• Korean Journal of Agricultural Science
• /
• v.43 no.3
• /
• pp.496-505
• /
• 2016

The purpose of this study was to investigate the economic effects of a flame retardant aluminum screen developed by a company Economic effects were analyzed in terms of micro and macro-economic aspects. In the macro-economic aspect, economic effects were analyzed under the assumptions that the total import volume of flame retardant aluminum screen was approximately $50m^2$ in 2015 and that possible import substitution rates were 100%, 80%, and 60%. Results showed economic values of 2.25 billion won (100% import substitution rates), 1.8 billion won (80% import substitution rates), and 1.35 billion won (60% import substitution rates). If existing farms which had been using imported flame retardant aluminum screen replaced it newly developed with the flame-retardant aluminum screen developed in this study at rates of 100%, 80%, and 60%, the farms could save 750 million won, 60 million won, and 45 million won, respectively. Furthermore, the social cost savings from fire prevention could be 1.184 billion won. In the micro-economic aspect, if a farm with a typical-size ($1,000m^2$) greenhouse growing red pepper wanted to install flame retardant aluminum screen instead of generic aluminum screen, the farm may only pay an additional cost of 720,000 won. In comparison, if the farm chose fire insurance instead of flame-retardant aluminum screen, then the farm would pay 21,000,000 won for fire insurance. The above results show that the economic effect of flame retardant aluminum screen developed by the company would be be very efficient compared to the imported one.

• Journal of Sensor Science and Technology
• /
• v.19 no.6
• /
• pp.421-427
• /
• 2010

Alizarin Red S modified screen printed carbon electrodes were developed for the electrochemical detection of aluminum ion. The electrodes developed use screen-printed carbon electrodes(SPCEs) coupled with chemical modification with an organic chelator, Alizarin Red S(ARS), for aluminum ion detection in aqueous solution. For sensor fabrication ARS was directly immobilized on the surface of SPCEs using PVA-SbQ(The poly(vinyl alcohol) bearing stryrylpyridinium groups). Aluminum concentrations were indirectly estimated by amperometric determination of the non-complexed ARS immobilized on the electrodes, after its complexation with aluminum. The sensitivity of the sensor developed was $3.8\;nA{\mu}M^{-1}cm^{-2}$ and the detection limit for aluminum was $25\;{\mu}M$.

• Horticultural Science & Technology
• /
• v.33 no.2
• /
• pp.227-232
• /
• 2015

This experiment was carried out to investigate the effects of shading materials (aluminum specific-shading screen and polypropylene non-woven fabric) and shading ratio (50% and 70%) on climatic changes, cut-flower quality, and yield of spray rose cultivars for export during high temperature periods. The daily cumulative solar radiations were higher with the aluminum specific-shading screen, especially with 50% shading compared to polypropylene non-woven fabric. Air temperature and root zone temperature within rockwool media greatly decreased with the aluminum specific-shading screen, but relative air humidity was not different among shading methods. Chlorophyll contents (SPAD values) were slightly higher with aluminum-specific shading screen than with polypropylene non-woven fabric, and were higher with 50% than with 70% aluminum specific-shading screen. Except for 'Lovely Lydia', marketable and exportable yields of all cultivars were higher with 50% than with 70% aluminum shading treatment. In addition, flowers talk length, stem diameter, number of node and 7ea-leaflet, and floret number tended to be better with aluminum specific-shading screen. Flower stalk length was higher with 70% than with 50% aluminum shading treatment. Chromaticity of petals slightly increased, and vase life was 0.5-2.5 days longer for each cultivar with aluminum specific-shading screen than with polypropylene non-woven fabric.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.34-39
• /
• 2011

Screen printing method is a common way to fabricate the crystalline silicon solar cell with low-cost and high-efficiency. The screen printing metallization use silver paste and aluminum paste for front and rear contact, respectively. Especially the rear contact between aluminum and silicon is important to form the back surface filed (Al-BSF) after firing process. BSF plays an important role to reduces the surface recombination due to $p^+$ doping of back surface. However, Al electrode on back surface leads to bow occurring by differences in coefficient of thermal expansion of the aluminum and silicon. In this paper, we studied the properties of mono crystalline silicon solar cell for rear electrode with aluminum and aluminum-boron in order to characterize bow and BSF of each paste. The 156*156 $m^2$ p-type silicon wafers with $200{\mu}m$ thickness and 0.5-3 ${\Omega}\;cm$ resistivity were used after texturing, diffusion, and antireflection coating. The characteristics of solar cells was obtained by measuring vernier callipers, scanning electron microscope and light current-voltage. Solar cells with aluminum paste on the back surface were achieved with $V_{OC}$ = 0.618V, JSC = 35.49$mA/cm^2$, FF(Fill factor) = 78%, Efficiency = 17.13%.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2000.10a
• /
• pp.340-345
• /
• 2000

This study was carried out to analyze the light and thermal environment in model greenhouse using infrared absorption film as shading screen and to compare with the case of no shading and using general shading screen such as aluminum foil-backed film, black polyethylene film and thermal blanket. PPFD(photosynthetic photon flux density) of inside the model greenhouse under infrared absorption film was increased by 22% than under general shading screen on the average. And temperature of inside air under infrared absorption film was 2$^{\circ}C$ lower than under general shading screen on the average. So, it is expected that infrared absorption film is useful as shading screen.

