• Journal of Environmental Science International
• /
• v.12 no.11
• /
• pp.1189-1196
• /
• 2003

The effect of boron and aluminum on the development of adventitious roots was studied in sunflower cuttings. Three-day-old seedlings were de-rooted and grown in nutrient solutions with or without boron and supplemented with different concentrations (from 50 to 700 ${\mu}$M) of aluminum. The number and length of the adventitious roots and proline content in adventitious roots in response to insufficient boron and aluminum stress were determined periodically. The micronutrient boron caused the development of numerous roots in the lower parts of the hypocotyl. A dose-response of boron-induced rooting yielded an optimum concentration of 0.1 mM boron. In the absence of boron, in the majority of the adventitious roots, a significant inhibition was observed with or without aluminum, indicating that the most apparent symptom of boron deficiency is the cessation of root growth. Increasing concentrations of aluminum caused progressive inhibition of growth and rooting of the hypocotyls, and a parallel increase in proline levels of adventitious roots. Supplemental boron ameliorated the inhibitory effect of aluminum, suggesting that aluminum could inhibit root growth by inducing boron deficiency. Ascorbate added to medium in the absence of boron improved root growth and induced a significant decrease in proline levels. These findings suggest that adventitious root growth inhibition resulting from either boron deficiency or aluminum toxicity may be a result of impaired ascorbate metabolism.

• Resources Recycling
• /
• v.18 no.6
• /
• pp.18-23
• /
• 2009

An investigation on the synthesis of aluminum citrate, one of the aluminum organic compounds, has been performed using aluminum chloride solutions as a starting material. For the synthesis of aluminum citrate, citric acid was added to aluminum solutions with the mole ratio of citric acid to aluminum to be 2.5 and aluminum citrate synthesized was also characterized in terms of chemical analysis, X-ray diffraction, particle size measurement and SEM analysis. As a result, it was found that the ratio of ethanol/Al solution more than 4.0 was required for the synthesis of aluminum citrate from aluminum solutions. Furthermore, the pH should be controlled to be more than 7.0 in order to obtain the recovery of aluminum citrate higher than 97%. From the chemical analysis of aluminum citrate synthesized in this work, the content of $NH_4$, Al and C was found to be 17.0, 4.01 and 25.7%, respectively. Accordingly, the aluminum citrate synthesized from aluminum solutions was confirmed to be $(NH_4)_5Al(C_6H_4O_7)_2{\cdot}2H_2O$.

• Journal of Korea Foundry Society
• /
• v.33 no.1
• /
• pp.22-31
• /
• 2013

In order to develop an aluminum alloy, that can combine high thermal conductivity and good castability and anodizability, aluminum alloys with low Si content, such as Al-(0.5~1.5)Mg-1Fe-0.5Si and Al-(1.0~1.5)Si-1Fe-1Zn, were designed. The developed aluminum alloys exhibited 170~190% thermal conductivity (160~180 W/mK), 60~85% fluidity, and equal or higher ultimate tensile strength compared with those of the ADC12 alloy. In each developed alloy system, the thermal conductivity decreased and the strength increased with the increment of Mg and Si, which are the significant alloying elements. The fluidity was in reverse proportion to the Mg content and in proportion to the Si content. The Al-(0.5~1.5)Mg-1Fe-0.5Si alloys exhibited better fluidity in thick-wall castings, while the Al-(1.0~1.5)Si-1Fe-1Zn alloys were better in thin-wall castability due to their lower surface energies. The fluidity behavior was complexly affected by the heat release for the solidification, viscosity, solidification range, and the type, quantity, and formation juncture of the main secondary phase.

• Journal of Preventive Medicine and Public Health
• /
• v.32 no.2
• /
• pp.200-205
• /
• 1999

Objectives: This study was carried out to investigate the aluminum concentrations in blood, urine and drinking water, the factors which affect the concentrations and the role of silicon in patients who were taking antacid containing aluminum. Methods: We selected 122 peptic ulcer patients as cases and 144 healthy examinees as controls. Blood, urine, and drinking water were collected from the each study subject and we measured aluminum concentrations as well as silicon concentrations in the specimens. The factors including silicon affect on the aluminum concentrations were also analyzed, Results: 1. The mean duration of antacid administration was 12 months, and the mean daily and total amount of aluminum administration were 0.9 g and 304 g per each patient, respectively. 2. The blood and urine aluminum concentrations were significantly higher in the case. 3. The blood silicon concentration was significantly lower in the control group, and the urine silicon concentration was significantly higher in the case. 4. Urine aluminum concentration was significantly correlated with blood aluminum concentration (r=0.18), and urine silicon concentration was correlated with blood aluminum (r=0.19) and urine aluminum concentrations (r=0.13). 5. The longer the duration of antacid administration and the larger the total and daily amount of aluminum in the antacid were, the higher urine aluminum and silicon concentrations were, but not to a statistically significant degree. Conclusions: Blood and urine aluminum concentrations were higher in the ulcer patients. The authors suggest that follow-up studies of the patients who administered antacid with high aluminum content for long duration should be done.

• Resources Recycling
• /
• v.20 no.2
• /
• pp.54-59
• /
• 2011

An investigation on the synthesis of aluminum tartrate, one of the aluminum organic compounds, has been performed using aluminum chloride solution as a raw material. For this aim, the effect of the ratio of ethanol/Al solution and pH on the synthesis of aluminum tartrate has been examined and aluminum tartrate synthesized has also been characterized in terms of the chemical composition, X-ray diffraction pattern, particle size distribution, and SEM analysis. As a result, the synthesis more than 97% could be obtained under the conditions of pH more than 3.0 at the ratio of ethanol/Al solution of 3.0. From the chemical analysis of aluminum tartrate synthesized in this work, the content of $NH_4$, Al and C was found to be 9.10, 4.83 and 25.8%, respectively. In addition, aluminum tartrate synthesized from the aluminum chloride solution was found to be $(NH_4)_3Al(C_4H_4O_6)_3$.

