• 대한환경공학회지
• /
• 제37권6호
• /
• pp.380-386
• /
• 2015

조선소 밀집지역의 휘발성유기화합물 농도의 공간 및 시간적 분포특성을 측정하였으며 이를 기반으로 지역적 특성을 평가하였다. 모든 시료채취지점에서 측정된 주요 휘발성유기화합물은 조선소 내부의 실내도장시설에서 측정된 물질들과 밀접한 연관성을 가지는 것으로 나타나 조선소 내부에서 이루어지는 도장작업이 주변지역의 휘발성유기화합물의 중요한 배출원임을 보여준다. 휘발성유기화합물의 분포를 결정하는 주된 요인들은 시료채취지점과 선박제조 작업장 사이의 거리와 선박제조 작업의 강도인 것으로 나타났다. 모든 시료채취지점에서 일반적인 도시 대기에서 관찰되는 VOCs 농도의 일반적인 시계열적 변화경향을 압도하는 도장작업의 강도에 따라 매우 넓은 범위의 휘발성유기화합물 농도가 관찰되었다.

• 한국입자에어로졸학회지
• /
• 제9권3호
• /
• pp.187-197
• /
• 2013

To understand the characteristics of organic aerosol(OA) at the background atmosphere of Korea, an observation of atmospheric PM10 was conducted at a Global Atmospheric Watch(GAW) station operated by the Korean Meteorological Administration at Anmyon Island during 2010. Various organic compounds were analyzed from 26 samples by using a gas chromatography-mass spectrometer. Water soluble organic carbon(WSOC) was also analyzed by using a total organic carbon(TOC) analyzer. Among 6 classes with 68 target compounds detected, the classes of n-alkanoic and alkenoic acids ($326.67{\pm}75.40ngm^{-3}$) and dicarboxylic acids ($323.74{\pm}361.89ngm^{-3}$) were found to be major compound classes in the atmosphere of Anmyon Island. Compared to the previous results reported for 2005 spring samples at Gosan site, the concentrations of organic compounds at Anmyon Island were 3-10 times higher than Gosan site due to the difference of location and sampling period. The concentrations of organic compounds were varied with the atmospheric conditions. Significant increase of the concentrations of dicarboxylic and carboxylic acids in the smog episode indicated that secondary oxidation of organic compounds was major factor to increase OA concentration during smog episode in the Anmyon Island. It was found that the compositions of the OA measured at Anmyon Island were dependent on the air parcel trajectories.

• 한국식품영양과학회지
• /
• 제20권3호
• /
• pp.272-275
• /
• 1991

저장온도 상대습도 그리고 열품건조전 $25^{\circ}C$에서 가용성 전분용액(1~3%;w/v)에 30분간 침지 처리가 저장시 분말양파의 caking과 수분흡수에 미치는 효과를 조사하였다. 항습조건(70% RH)에서 저장온도가 $15^{\circ}C에서\;35^{\circ}C$로 올라감에 따라서 분말양파의 caking현상은 증가되었다. 항온조건($25^{\circ}C$)에서 저장습도가 70% RH에서 90% RH로 높아짐에 따라서 분말양파의 caking 현상 또한 증가하였다. 저장습도 증가(70~90% RH)가 저장온도증가($15~35^{\circ}C$)에 비하여 분말양파의 caking현상에 보다 큰 영향을 미쳤다. 가용성 전분의 전처리를 거친 분말양파는 $25^{\circ}C,\;70^{\circ}C$의 저장조건하에서 무처리 분말양파에 비하여 수분흡습과 caking현상을 줄일 수 있었다. 3%의 가용성 전분액에서 전처리 시킨 후 건조시킨 분말양파는 $25^{\circ}C$와 70% RH 조건하에서 180분간 저장시킨 결과 무처리 분말양파에 비하여 약 80%의 caking 현상을 줄일 수 있었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 춘계학술대회
• /
• pp.827-830
• /
• 2011

