• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.8
• /
• pp.663-672
• /
• 2009

In this studies, the adsorption test using Chlorella pyrenoidosa was conducted to examine the effect of Pb adsorption according to various immobilized methods such as Ca-alginate, K-carrageenan, and Polyacrylamide. From the results, the duration to need to reach adsorption equilibrium was delayed according to the immobilization. And, the higher adsorption capacity of immobilized Chlorella pyrenoidosa was represented in the higher concentration of Pb, the smaller amount of immobilizing agent, and the higher pH of solution. The maximum adsorption capacity of Pb was shown in the adsorption test using Chlorella pyrenoidosa immobilized with Ca-alginate even though it was sensitive pH. The adsorption results properly represented with Freundlich isotherm equations. And, pseudo second-order chemisorption kinetic rate equation was applicable to all the biosorption data over the entire time range. The FT-IR analysis showed that the mechanism involved in biosorption of Pb by Chlorella pyrenoidosa was mainly attributed to Pb binding of carbo-acid and amide group. Adsorbed Pb on immobilized Chlorella prenoidosa was easily desorbed in the higher concentration of desorbents(NTA, HCl, EDTA, $H_2SO_4,\;Na_2CO_3$). Among the several desorbents, NTA showed the maximum desoption capacities of Pb from Chlorella pyrenoidosa immobilized with Ca-alginate and K-carrageenan and EDTA was the most effective in Chlorella pyrenoidosa immobilized with polyacrylamide. The desoprtion efficiency in the optimum condition was 90.0, 83.0, and 80.0%, respectively.

• Applied Biological Chemistry
• /
• v.17 no.2
• /
• pp.117-124
• /
• 1974

The 23 representative bacteria were studied for the glucosamine contents which represent the glycolipid content of the cell wall. The distribution of glycolipid in various bacteria was examined and the relationship between the glycolipid contents and the Gram stain was elucidated. The results were as follows: 1. The contents of glucosamine in the glycolipid of Gram negative and variable bacterial cell wall were large ranging from the least 0.04 ${\mu}g$ of Proteus vulgaris to the largest 2.48 ${\mu}g$ of Aerobacter aerogenes. The Gram positive bacteria and only those Gram positive among Bacilli contained less than 0.02 ${\mu}g$ of glucosamine contents. The least glucosamine containing Gram positive bacteria were Corynebacterium sepedonicum and Staphylococcus aureus. It could generally be said that the Gram negative and variable bacteria contain the higher content of glucosamine in the cell wall than the positives. 2. The bacteria were better stained by the Gram solution after the extraction of glycolipid from the cell wall than those without extraction. 3. The four infrared spectra of glycolipids obtained from Aerobacter aerogenes, Bacillus circulans, Pseudomonas fluorescens, and Salmonella typhirurium showed all the similar characteristics. All showed the existence of groups; OH, C-O, C-O-C, $CH_2+CH_3$, amide band, fatty acid ester band and ester carbonyl bond.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.23 no.3
• /
• pp.92-96
• /
• 1997

Nowadays, ceramides have been found to be an important component in the outermost layer of the skin - the stratum corneum. It is undersrood that ceramides play an important role in structure and maintenance of the interellular lipid lamella structure in the SC layer. Thus, many efforts have been made by the cosmetics and pharmaceutical industries to get human skin-identical ceramides or pseudoceramides which show similar performance with natural ceramides. The purpose of our study was to systhesize new pseudoceramides via an effective and economical systhetic pathway and to show their performance of skin restoratio. Four kinds of the new pseudoceramides were synthesized by the reaction of alcoholic amine and alkyl ketene dimer. First of all, PC-4 and PC-5 were synthesized by the reaction of 3-amino-1,2-propanidiol and serinol with alkyl ketene dimer respectively. After that, PC-4R and PC-5R were produced by changign kitone group at $\beta$-position to amide bond of above synthesized PC-4 and PC-5 into hydroxyl group using NaBH4 respectively. Their expected structures were conformed by the NMR, IR spectra, and elemental analysis. A study to show the restoration effectiveness was performed in which human skin was pretreated with high concentration of SDS surfactant solution. Using 0.5% solution of above synthesized pseudoceramides, there was the significantly faster restoration of the damaged than that of placebe itself treatment.

