• Korean Journal of Food Science and Technology
• /
• v.28 no.1
• /
• pp.184-189
• /
• 1996

A scavenger of superoxide anion radical which causes oxygen toxicity was isolated from Capsella bursa-pastoris, and its physicochemical properties were investigated. The scavenger was isolated and purified by solvent fractionation and liquid column chromatographies (Amberlite XAD-2, Sephadex LH-20, Bio gel P-2, ODS (silica gel with 100% octadecyl silanization)). An active compound of 0.25 g was finally isolated by Fast Protein Liquid chromatography (FPLC) from 100 g ethanol extract of Capsella bursa-pastoris. A 50% decrease of superoxide anion radical was obtained with the scavenger compound of 0.58 g. The compound was assumed to be a phenolic glycoside from its physicochemical properties.

• The Korean Journal of Pesticide Science
• /
• v.11 no.2
• /
• pp.87-94
• /
• 2007

Pyrethroid insecticide have widely been used for agricultural sector and residential environments. To assess the exposure of insecticide which is absorbed through skin the analysis of urinary metabolite is essential. At present, the urinary 3-PBA was analyzed using liquid-phase extraction. But LPE have many limitations, such as long pre-treatment time and low recovery. So, this study was conducted to determine the optimum conditions for analysing 3-PBA in urine using solid phase extraction. Furthermore, this study intend to investigate the relation of concentrations of pyrethroid, deltamethrin in air and 3-PBA in urine. The optimum condition for hydrolysis was found to be done with hydrochloric acid for one hour. The recovery rates of 3-PBA were $84.6%{\pm}1.2%$, $54.8{\pm}0.9%$, $99.8{\pm}1.2%$ with XAD-2, XAD-7, XAD-16 using as the aborbents and acetone as eluents respectively. But acetonitrle and methanol gave low recovery rate and methyl cellosolve could not elute the compound. The amount of acetone for elution were 6mL, 9mL, 3mL for XAD-2, XAD-7, XAD-16 as absorbents respectively. The non-absorbed rates was $0.8{\pm}0.5%$, and $0.7{\pm}0.3%$ under XAD-16, mesh size 140-200, amount of resin 1.4g and the flow rate of eluent was 0.1mL/min. In the concentration process, we obtained 11 times higher concentration of material. The amounts of urinary 3-PBA were. The LODs of 3-PBA and deltamethrin were 0.004 mg/L, 0.038 mg/L, respectively. The further research of minute monitoring which include spray pattern, environmental condition is needed And more research about the relation between total pyrethroid exposure and urinary various metabolite are also necessary.

• Analytical Science and Technology
• /
• v.9 no.3
• /
• pp.279-291
• /
• 1996

The new chelating resins, XAD-2, 4, 16-TAC and XAD-2, 4, 16-TAO were synthesized by Amberlite XAD-2, XAD-4, and XAD-16 macroreticular resins with 2-(2-thiazolylazo)-p-cresol(TAC) and 4-(2-thiazolylazo)orcinol(TAO) as functional groups and were characterized by elemental analysis and FT-IR spectrometry. It was found that the content of functional group in chelating resin was 0.60mmol/g in XAD-16-TAC and 0.68mmol/g in XAD-16-TAO respectively. The chelating resins were stable in acidic and alkaline solution and can be reused over 10 times. The sorption behavior of some metalions to two chelating resins was investigated by batch method, which included batch equilibrium, effect of pH, coexisting ions and masking agent. For the optimum condition of sorption, the time required for equilibrium was about 1 hour and optimum pH was 5. In the presence of anions such as ${SO_4}^{2-}$ and $CH_3COO^-$, the sorption of U(VI) ion was slightly reduced but other anions such as $Cl^-$ and $NO{_3}^-$ revealed no interference effect. Also, sorption capacity of U(VI) ion was decreased by addition of $CO{_3}^{2-}$ ion because of complex formation of $[UO_2(CO_3)_3]^{4-}$, but alkali metals and alkali earth metals including Na(I), K(I), Mg(II), and Ca(II) were not affected for the sorption extent. Masking agent, NTA showed better separation efficiency of U(VI) ion from coexisting metal ions such as Th(IV), Zr(IV), Hf(IV), Cu(II), Cd(II), Pb(II), Ni(II), Zn(II) and Mn(II) than EDTA, CDTA.

• Korean Journal of Agricultural Science
• /
• v.36 no.2
• /
• pp.225-232
• /
• 2009

The ratio of saccharification and formation of furans during the acid hydrolysis of agar with oxalic acid and sulfuric acid were examined base on the contents of the agar and acids. The ratio of saccharification in oxalic acid appeared to be 51~59% somewhat higher than 49~61% of sulfuric acid. Formation of the furans during the acid hydrolysis increased proportional to the contents of agar and acid. The relative formation ratio was high 10~47% for furfural (FUR) and 15~29% for hydroxy-methyl furfural (HMF) in 0.5~1.25% sulfuric acid rather than those of oxalic acid. When comparing the removal efficiency of the furans using an alkali treatment, steam stripping and hydrophobic resins, FUR was eliminated 60% by the alkali treatment, 62~90% by steam stripping and 71~75% by Amberlite XAD4 and 7HP, while HMF was removed to low levels of 10.5%, 4~17% and 13~25%, respectively. The loss of reducing sugar was also observed in process of the removal of furans, and the loss rate was the level of 2~4% in alkali treatment, 11~16% in steam stripping and 7~9% in Amberlite resins.

