• 제목/요약/키워드: aluminum compound

검색결과 158건 처리시간 0.021초

Y 정수장 세라믹막 여과공정 최적 운영인자 평가 (The Study on Optimum Operation Conditions of Ceramic MF Membrane Process in Y Water Treatment Plant)

  • 유상준;안효원;박성한;임재림;홍성철;이병인
    • 멤브레인
    • /
    • 제24권3호
    • /
    • pp.201-212
    • /
    • 2014
  • 본 연구는 국내 최초로 도입된 Y 정수장의 세라믹막 고도정수처리를 위한 최적 운영 인자를 도출하기 위하여 수행되었다. 경제성과 수질조건을 만족하면서도 세라믹막 여과성능을 지속 유지할 수 있는 최적 운영조건을 도출한 결과, Y 정수장의 평상시 수질 조건에서 막역세척으로 인한 배출수 발생량을 최소화시키면서도 막여과성능을 유지할 수 있는 최적 여과지속시간(역세척 주기)은 시설용량($16,000m^3$/일) 기준 시 4.0시간으로 조사되었다. 또한 화학세척(CIP)에 따른 막차압 회복력을 조사한 결과, 구연산을 이용한 산세정을 통하여 철, 망간, 알루미늄 등의 막 파울링을 일으키는 무기오염물질은 제거되지만 막회복률은 낮았다. 반면 차아염소산나트륨을 사용한 알칼리 세정을 통해서는 막 운영 초기 막차압으로 회복되는 것으로 나타났다. 막차압을 발생시키는 파울링 주요 원인물질은 친수성 고분자 유기오염물인 polysaccharides로 조사되었으며, 화학세척(CIP)시 막성능 회복률은 세척약품 온도에 의한 영향이 매우 크며, 온도가 높은수록 막성능 회복률이 향상되는 것으로 조사되었다.

VOC Analyzer를 이용한 목재용 도료의 휘발성유기화합물의 간이측정 (Test Method Using VOC Analyzer to Measure VOC Emission of Paints for Wood-based Panel)

  • 엄영근;김기욱;안재윤;김현중;문석중
    • Journal of the Korean Wood Science and Technology
    • /
    • 제35권6호
    • /
    • pp.65-72
    • /
    • 2007
  • VOC Analyzer는 공기 중에 포함되어 있는 VOC (휘발성 유기화합물) 중 toluene, ethyl benzene, xylene, styrene 등 4가지 방향족 탄화수소 가스 농도를 측정하는 측정 장비이다. 검출기에는 고감도 반도체 가스센서를 사용한 가스크로마토그래피방식으로써 캐리어 가스로서는 봄베공기를 사용한다. 또한, 대기 중에 포함되어 있는 다양한 가스성분을 농축하지 않고 VOC를 분리 검출하여 농도를 편리하면서도 자세하게 측정할 수 있으므로 건축자재, 페이트, 도료, 접착제 등에서 응용될 수 있다. 이러한 장점을 가진 VOC Analyzer를 이용하여 목재에 주로 사용되는 도료로부터 VOC 방사거동을 확인하였다. 실험은 시편을 밀봉하여 실험개시 후 일정시간 간격으로 48시간까지 측정하였다. 수용성 페인트와 enamel 페인트의 VOC 방산량은 lacquer와 urethane vanish에 비해 상대적으로 적었으며 4개의 샘플 중에서 lacquer의 VOC 방산량이 가장 높게 나타났다. VOC Analyzer를 이용한 측정법은 현재 사용되고 있는 VOC 측정방법 중 가장 빠르고 경제적인 기술이기 때문에 앞으로 널리 사용된 것이라 기대된다.

