than over the ground.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.978-983
• /
• 2017

Ammonium dinitramide(ADN) is currently under inder investigation as a replacement for ammonium perchlorate, both for environmental and toxicological reasons. Another promising application is ADN-based liquid monopropellant as a replacement for hydarzine, which is highly toxic and carcinogenic. Production of ADN is today normally performed via guanylurea dinitramide(GUDN) by reaction with potassium hydroxide to yiela potassium dinitramide(KDN). In a second reaction step, KDN is reacted with ammonium sulfate to give ADN. In our new improved process, ADN is synthesized from GUDN in one single reaction step. The simplified process improves purity, reduces the amount of by-products and allows production of ADN at a potentially lower cost, which is crucial to favour the use of ADN.

• Journal of Korean Society of Water and Wastewater
• /
• v.11 no.4
• /
• pp.43-53
• /
• 1997

In this research, the synthetic livestock wastewater was prepared to study the characteristics of organic matter removal, the change of VFA production, and the amount of gas production with respect to the change of ammonium nitrogen concentration in the waste using anaerobic fixed bed process, which is an anaerobic biofilm process. The HRT and operation temperature were 1 day and $35{\pm}1^{\circ}C$, respectively. Also, the characteristics of organic matter removal and the inhibitory effect on microorganism in the anaerobic process were studied on the organic loading and ammonium nitrogen concentration. The results obtained were as follows: For COD loading of $10kg/m^3$-day and five levels of ammonium nitrogen concentration ranging from 1,000 to 5,000 mg/L, organic removal efficiencies were about 81, 74, 67, 58, and 51%, and gas productions were 3,860, 3,520, 3,240, 3,020, and 2,790 ml/l-day, respectively. Average methane contents in the gas produced on COD loading of $10kg/m^3$-day was about 76%. Throughout the whole period of experiment, remaining VFA (as COD base) in the effluent was over 90% of remaining COD. This result indicated the inhibitory effect of high concentration of ammonium nitrogen through the facts that accumulated VFA was almost COD and organic removal efficiency decreased also with the increase of ammonium nitrogen. Especially, that implys which high concentration of ammonium nitrogen not only inhibits methane forming bacteria, but also acid forming bacteria.

• Korean Journal of Breeding Science
• /
• v.42 no.4
• /
• pp.351-356
• /
• 2010

Brachypodium distachyon is rapidly emerged in biological study and has been currently used as a model system for genetics and functional studies for crop improvement and biofuel production. Phosphinothricin (PPT) has been widely used as a selectable agent, which raises ammonium content and induces toxicity in non-transformed plant cells. However PPT selection is not much effective on Brachypodium callus consequently reducing transformation efficiency. In order to identify the efficient conditions of PPT selection, calli obtained from mature seeds of Brachypodium (PI 254867) were cultured on the callus inducing medium (CIM) or regeneration medium (ReM) containing serial dilutions of the PPT (0, 2, 5, 10, and 15 mg/l) in dark or light condition. Callus growth and ammonium content of each treatment were measured 2 weeks after the treatment. Although callus growth and ammonium content did not show much difference in CIM, slow callus growth and increased ammonium accumulation were found in ReM. No significant difference of ammonium accumulation in response to PPT was found between dark and light conditions. In order to identify major factors affecting increased ammonium accumulation, callus was cultured on the media in combined with phytohormones (2,4-D or kinetin) and carbon sources (sucrose or maltose) containing with PPT (5 mg/l). The highest ammonium content in callus was found in the kinetin and maltose media.