• Journal of Environmental Health Sciences
• /
• v.31 no.3
• /
• pp.221-226
• /
• 2005

Isoflavone was extracted with various concentration of aqueous methanol using whole hypocotyls as the starting material. Whole hypocotyls were preferred as the raw material because the residue could be easily removed from the solvent after the extraction process. Extraction yield was almost constant at the methanol concentration of $20-80\%$. Most of the isoflavone was extracted within 1 hr, and the extraction yield remained almost constant thereafter. When the concentration of methanol was $80\%$, the content of total solid was reduced due to the reduced extraction of contaminating protein as the result of protein insolubilization. Among resins tested, Diaion HP-20, Amberlite XAD-16, and Amberlite IRC-50 showed the highest capacity to absorb the compound. Open column chromatography with Diaion HP-20 showed that $80\%$ aqueous ethanol was most efficient as the eluting solvent with final recovery of the phytochemical being more than $95\%$. Maximum adsorption of the phytochemical occurred at the acidic pH 2-4. When the spatial velocity was increased to 15 and more, the degree of adsorption was decreased, whereas below spatial velocity of 15, the adsorption capacity of isoflavone to the resin was almost constant. The purity of the isoflavone purified by column chromatography was $78\%$.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.11
• /
• pp.1789-1791
• /
• 2008

This study was aimed (i) to develop an effective method for the purification of ginsenosides for industrial use and (ii) to compare the distribution of ginsenosides in cultured wild ginseng roots (adventitious root culture of Panax ginseng) with those of red ginseng (steamed ginseng) and white ginseng (air-dried ginseng). The crude extracts of cultured wild ginseng roots, red ginseng, and white ginseng were obtained by using a 75% ethanol extraction combined with ultrasonication. This was followed sequentially by AB-8 macroporous adsorption chromatography, Amberlite IRA 900 Cl anion-exchange chromatography, and Amberlite XAD16 adsorption chromatography for further purification. The contents of total ginsenosides were increased from 4.1%, 12.1%, and 11.3% in the crude extracts of cultured wild ginseng roots, red ginseng, and white ginseng to 79.4%, 71.7%, and 72.5% in the final products, respectively. HPLC analysis demonstrated that ginsenosides in cultured wild ginseng roots were distributed in a different ratio compared with red ginseng and white ginseng.

• Journal of Microbiology and Biotechnology
• /
• v.8 no.5
• /
• pp.478-483
• /
• 1998

For the enhanced production of a cardiac glycoside, digoxin, using in situ adsorption by biotransformation from digitoxin in plant cell suspension cultures, selection of proper resins was attempted and the culture conditions were optimized. Among various kinds of resins tested, Amberlite XAD-8 was found to be the best for digoxin production in considering adsorption characteristics as well as the effect on cell growth. Adequate time for resin addition was determined to be 36 h from the beginning of biotransformation and the presence of resins should be as short as possible to increase the productivity. In addition, to prevent the cells from direct contact with resin particles, immobilized systems were designed and examined. Immobilization further improved the advantages of in situ adsorption. It was confirmed that the increase of the contact area for mass transfer was an important factor in utilizing an immobilized system to enhance digoxin production.

• Proceedings of the Botanical Society of Korea Conference
• /
• 1995.06a
• /
• pp.79-90
• /
• 1995

Production of a cardiac glycoside, digoxin, by 12$\beta$-hydroxylation from digitoxin was studied in plant cell suspension cultures of Digitalis lanata. In order to increase the conversion yield, various culture conditions including immobilization were investigated and optimized. Since digoxin was released in the medium temporarily and converted further into a glucosylated product, deacetyllanatoside C, in situ adsorption of digoxin was employed to recover the product continuously. Amberlite resin XAD-8 showed the best adsorption characteristics for digoxin among the examined resins, and an integrated process was developed to increase the productivity. In addition, it was found that the utilization of $\beta$-cyclodextrin to entrap digoxin during the culture enhanced the biotransformation yield significantly.

• Microbiology and Biotechnology Letters
• /
• v.21 no.6
• /
• pp.600-608
• /
• 1993

About 1, 300 strains isolated from soil were evaluated for acyl-CoA:cholesterol acyltransferase (ACAT) inhibition activity. About 4.0% of actinomycetes and 3.6% of fungi showed greater than 50% inhibition activity, respectively. However, none of the isolated bacteria exhibited inhibition activity more than 50%. Among them, one Streptomyces sp. A-3 showed a higher ACAT inhibition activity in culture broth. Isolation of the ACAT inhibitor (AI-3) was achieved by Amberlite XAD-7 column, silica-gel column, Sephadex LH-20 gel-filtration and reverse phase HPLC.

• Journal of the Korean Society of Tobacco Science
• /
• v.14 no.1
• /
• pp.79-86
• /
• 1992

Free and glycosidically bound volatiles from three green tobacco leaves(NC 82, KF 109 and Br-21) were separated by nonionic resin Amberlite XAD-2 adsorption column chromatography and election by selective solvents. Aglycones from the glycosidically bound fractions were released by enzymatic hydrolysis with almond B-glucosidase. A total of 20 components identified from free and glycosidically bound fractions, the major components were benzaldehyde, benzyl alcohol, 2-phenylethyl alcohol, 3-oxo- -ionol, 3-hydroxy-B-ionone, 3-oxo-7, 8-dihydro-n-ionol and scopoletin. Six Cl.B norisoprenoids identified in this study, which have been described to possess a characteristic tobacco aroma-enhancing effect, were not presented in free forms but rather bound glycosidic forms.