부산지역 의료기관의 흉부촬영 조건과 피폭선량에 관한 조사연구 (A Study on Radiographical Conditions and Exposure Doses During Chest Radiography at Medical Facilities in Pusan)

  • 전성오;조영하
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제20권2호
    • /
    • pp.49-55
    • /
    • 1997
  • This study was carried out to investigate radiographical and operating conditions of X-ray units and exposure doses to patients during chest radiography, so that the results could provide basic data used for reducing the exposure dose and for providing the diagnostic information with better quality. The conditions and exposure doses of 100 X-ray units mainly used for chest radiography were examined and also 100 radiological technologists mainly handling those apparatus at 76 medical facilities in Pusan were surveyed using a questionnaire from October 1 to December 31 in 1995. The following results were obtained from the study : 1. It was found that most units were capable of taking a high tube voltage radiography by showing 67% of the units equipped with the maximum tube voltage of 150 kV, 94% with more than 500 mA for the rating capacity and 85% with the full wave type of a signal phase. 2. For actual chest radiographical conditions, however, 80% of the units were operated at $60{\sim}100\;kVp$ and only 14% at 100 kVp and over for the high tube voltage. 3. The average exposure time was less than 0.1 second, and eighty four percent of the units adapted the X-ray tube currents ranging from 200 to 300 mA, 80% the focus-film distances between 180 and 210 cm, and 63% the focus sizes of more than 2.0 mm. 4. Most units(98%) employed additional filters made of aluminum, 75% the thickness of filters less than 2.0 mm, and only 2 units the compound filters. 5. Ortho chromatic system was only adopted in 13% of screen film system for the units, and 73% used the grid ratio at 8 : 1 for the low tube voltage during chest radiography. 6. The average exposure dose of all X-ray units during chest radiography was $371\;{\mu}Sv$ with a difference of about 16 times between the minimum to the maximum, and $386\;{\mu}Sv$ both at hospitals and at health centers, followed by $380\;{\mu}Sv$ at general hospitals and $263\;{\mu}Sv$ at university hospitals without showing any statistically significant differences. In conclusion, since patients during chest radiography at medical facilities in Pusan exposed to high levels of radiation, it is recommended that appropriate added filters and grids necessary for the high tube voltage radiography and high-speed screen systems should be adopted and used as soon as possible in order to reduce exposure dose to the patients.

  • PDF

식이아연(食餌亞鉛)이 흰쥐의 조직중(組織中) 미양금속(微量金屬)에 미치는 영향(影響) (Studies on Effect of Dietary Zine on Tissue Trace Elements in the Rat)

  • 석영건
    • Journal of Nutrition and Health
    • /
    • 제5권2호
    • /
    • pp.91-103
    • /
    • 1972
  • Zinc is one of the essential trace elements in the living organism for growth and health. The first identified metalloenzyme, carbonic anhydrase, is a zinc compound and several others have been described since. Among zinc deficiency syndromes in animals porcine parakeratosis has been successfully treated with zinc supplements, and in man a syndrome of anemia, hypogonadism, hepatosplenomegaly, and dwarfism, prevalent in parts of Iran and Egypt, has been ascribed to lack of zinc in the diet. Dietary zinc excess in the rat is manifested by a hypochromic, microcytic anemia, poor growth, reduction in liver catalase and cytochrome oxidase. The present study is an attempt to delineate the changes of tissue contents of trace elements, especially of iron, copper and zinc in liver and kidneys of the rats. Weanling albino rats, weighing 60 to 80gm. were used in this experiments. The rats were housed in cages with aluminum floors and received feed and distilled water ad libitum. Animals were divided into three groups, control, low zinc diet and high zinc diet groups. The high zinc diet group was subdivided into 0.5% Zn and 0.7%Zn groups. The supplementary copper or iron was added to the high dietary zinc groups. The animals were sacrificed and the tissues were washed several times with deionized water. The wet digested samples were analyzed by Hitachi Model 207 atomic absorption spectro-photometer for the determination of iron, copper and zinc in the liver and kidney. Hemoglobin level in the blood was measured by cyanmethemoglobin method. The results of this study are as follows: 1) All rats fed high zinc diets and low zinc diets gained less weight than control. Weight gain was not improved by the supplementary copper or iron and both. 2) Hemoglobin concentration was decreased significantly in the rats fed high zinc diets and less in the low zinc diet. Supplementary copper and iron to the higher zinc diet appeared to give some improvement of anemia. 3) The iron contents of the liver and kidneys were significantly decreased in the high zinc groups and the reduction was more significantly in the rats receiving higher zinc diet (0.7%). The supplementary copper caused a further depression of liver iron. On the other hand, the iron, added to the high zinc diet lessoned the severity of the decrease in liver iron and caused kidney iron to be maintained almost at the level found in the rats fed by zinc and supplementary copper diet. 4) High zinc diets did not change copper content of the liver and kidney. Supplementary copper elevated the concentration in the liver and kidney and added iron had no effect on the accumulation of copper in the liver and kidneys. 5) The high zinc diets caused marked increases of zinc content in the liver and kidney. Supplementary iron to the high zinc diet caused increases of zinc contents of liver and kidneys.

