• 대한기계학회논문집A
• /
• 제27권10호
• /
• pp.1686-1694
• /
• 2003

The foam-filled tube beams can be used for the front rail and firewall structures to absorb impact energy during frontal or side collision of vehicles. In the case of side collision where bending is involved in the crushing mechanism, the foam filler would be effective in maintaining progressive crushing of the thin-walled structures so that much impact energy could be absorbed. In this study, bending behaviors of the closed-cell-aluminum-alloy-foam-filled stainless steel tube were investigated. The various foam-filled specimens including piecewise fillers were prepared and tested. The aluminum-alloy-foam filling offered the significant increase of bending resistance. Their suppression of the inward fold formation at the compression flange as well as the multiple propagating folds led to the increase of load carrying capacity of specimens. Moreover, the piecewise foams would provide the easier way to fill the thin-walled shell structures without the drawback of strength.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.388-393
• /
• 2004

A comprehensive numerical study on the three point bending behavior of Aluminum foam-filled stainless steel tube has been performed. Aluminium alloy foams with various densities were produced and their mechanical properites were evaluated. Finite element(FE) analysis of three point bending test was performed to evaluate bending behavior of foam filled cylindrical structures. Results showed that foam filling offered remarkable increase of bending resistance and enhanced the crashworthiness of the structure. It turned out to prevent the inward fold formation at the compression flange, resulted into the multiple propagating folds and increased the load carrying capacity.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제15권1호
• /
• pp.17-24
• /
• 2007

An experimental investigation was carried out for 4 different types of the aluminum foam heat sinks which were inserted into the annulus. The purpose of this study is to examine the feasibility of a heat sink with high performance forced convective water cooling in the annulus. The local wall temperature distribution, inlet and outlet pressures and temperatures, and heat transfer coefficients were measured for heat flux of 13.6, 18.9, 25.1, 31.4 $kW/m^2$ and Reynolds number ranged from 120 to 9,000. Experimental results show that the departure from the Darcy's law is evident from the pressure loss and the friction factor is much higher while the significant enhancement in Nusselt number is obtained, and average Nusselt number of aluminum foam with high pore density is much higher than that of aluminum foam with low pore density. Correlations for the friction factor is proposed and used for design of thermal applications.

• 대한기계학회논문집A
• /
• 제39권10호
• /
• pp.971-977
• /
• 2015

발포금속은 우수한 물리적 특성과 역학적 성능 때문에 많은 첨단기술 분야에 널리 사용되고 있다. 폐쇄형 알루미늄 폼은 발포금속 중에 하나이며, 우수한 충격에너지 흡수하는 성능 때문에 자동차와 항공기에 많이 쓰이고 있다. 본 연구에서는 폐쇄형 알루미늄 폼의 충격 실험을 통해 두께에 따른 기계적 특성을 분석하였으며, 검증으로 시뮬레이션 해석을 하였다. 시뮬레이션 해석 방법으로서는 ANSYS 를 이용하여 실험과 똑 같은 경계조건으로 유한요소해석을 진행하였다. 실험과 해석의 결과들을 비교해보면 10mm, 20mm, 30mm 인 경우에 20mm 인 경우는 제일 효율적인 것으로 사료된다. 20mm 의 경우가 시험편의 두께에 비하여 세가지 모델들의 경우에 있어 충격 에너지의 흡수가 가장 큰 것으로 나타났다. 본 연구의 결과들을 이용하면, 알루미늄 폼으로 된 기계 구조물의 개발에 필요한 자료를 제공할 수 있을 것으로 사료된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.582-585
• /
• 2012

The aluminum extruded panel used for a high speed train shows the largest contribution to sound insulation performance of the train body. However, comparing with the flat panel having the same weight, the transmission loss falls sharply in the local resonance frequency band. Such fall of transmission loss can be improved by increasing the damping of local resonance. This study examines the charging effect of an urethane foam on the aluminum extruded panel of a high speed train. We charged the urethane foam with different mass density and in different way in the core part of the extruded panel. We measure the transmission loss and compare the sound insulation performance according to the density and charging method. Finally, Improvement effect of the transmission loss is compared and analysed in aspect of weight increment.

• 대한기계학회논문집B
• /
• 제26권3호
• /
• pp.417-422
• /
• 2002

The experiments have been carried out to evaluate the cooling performance of a fan-aluminum foam heat sink assembly in comparison with a conventional CPU cooler. In terms of the dimensionless surface temperature of the heater, the cooling performance of the aluminum foam heat sink is similar to that of the conventional one with much reduced weight. The optimum fin height is found to be strongly dependent on the fin height of the heat sink and flow characteristics of the cooling fan.

• 소성∙가공
• /
• 제20권8호
• /
• pp.555-561
• /
• 2011

The energy absorbing characteristics of crash members in a car collision play an important role in controlling the amount of damage to the passenger compartment. Crash members filled with aluminum foam are expected to have reduced mass while maintaining or even improving the crashworthiness compared to the conventional hollow-beam types. Finite element simulations are carried out in the present work to assess the improvement of crashworthiness by the use of aluminum foam fillers. The numerical results agreed well with experimental measurements. Parametric studies are conducted to analyze the effect of impact velocity, weld strength, and initiator on the crash response.

• 설비공학논문집
• /
• 제17권9호
• /
• pp.855-862
• /
• 2005

An experimental investigation has been carried out for aluminum foam heat sink inserted into the annulus to examine the feasibility as a heat sink for high performance forced water cooling in the annulus. The local wall temperature distribution, inlet and outlet pressures and temperatures, and heat transfer coefficients were measured for heat flux of 13.6, 18.9, 25.1, 31.4 $kw/m^2$ and Reynolds number ranged from 120 to 2000. Experimental results show that the friction factor is higher than clear annulus without aluminum foam, while the significant augmentation in Nu is obtained. This technique can be used for the compactness of the heat exchanger.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.425-426
• /
• 2007

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.521-522
• /
• 2007