• Polymer(Korea)
• /
• v.26 no.1
• /
• pp.28-36
• /
• 2002

In this study, we synthesized novel thiophene derivatives by the protection of the carboxyl group of 3-thiophene acetic acid with differently substituted benzyl groups. While 3-thiophene acetic acid is not electro-polymerizable, the modified monomers can be easily electro-oxidized to form stable electroactive polymers. The protecting groups can be easily removed in the solid state and the desired reactive carboxyl group can be introduced on the polymer surface. SEM observations show that obtained polymer films show a very good film surface and homogeneous morphology on the Pt electrode. After introduction of macromonomer, FT-IR spectrum shows new absorption bands at 1650 and $1550 cm^{-1}$, which is consistent with the formation of an amide bond. Electroactivity measurements were examined by cyclic voltammogram(CV). These polymers showed the characteristic electrochemical behavior of poly(3-alkylthiophene)s with reversible redox transition in the range of 0.7-0.9 V.

• Journal of Adhesion and Interface
• /
• v.3 no.3
• /
• pp.7-14
• /
• 2002

Modified polyethylenes with polar side groups of -COOK, $-CONH_2$, and -COOH were prepared at a dispersion state in water by reacting poly(ethylene-co-methylacrylate) (PEMA) with aqueous solution of KOH and ammonia. Types and their contents of side groups were investigated by infrared spectroscopy, elemental analysis and atomic absorption analysis. Solution viscosity and surface tension were also measured as a function of solid contents. Stability and transparency of the dispersions were greatly affected by the content of COOK in the side groups. The stable dispersion could be prepared at a composition of COOK of 20 mole% at least. The transparency was increased with increasing the COOK contents, but decreased with increasing the amide content at a constant composition of COOK. Solution viscosities increased abruptly at a lower solid content when the COOK contents were increased, implying higher entanglement between the chains in dispersions with higher content of hydrophilic COOK group. The dispersions of higher COOK content revealed lower surface tension values.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.6
• /
• pp.824-829
• /
• 2002

New di-N-cyanomethylated tetraaza macrocycle 2.13-bis(cyanomethyl)-5.16-dimethyl-2,6,13,17-tetraazatricyclo[$16.4.0.0^7.12$]docosane $(L^2)$ has been prepared by the reaction of 3, 14-dimethyl-2,6,13,17-tetraazatricyclo $(L^1)$ with bromoacetonitrile. The square-planar complexes $[ML^2](ClO_4)_2(M=Ni(II)$ or Cu(II) can be prepared by the reaction of $L^2$ with the corresponding metal ion in acetonitrile. The cyanomethyl groups of $[ML^2](ClO_4)_2readily$ react with water to $yield[ML^3](ClO_4)_2$ containing pendant amide groups. The trans-octahedral complexes $[ML^4](ClO_4)_2$, in which two imidate ester groups are coordinated to the metal ion, can be also prepared by the reaction of $[ML^2](ClO_4)_2with$ methanol under mild conditions. The hydrolysis and alcoholysis reactions of $[ML^2](ClO_4)_2are$ promoted by the central metal ion, in spite of the fact that the cyanomethyl group is not involved in intramolecular coordination. The reactions are also promoted by a base such as triethylamine but are retarded by an $acid(HClO_4).Interestingly$, the imidate ester groups of $[ML^4]^2$ are unusually resistant to hydrolysis even in 0.1 M $HCIO_4$ or 0.1 M NaOH aqueous solution. Crystal structure of $[NiL^4](ClO_4)_2shows$ that the Ni-N (pendant imidate ester group) bond is rlatively strong; the Ni-N bond distance is shorter then the Ni-N(tertiary) distance and is similar to the Ni-N (secondary) distance.

• Proceedings of the Korean Biophysical Society Conference
• /
• 2003.06a
• /
• pp.75-75
• /
• 2003

We report here the results on N-acetyl-N'-dimethylamide of proline (Ac-Pro-NM $e_2$) calculated using the ab initio molecular orbital method with the self-consistent reaction field (SCRF) theory at the HF level with the 6-31+G(d) basis set to investigate the conformational preference of polyproline depending on the cis/trans peptide bonds and down/up puckerings along the backbone torsion angle $\square$ in the gas phase, chloroform, and water. In the gas phase, Ac-Pro-NM $e_2$ has seven local minima of tFd, tFu, cFd, cFu, cAu, tAu, and cAd conformations. In particular, polyproline conformations tFd, tFu, cFd, and cFu are found to be more stable than $\square$-helical conformations cAu, tAu, and cAd. In contrast, Ac-Pro-NHMe has seven local minima of tCd, tCu, cBd, cAu, tAu, cFd, and cFu conformations. Conformations tCd and tCu are found to be most stable, which is ascribed to the intramolecular hydrogen bond between C=O of acetyl group and $N^{~}$ H of N'-methyl amide group. The stability of the cFd conformation (i.e., the polyproline I structure) in chloroform is somewhat increased, relative to that in water, although tFd and tFu conformations (i.e., the polyproline II structure) are dominate both in chloroform and water. The population of backbone conformations feasible in chloroform and water is consistent with the experiments. This work is supported by a Korea Research Foundation Grant (KRF-2002-041-C00129).

