• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.11
• /
• pp.843-851
• /
• 2015

Among various ammonium salts and metal ammine chlorides used as solid materials for the sources of ammonia with solid SCR for lean NOx reduction, magnesium ammine chloride was taken up for study in this paper because of its ease of handling and safety. Lab-scale synthetic method of magnesium ammine chloride were studied for different durations, temperatures, and pressures with proper ammonia gas charged, as a respect of ammonia gas adsorption rate(%). To understand material characteristics for lab-made magnesium ammine chloride, DA, IC, FT-IR, XRD and SDT analyses were performed using the published data available in literature. From the analytical results, the water content in the lab-made magnesium ammine chloride can be determined. A new test procedure for water removal was proposed, by which the adsorption rate of lab-made sample was found to be approximately 100%.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.2
• /
• pp.199-207
• /
• 2015

Solid materials of ammonia sources with SCR have been considered for the application of lean NOx reduction in automobile industry, to overcome complex problems of liquid urea based SCR. These solid materials produce ammonia gas directly with proper heating and can be packaged by compact size, because of high volumetric ammonia density. Among ammonium salts and metal ammine chlorides, calcium ammine chloride was focused on this paper due to low decomposition temperature. In order to make calcium ammine chloride in lab-scale, simple reactor and glove box was designed and built with ammonium gas tank, regulator, and sensors. Basic test conditions of charging ammonia gas to anhydrous calcium chloride are chosen from equilibrium vapor pressure by Van't Hoff plot based on thermodynamic properties of materials. Synthetic method of calcium ammine chloride were studied for different durations, temperatures, and pressures with proper ammonia gas charged, as a respect of ammonia gas adsorption rate(%) from simple weight calculations which were confirmed by IC. Also, lab-made calcium ammine chloride were analyzed by TGA and DSC to clarify decomposition step in the equations of chemical reaction. To understand material characteristics for lab-made calcium ammine chloride, DA, XRD and FT-IR analysis were performed with published data of literature. From analytical results, water content in lab-made calcium ammine chloride can be discovered and new test procedures of water removal were proposed.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.448-452
• /
• 2001

An Experimental study was carried out to develop a simple method of processing copper waste sludge which is produced by PBC manufacturing. The procedure is based on leaching of wet sludge in 2N H$_2$SO$_4$, and the solid / liquid ratio is controlled approximately at 1/10. The recovery of copper is 85.4%, and pH of the leachate is 3.20. Adding ammonia solution into leachate forms ammine, and hydroxide compounds derived from other impurities in leachate at pH 10. The hydroxide compound can be treated by ferrite process, and the product is a stable oxide compound. Then the ammine solution is heated to evaporate ammonia, and the copper hydroxide is formed. Heating at 8$0^{\circ}C$by aeration, copper hydroxide is transformed into copper oxide with a purity of 98.4%. This process can recover most copper from sludge and the residue can be stabilized by the formation of a stable oxide compound which is not hazardous to environment.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.4
• /
• pp.311-313
• /
• 1996

• YAKHAK HOEJI
• /
• v.10 no.4
• /
• pp.1-6
• /
• 1966

Various thiocyanatoammine chromium complex salts are prepared by the known methods and the Rf. value of these complex salts are determined by four developers. These four developers were used in the paper chromatographical work of cobalt complex salts by Yamamoto in 1954. It was also found that the developer A (Ch$_{3}$OH, acetone, NH$_{4}$OH) gave best results of these four developers and the decending development gave better results than ascending development in this experiment. In the case of decending development using developer A, it is found that the Rf. value is increased with the number of thiocyanate radical. The reason of this curious results can be explained that the thiocyanate radical in the complex ion is more active for the organic solvent than ammine radical. Shifting of electrons to the central metal and the charge of the complex ion can also effect ot the Rf. value but much questions are remained for the explanation of the above curious phenomenon. Separation of mixed sample is also studied for various mixture of the above complex salts. In the case of the mixture of hexammine and diammine complex salt, the clear separation is possible but in almost all other mixed sample, the results are not clear. Therefore it can be said that the results of this work can be used in the qualitative analysis of the individual complex salts, except the mixed sample of hexammine and diammine complex salts.

• Journal of the Korean Chemical Society
• /
• v.29 no.5
• /
• pp.516-521
• /
• 1985

Ethylenediamine-triacetatocobalt (III) complexes with an ammine, an ethylene-diamine, and a trimethylenediamine as the unidentate ligand were prepared, and were isolated as only one isomer for each case by the Dowex 50W-X8, cation exchange resin in $H^+$ form. The geometrical isomer of these complexes have been assigned cis-equatorial form in the three possible geometrical isomers from the elemental analysis, pH titration, IR, NMR, and electronic absorption spectrum. It was found that $[CoN_3O_3]$ system of the meridional form with multidentate ligand have the first absorption band of the largely splitting pattern, and that the diamines (ethylenediamine, trimethylenediamine) have coordinated to the central cobalt (III) ion as a unidentate ligand.