• Journal of Korean Vacuum Science & Technology
• /
• v.6 no.3
• /
• pp.120-125
• /
• 2002

The aim of the present work is to optimized the annealing parameter in both front and back screen printed contacts realization on p-type multicrystalline silicon and with phosphorus diffused. The RTA treatments were carried out at various temperatures from 600 to 850$\^{C}$ and annealing time ranging from 3 min to 5 min in air, O$_2$and N$_2$ ambiance. The contacts parameters are obtained according to Transmission Line Model measurements. A good RTA cycle is obtained with a temperature plateau of 700$\^{C}$-750$\^{C}$ and annealing ambiance of air. Several processing parameters required for good cell efficiency are discussed with an emphasis placed on the critical role of the glass frit in the aluminum paste. A anamolus behaviour of Aluminum n-doping on p-type Si wafer, contact at high temperature have also been studied.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.10
• /
• pp.894-900
• /
• 2000

The experimental study for performance improvement of aluminum/freon22 grooved heat pipe was carried out. Arterial wick was used for performance improvement of heat pipe. The experimental result was compared with screen covered grooved wick heat pipe. And also, performance test of grooved wick thermosyphon inserted straight wire in the center of grooved pipe was carried out. This result was compared with the performance test result of grooved wick thermosyphon. The operation limit of artery inserted grooved heat pipe was slightly extended, but thermal resistance of this heat pipe was twice as large as that of screen covered grooved heat pipe. In case of thermosyphon, the operation limit of grooved thermosyphon inserted straight wire in the center of grooved pipe was slightly extended, but thermal resistance was increased, comparing with that of the grooved thermosyphon.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.5
• /
• pp.179-183
• /
• 2008

Employing screen printing technology, aluminum is applied to the back side of the n-type silicon wafer to see the effect of the heat treatment parameters on the Voc of the solar cell, Heat treatment at $850^{\circ}C$ produces the highest Voc among various heat treatment conditions. Heat treatment at the temperatures higher than $850^{\circ}C$ results in lower Voc, which is due to the destruction of the Al-Si alloy emitter layer. The destruction of Al-Si layer observed to be caused by the vigorous movement of silicon atoms toward aluminum layer during the heat treatment.

• Journal of Biomedical Engineering Research
• /
• v.43 no.4
• /
• pp.219-229
• /
• 2022

In this study, we propose a miniaturized micro-ceramic heater device. After screen-printing a silver paste between pre-sintered two aluminum oxide plates to integrate a heating circuit, the device was fabricated through a low-temperature sintering process. In order to configure the optimal heating circuit integration condition, the output current evaluation and heating test were performed according to the number of screen prints of the silver paste at various voltages. A silver paste-based heating circuit printed with a line width of 200 ㎛ and a thickness of 60 ㎛ was successfully integrated on a pre-sintered alumina substrate through a low-temperature sintering process. In the case of the 5 times printed device, the thermal response showed a response rate of 18.19 ℃/sec. To demonstrate feasibility of the proposed device in the medical field, such as bio-tissue suturing and hemostasis, a voltage was applied to pig tissue in the device to test tissue change due to heat generated from the device. These results show the possibility that the proposed small ceramic heater could be used in the medical field based on its excellent temperature response.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.53.2-53.2
• /
• 2010

In this study, we focused on our specialized electrode process for Si back-contact crystalline solar cell. It is different from other well-known back-contact cell process for thermal aspect and specialized process. In general, aluminum makes ohmic contact to the Si wafer and acts as a back surface reflector. And, silver is used for low series resistance metal grid lines. Aluminum was sputtered onto back side of wafer. Next, silver is directly patterned on the wafer by screen printing. The sputtered aluminum was removed by wet etching process after rear silver electrode was formed. In this process, the silver paste must have good printability, electrical property and adhesion strength, before and after the aluminum etching process. Silver paste also needs low temperature firing characteristics to reduce the thermal budget. So it was seriously collected by the products of several company of regarding low temperature firing (below $250^{\circ}C$) and aluminum etching endurance. First of all, silver pastes for etching selectivity were selected to evaluate as low temperature firing condition, electrical properties and adhesive strength. Using the nano- and micron-sized silver paste, so called hybrid type, made low temperature firing. So we could minimize the thermal budget in metallization process. Also the adhesion property greatly depended on the composition of paste, especially added resin and inorganic additives. In this paper, we will show that the metallization process of back-contact solar cell was realized as optimized nano-paste characteristics.