• Journal of The Korean Dental Society of Anesthesiology
• /
• v.4 no.1 s.6
• /
• pp.13-16
• /
• 2004

Background: Articaine, a new amide-type local anesthetic, was recently commercially available in Korea. The purpose of this study was to compare the anesthetic efficacy between articaine HCl and lidocaine HCl for the surgical extraction of bilateral mandibular impacted third molars. Patients and Methods: Forty young and healthy patients with bilateral impacted third molars were selected with permission. Randomly, one side of impacted third molar was operated under local anesthesia using 4% articaine and the other side under 2% lidocaine after 1 or 2 week recovery time. Intraoperative pain was evaluated via 0-10 cm visual analog scale (VAS) by both the patient and operator immediately after the operation. After 1 day and 7 days, the complications of local anesthesia were checked. Results: The pain VAS scores in articaine group, evaluated by both the patient and operator, were lower than those in lidocaine group, but they were not statistically significant (P = 0.44 and 0.54, respectively). The incidence of complications of local anesthesia between articaine and lidocaine was similar. Conclusion: In this study, articaine showed at least equal efficacy compared to lidocaine. The further dose-controlled study with more pharmacokinetic parameters will be needed.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.6 no.2
• /
• pp.75-91
• /
• 2020

[^99mTc]Tc-Hexamethylpropylene amine oxime (HMPAO) is currently used as a regional cerebral blood flow imaging agent for single photon emission computed tomography (SPECT). The HMPAO ligand exists in two isomeric forms: d,l and meso showing different properties in vivo. Later studies indicated that brain uptake patterns of ^99mTc-complexes formed from separated enantiomers differed. Separation of enantiomers is difficult by fractional crystallizations method. Usually, the substance is obtained in low chemical yield in a time-consuming procedure. Furthermore, the final product still contains some impurity. So we have developed new efficient route for synthesis of R,R- and S,S-HMPAO enantiomeric compounds in 6-steps. Nucleophilic substitution (S_N2) reactions of 2,2-dimethylpropane-1,3-diamine either with S- (1a) or R-methyl2-chloropropanoate (1b) were performed to produce compounds R,R- (2a) or S,S-isomer (2b) derivatives protected with benzylchloroformate (Cbz), respectively. And then Weinreb amide and methylation reaction using Grignard reagent, oxime formation with ketone group and deprotectiion of Cbz group by hydrogenolysis gave S,S- (7a) or R,R-HMPAO (7b), respectively. Entaniomeric compounds were synthesied with high yield and purity without any undesired product. The 7a or 7b kits containing 10 ㎍ SnCl₂-2H₂O were labeled with ^99mTc with high radiolabeling yield (90%).

• Korean Journal of Food Science and Technology
• /
• v.32 no.5
• /
• pp.1158-1167
• /
• 2000

To produce ${\beta}-cyclodextrin({\beta}-CD)$, a cyclodextrin glucanotransferase(CGTase) producing Aspergillus sp. CC-2-1 was isolated from soil. The enzyme was purified and its enzymological characteristics were investigated. It was found that production of CGTase reached to the maximum when the wheat bran medium containing 0.1% albumin, 2% $(NH_4)_2S_2O_8$, 2% soluble starch and 0.2% $KH_2PO_4$ was cultured for 5 days at $37^{\circ}C$. The purity of CGTase was increased by 13.14 folds after DEAE-cellulose ion exchange chromatography and Sephadex G-100, G-150 gel filtration and the specific activity was 172.14 unit/mg. Purified enzyme was confirmed as a single band by the polyacrylamide gel electrophoresis. The molecular weight of CGTase was estimated to be 27,800 by Sephadex G-100 gel filtration and SDS-polyacrylamide gel electrophoresis. The optimum pH and temperature for the CGTase activity were 9.0 and $80^{\circ}C$, respectively. The enzyme was stable in pH $8.0{\sim}11.0$ at $60{\sim}80^{\circ}C$. The activity of purified enzyme was activated by $K^+,\;Cu^{2+}$ and $Zn^{2+}$. The activity of the CGTase was inhibited by the treatment with 2,4-dinitrophenol and iodine. The result suggests that the purified enzyme has phenolic hydroxyl group of tyrosine, histidine imidazole group and terminal amino group at active site. The reaction of this enzyme followed typical Michaelis-Menten kinetics with the $K_m$ value of 18.182 g/L with the $V_{max}$ of 188.68 ${\mu}mole/min$. The activation energy for the CGTase was calculated by Arrhenius equation was 1.548 kcal/mol.