• Journal of Biomedical Engineering Research
• /
• v.12 no.1
• /
• pp.57-62
• /
• 1991

ABA type block copolymers composed of poly($\gamma-benzyl$ L-glutamate) (PBLG) as the A component and poly (ethylene glycol) as the B component were obtained by polymerization of $\gamma-benzyl$ L-gletamate N -carboxyanhydride, initiated by amino groups at both ends of poly(ethylene glycol) . From circular dichroism measurements in ethylene dichloride solution as well as from infrared spectTa measurements in solid state, it was found that the polypep- tide block exists in the a-helical conformation, as in PBLG homopolymer. $Poly-N^5$ (3-hydroxypropyl glutamine) (PHPG)/poly(ethylene glycol)block copolymer hydrogel was obtained by the treatment of PBLG/PBG block copolymer with the mixture of 3-ammine-1-propanol and diamlnooctane. The water content of PHPG/PEG block copolymer hydrogel was about 80wt% when the concentration of crosslinking agent was below 5 mole % per polymer.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05a
• /
• pp.452-454
• /
• 2012

본 논문에서는 열분해 및 촉매반응의 의한 Hydrazine의 Ammonia 전환율을 연구하였다. 원자력발전소 2차 계통은 물/증기 순환계통으로 기기 및 배관의 부식을 억제하고, 증기발생기(Steam Generator, SG)의 부식생성물 유입을 최소하기 위해 전휘발성처리법(All Volatile Treatment, AVT)을 적용하여 계통수의 pH를 약염기성으로 유지하고 있다. 또한 Hydrazine을 이용하여 계통수의 용존산소제거 및 환원성 분위기를 유지하고 있다. 현재 사용되는 AVT는 대부분 단일 아민(Ammine)으로 계통 전 영역에서 pHt를 약염기성으로 유지하기 어렵다. 따라서 복합 아민을 이용하여 단일 아민의 상호단점을 보완한 수처리법을 적용해야한다. 하지만 복합 아민을 적용할 경우 추가 아민 주입설비, 설치부지, 시설유지보수 및 관리가 요구되므로 기존 주입약품을 이용하여 아민을 공급할 수 있는 연구가 필요하다. 따라서 본 연구에서는 Hydrazine의 열분해 및 촉매반응을 이용한 Ammonia 전환율을 조사하였다.

• Journal of the Korean Chemical Society
• /
• v.29 no.1
• /
• pp.38-44
• /
• 1985

Photoreaction path for the monocyanochromium (Ⅲ) ion was inferred from the experimentally observed product ratio and theoretical analysis. The angular overlap model was used to analyze the d-orbital of various intermediates along a selected reaction coordinate and to determine quartet state energy level. A loss of equatorial ammine leads to pentacoordinated square pyramid with CN- ligand in an equatorial position. The SP(CNeq) intermediate undergoes a rearrangement by the N-Cr-CN bending. This process leads to a trigonal bipyramidal intermediate in which the CN- ligand is located in equatorial position. The subsequent association with a solvent molecule should probably proceed by lateral attack an one edge of the equatorial triangle. The assumption adopted above was consistent with experimental results.

• Journal of the Korean Chemical Society
• /
• v.29 no.4
• /
• pp.348-355
• /
• 1985

Extended Huckel Calculation of cis-and trans-dichloro diammine platinum(II), dichloroethylene diamine platinum(II) and their N-mono, di, tri and tetra-methylated or ethylated ones were carried out to investigate their anticancer activity. It was found that the net charge of two chlorine atoms in cis-isomers are greater than those in trans-ones and Pt-Cl bond energies of the former are less than that of the latter, indicating that Pt-Cl bond in cis-isomers has greater ionic character than that in trans-ones and Cl atoms in the former are easier to dissociated as Cl- than those in the latter. Also, the values of $b_{2g}-b_{1g}$ energy difference, ${\Delta}_1$ were found to be greater in cis-isomers than in trans-one without exceptions. For the substitution of methyl for H atom in ammine and ethylenediamine Pt-Cl bond strength shows the tendency to increase with increasing in number of methyl group. Accordingly, We believe that two Cl atoms in $PtLCl_2$-complexes (L: NH$_3$, en) are dissociated in the first step of the action of anticancer.