• Journal of Korea Foundry Society
• /
• v.38 no.5
• /
• pp.87-94
• /
• 2018

The effects of Sr and (Ti-B) additives on the tensile properties of AC4A recycled (35% scrap content) aluminum alloys were investigated. An acicular morphology of the eutectic Si phase of as-cast specimens was converted to a fibrous morphology upon the addition of Sr. Moreover, morphology of the Sr modified eutectic Si phase became finer due to a T6 heat treatment. The grain size of the ${\alpha}$-solid solution was decreased by the addition of (Ti-B) additives. Depending on the treatment conditions of the as-cast specimens, i.e., no addition, a Sr addition and a (Ti-B)+Sr addition, the tensile strength levels of the as-cast specimens were 182, 192, and 204MPa, respectively. The corresponding strengths of T6 heat-treated specimens were 293, 308, and 318MPa. Elongations of the as-cast specimens were 2.2, 3.1, and 5.6%, and the corresponding elongations of the T6 heat-treated specimens were 4.6, 6.1, and 7.6%. The percentage of the reduced section area in the tensile specimens was also increased by the Sr and (Ti-B) additives. Sr and (Ti-B) additives changed the microstructure and the distribution of defects in the castings, resulting in an improvement of the tensile properties of AC4A aluminum alloys. According to our test results, recycled (35% scrap content) AC4A aluminum alloy met all of the KS requirements of the tensile strength and elongation values of AC4A aluminum alloy except for the elongation value of the one specimen condition, in this case the as-cast no-addition condition.

• Korean Journal of Metals and Materials
• /
• v.56 no.11
• /
• pp.805-812
• /
• 2018

High pressure die casting is one of the precision casting methods. It is highly productivity and suitable for manufacturing components with complex shapes and accurate dimensions. Recently, there has been increasing demand for efficient heat dissipation components, to control the heat generated by devices, which directly affects the efficiency and life of the product. Die cast aluminum alloys with high thermal conductivity are especially needed for this application. In this study, the influence of elements added to the die cast aluminum alloy on its thermal conductivity was evaluated. The results showed that Mn remarkably deteriorated the thermal conductivity of the aluminum alloy. When Cu content was increased, the tensile strength of cast aluminum alloy increased, showing 1 wt% of Cu ensured the minimum mechanical properties of the cast aluminum. As Si content increased, the flow length of the alloy proportionally increased. The flow length of aluminum alloy containing 2 wt% Si was about 85% of that of the ALDC12 alloy. A heat dissipation component was successfully fabricated using an optimized composition of Al-1 wt%Cu-0.6 wt%Fe-2 wt%Si die casting alloy without surface cracks, which were turned out as intergranular cracking originated from the solidification contraction of the alloy with Si composition lower than 2 wt%.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.255-263
• /
• 2006

In order to measure the acoustic amplification factor of an Al/HTPB propellant, T-burner tests using pulsed DB/AB method were conducted. In the experiment, powdered aluminum content was varied to a certain extent. Simultaneous ignition on the internal surface of a propellant was achieved by the use of a fast ignition disk. From the experimental data, the damping factor for a non-zero aluminum content could not be calculated due to the fast attenuation of perturbed pressure. Therefore, the addition of aluminum particle was more than sufficient to stabilize pressure-coupled instability.

• Journal of Ginseng Research
• /
• v.39 no.4
• /
• pp.414-417
• /
• 2015

Background: The aim of this study was to evaluate the effects of Korean Red Ginseng marc with aluminum sulfate as litter amendments on ammonia, soluble reactive phosphorus, and pathogen populations in poultry litters. Methods: Increasing levels of Korean Red Ginseng marc with aluminum sulfate were applied onto the surface of rice hull as a top-dress application; untreated rice hulls served as controls. Results: Treatment with Korean Red Ginseng marc with aluminum sulfate or aluminum sulfate alone resulted in lower litter pH (p < 0.05), as compared with that of the controls. There were some differences (p < 0.05) between treatments with Korean Red Ginseng marc with aluminum sulfate or aluminum sulfate alone and controls at 2-4 wk (not at 1 wk). Ammonia levels reduced on an average by 29%, 30%, and 32% for 10 g, 20 g Korean Red Ginseng marc with aluminum sulfate, and aluminum sulfate alone, respectively, as compared with controls at 4 wk. During the experiment, Korean Red Ginseng marc with aluminum sulfate or aluminum sulfate treatment had an effect (p < 0.05) on soluble reactive phosphorus content, as compared with the controls (not at 4 wk). A decrease in Salmonella enterica and Escherichia coli was observed (p < 0.05) in litter amended with both Korean Red Ginseng marc with aluminum sulfate and aluminum sulfate alone, as compared with the control, except at 1-3 wk for Salmonella enterica and 1 wk and 4 wk for Escherichia coli, respectively. Conclusion: The results showed that using Korean Red Ginseng marc with aluminum sulfate (blends), which act as acidifying agents by reducing the pH of the litter, was equally effective as aluminum sulfate in reducing the environmental impact.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.231-232
• /
• 2006

Aluminum Alloys with a content of 22 wt.-% $Mg_2Si$ were spray formed. This alloy features by a low density and is therefore a superior material for leightweight applications. The main problem in spray forming of this type of alloy was the occurance of high porosities. First process optimizations have been performed to decrease porosity under a certain level, so that it can be closed by an extrusion process