본 논문에서는 풍향 풍속 계측모듈 및 DSP 센서인터페이스 회로시스템을 제안한다. 이 DSP 시스템은 풍향 풍속모듈, 대기압센서, 대기 온도 센서의 정보를 받아들이고, 빠르게 처리하여 PC 모니터링 시스템에 전달한다. 특히 풍향 풍속 모듈과 DSP 하드웨어는 직접 설계하여 적용한다. 풍향 풍속 모듈은 바람에 관한 벡터적 정보를 얻기 위해 4개의 박막형 RTD(Resistive Temperature Detectors) 또는 박박형 피에조센서를 원기둥 모양의 지지표면에 벡터적으로 배치하는 구조를 채택한다. 이 구조를 채택한 계측 모듈은 진동, 습기, 부식 등에 강인하면서 정확한 계측을 가능케 한다. 센서 신호처리 회로는 TI 사의 고속 DSP인 TMS320F2812 를 사용한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.624-627
• /
• 2003

The BLT thin-films were one of the promising ferroelectric materials with a good leakage current and degradation behavior on Pt electrode. The BLT target was sintered at $1100^{\circ}C$ for 4 hours at the air ambient. $Bi_{3.25}La_{0.75}Ti_3O_{12}$ (BLT) thin-film deposited on $Pt/Ti/SIO_2/Si$ wafer by rf magnetron sputtering method. At annealed $700^{\circ}C$, (117) and (006) peaks appeared the high intensity. The hysteresis loop of the BLT thin films showed that the remanent polarization ($2Pr=Pr^+-Pr^-$) was $16uC/cm^2$ and leakage current density was $1.8{\times}10^{-9}A/cm^2$ at 50 kV/cm with coersive electric field when BLT thin-films were annealed at $700^{\circ}C$. Also, the thin film showed fatigue property at least up to $10^{10}$ switching bipolar pulse cycles under 7 V. Therefore, we induce access to optimum fabrication condition of memory device application by rf-magnetron sputtering method in this report.

• 대한기계학회논문집
• /
• 제19권5호
• /
• pp.1319-1332
• /
• 1995

Numerical analysis was performed to characterize the particle deposition behavior on a horizontal free-standing wafer with thermophoretic effect under the turbulent flow field. A low Reynolds number k-.epsilon. turbulence model was used to analyze the turbulent flow field around the wafer, and the temperature field for the calculation of the thermophoretic effect was predicted from the energy equation introducing the eddy diffusivity concept. The deposition mechanisms considered were convection, diffusion, sedimentation, turbulence and thermophoresis. For both the upper and lower surfaces of the wafer, the averaged particle deposition velocities and their radial distributions were calculated and compared with the laminar flow results and available experimental data. It was shown by the calculated averaged particle deposition velocities on the upper surface of the wafer that the deposition-free zone, where the deposition velocite is lower than 10$^{-5}$ cm/s, exists between 0.096 .mu.m and 1.6 .mu.m through the influence of thermophoresis with positive temperature difference of 10 K between the wafer and the ambient air. As for the calsulated local deposition velocities, for small particle sizes d$_{p}$<0.05 .mu.m, the deposition velocity is higher at the center of the wafer than at the wafer edge, whereas for particle size of d$_{p}$ = 2.0 .mu.m the deposition takes place mainly on the inside area of the wafer. Finally, an approximate model for calculating the deposition velocities was recommended and the calculated deposition velocity results were compared with the present numerical solutions, those of Schmidt et al.'s model and the experimental data of Opiolka et al.. It is shown by the comparison that the results of the recommended model agree better with the numerical solutions and Opiolka et al.'s data than those of Schmidt's simple model.