  • PDF

치매유발물질인 염화알루미늄으로 손상된 C6 신경교종 세포주에서의 항산화 효과 (Antioxidative Effect of Aster yomena (Kitm.) Extract on C6 Glioma Cell Line Damaged by AlCl3, Dementia Inducer)

  • 서영미
    • 대한임상검사과학회지
    • /
    • 제52권4호
    • /
    • pp.408-416
    • /
    • 2020
  • 본 연구는 치매유발물질의 하나인 염화알루미늄(AlCl3)의 신경독성을 C6 glioma세포를 배양하여 조사하였으며, AlCl3의 독성에 대한 쑥부쟁이[Aster yomena (Kim.), AY] 추출물의 보호효과를 조사하였다. 또한, 세포생존율을 비롯하여 항산화능 분석인 XO 저해능과 SAR-소거능을 조사하였다. 그 결과 AlCl3는 배양 세포에 처리한 농도에 비례적으로 세포생존율을 유의하게 감소시켰다. 이 과정에서 XTT50값이 130.0 μM로 나타나 Borenfreund와 Puerner의 독성판정기준에 의하여 중간독성(mid-cytotoxic)으로 나타났다. 한편, 항산화제인 QU는 AlCl3의 독성으로 손상된 세포생존율을 유의하게 증가시켰다. 또한, AlCl3의 독성에 대한 AY 추출물의 방어효과에 있어서, AY 추출물은 AlCl3만의 처리에 비하여 세포생존율을 유의하게 증가시켰으며, 이와 동시에 XO 저해능과 SAR-소거능과 같은 항산화 효과를 나타냈다. 이상의 결과로부터 AlCl3의 독성에 산화적 손상이 관여하고 있으며, AY 추출물은 항산화 효과에 의하여 AlCl3의 독성을 효과적으로 방어하였다. 따라서, AY 추출물과 같은 천연물질은 질환유발제인 AlCl3와 같이 산화적 손상과 관련이 있는 중금속화합물의 독성 완화나 질환의 치료적 개선을 위한 대체물질개발에 있어 유용한 소재인 것으로 생각된다.

피막 형성제를 이용한 즉각 리프팅 기술 개발 (Development of Immediate Face Lifting Technology for Reducing Wrinkles by Using Film-Forming Agent)