• 대한기계학회논문집B
• /
• 제20권5호
• /
• pp.1671-1678
• /
• 1996

In external chemical vapor deposition processes including VAD and OVD the distribution of flame-synthesized silica particles is determined by heat and mass transfer limitations to particle formation. Combustion gas flow velocities are such that the particle diffusion time scale is longer than that of gas flow convection in the zone of particle formation. The consequence of these effects is that the particles formed tend to remain along straight smooth flow stream lines. Silica particles are formed due to oxidation and hydrolysis. In the hydrolysis, the particles are formed in diffuse bands and particle formation thus requires the diffusion of SiCl$\_$4/ toward CH$\_$4//O$\_$2/ combustion zone to react with H$\_$2/O diffusing away from these same zones on the torch face. The conversion kinetics of hydrolysis is fast compared to diffusion and the rate of conversion is thus diffusion-limited. In the language of combustion, the hydrolysis occurs as a Burke-Schumann process. In selected conditions, reaction zone shape and temperature distributions predicted by the Burke-Schumann analysis are introduced and compared with experimental data available. The calculated centerline temperatures inside the reaction zone agree well with the data, but the calculated values outside the reaction zone are a little higher than the data since the analysis does not consider diffusion in the axial direction and mixing of the combustion products with ambient air. The temperatures along the radial direction agree with the data near the centerline, but gradually diverge from the data as the distance is away from the centerline. This is caused by the convection in the radial direction, which is not considered in the analysis. Spatial distribution of silica particles are affected by convection and diffusion, resulting in a Gaussian form in the radial direction.

• 대한기계학회논문집B
• /
• 제40권2호
• /
• pp.85-91
• /
• 2016

내연기관 자동차와 달리 전기자동차는 배터리 폐열이 부족하여 실내 난방을 위해 추가적으로 PTC 히터를 사용하고 있지만 전력소모가 큰 단점이 있다. 최근 이러한 단점을 보완할 수 있는 히트펌프 적용에 관한 연구가 활발히 진행되고 있다. 본 연구에서는 히트펌프의 운전특성 해석을 위해 MATLAB/SIMULINK$^{(R)}$환경에서 R134a 히트펌프 모델과 캐빈 모델을 개발하였다. 모델은 여름과 겨울에서 히트펌프의 작동 특성에 따른 실내 온도변화를 나타낼 수 있으며, 모델 검증은 구성품 수준에서 응축기와 증발기의 용량 비교를 수행하였다. 또한 동일한 냉방조건에서 캐빈온도 변화 비교를 통해 캐빈 모델을 검증하였다. 해석 결과 전동압축기 소비전력은 모든 외기온도 조건에서 PTC 히터 보다 낮은 것으로 나타났다. 또한 영하조건에서 히트펌프의 난방용량이 부족한 현상에 대해 폐열회수를 적용하여 효율적인 난방 작동을 할 수 있는 조건을 분석하였다.

• The Plant Pathology Journal
• /
• 제34권3호
• /
• pp.236-240
• /
• 2018

Crop yield is critically related to the physiological responses and disease resistance of the crop, which could be strongly affected by high temperature conditions. We observed the changes in the growth of barley under higher than ambient air-temperature conditions using a temperature gradient field chamber (TGFC) during winter and spring. Before the stem extension stage of barley growth, Cladosporium sp. spontaneously appeared in the TGFC. The severity of disease became serious under warmer temperature conditions. Further, the stomata closed as the severity of the disease increased; however, stomatal conductance at the initial stage of disease was higher than that of the normal leaves. This was likely due to the Iwanov effect, which explains that stressed plants rapidly and transiently open their stomata before longer-term closure. In this study, we tested three optical methods: soil-plant analysis development (SPAD) chlorophyll index, photochemical reflectance index (PRI), and maximum quantum yield (Fv/Fm). These rapid evaluation methods have not been used in studies focusing on disease stress, although some studies have used these methods to monitor other stresses. These three indicative parameters revealed that diseased barley exhibited lower values of these parameters than normal, and with the increase in disease severity, these values declined further. Our results will be useful in efficient monitoring and evaluation of crop diseases under future warming conditions.

• 대한기계학회논문집B
• /
• 제35권6호
• /
• pp.593-601
• /
• 2011

다양한 작동 조건에서 고분자 전해질형 연료전지의 성능 변화를 예측하기 위한 해석 프로그램을 구성하여 열관리가 시스템의 성능에 미치는 영향을 해석하였다. 전체 시스템은 연료전지 스택, 공기공급계, 연료공급계, 열 관리계로 구성 되었으며 각 구성부의 설계점을 고려하여 열역학적 모델링을 적용 하였다. 외기온 변화와 냉각 시스템의 성능 변화에 따라 연료전지 스택의 온도 및 출력 변화가 예상되므로 탈설계 해석을 하여 전체 시스템의 성능 변화를 예측하였다.