  • 전지현;고은아;한상근;강학희
    • 대한화장품학회지
    • /
    • 제44권3호
    • /
    • pp.211-218
    • /
    • 2018
  • 즉각 리프팅 화장품은 피부 표면에 주름을 펴주는 다양한 필름 형성제를 함유하고 있다. 그러나 대부분의 필름 형성 고분자는 점착성이 있으며, 피부에 문지르면 밀려 나오는 현상이 있다. 본 연구에서는 신속한 박막 형성 효과가 있는 규산나트륨이 피부 표면에 미치는 영향 및 즉각적인 주름 감소 효과에 초점을 두었다. 물유리 또는 가용성 유리로도 알려진 규산나트륨은 산화나트륨과 실리카를 함유한 화합물이다. 규산나트륨은 물에 쉽게 용해되어 알칼리성 용액을 생성하는 흰색 분말이다. 규산나트륨은 중성 및 알칼리성 용액에서 안정적이며, 규산나트륨 용액은 공기 중에서 건조되어 경화되고 박막을 신속하게 형성한다. 해당 용액을 피부에 도포할 경우, 물 증발 및 이온 결합 재형성에 의해 얇은 막이 형성된다. 또한 피부 표면에 강한 실록산(Si-O) 결합을 형성한다. 이러한 고착성을 화장품에 적용하면 탁월한 피부 수축 효과를 나타낼 수 있다. 규산나트륨 용액은 적절한 농도로 배합될 경우, 피부에 필름을 형성하여 리프팅 효과를 제공할 수 있다. 그러나 높은 농도의 규산나트륨이 적용될 경우, 피부 자극을 일으킬 수 있다. 본 연구에서는 끈적임이 없고, 밀림 현상이 없는 피부 탄력 관리 제형을 개발하기 위해 규산나트륨의 농도 및 다른 고정제와의 바람직한 조합을 연구했다. 규산나트륨과 다양한 증점 시스템을 사용하여 즉각적인 리프팅 효과가 있는 젤 제형을 개발했다. 다양한 증점제 중에서 알루미늄 마그네슘 실리케이트는 단시간에 느껴지는 리프팅 효과를 위해 규산나트륨과 가장 우수한 상용성을 지닌다. 즉각적인 물리적 리프팅 젤은 피부 임상 시험을 통해 낮은 자극성을 지니고 있음을 확인했다.

더덕 함량이 더덕 침출주의 품질에 미치는 영향 (The Effect of Deodeok Contents on the Quality of Deodeok Wine)

  • 권동진;최신양
    • 한국식품저장유통학회지
    • /
    • 제14권4호
    • /
    • pp.414-418
    • /
    • 2007
  • 더덕 함량을 10, 15 및 20% (w/v)로 달리하여 50% (v/v) 주정에 담아 밀봉한 후 상온에서 180일간 침출시킨 다음 더덕 침출주의 이화학적 및 관능적 특성에 미치는 영향을 조사하였다. 더덕 함량을 달리하여 상온에서 180일간 침출시킨 결과 총당은 더덕 함량이 많을수록 많은 양의 총당이 용출되는 경향을 보이고 있었으며 맛을 결정하는 환원당도 총당과 유사한 경향을 보이고 있었다. 한편 더덕의 유효성분인 total polyphenol의 경우 더덕 함량이 많을수록 차이는 뚜렷하였으나 원료 더덕 중에 함유된 total polyphenol에 비해 적은 양이 용출되고 있었다. 관능적인 기호도의 측도인 노란색의 경우 더덕 함량이 20% (w/v)인 침출주에서 가장 높은 값을 보이고 있었고 crude saponin은 비교적 완만히 용출되는 경향을 보이고 있었으나 침출 100일경이 지나면서 급격히 용출되는 경향을 보이고 있었다. 더덕 침출주의 주세법 기준 항목인 불휘발성분의 경우 더덕 20% (w/v) 함유 침출주만이 침출 160일이 지나야 법적 기준치인 2.0% (w/v) 이상을 만족하는 것으로 나타나 더덕 침출주를 제조하기 위해서는 더덕 2.0% (w/v) 이상 필요하고 침출시간도 상온에서 160일 이상 요구되는 것으로 나타났다. 관능적인 기호도에서는 더덕 20% (w/v)이상 함유된 침출주에서 맛, 향, 색 및 전체적인 기호도에서 우수한 것으로 나타났다. 이상의 결과로부터 더덕 침출주를 제조하기 위해 더덕 함량을 20% (w/v) 이상 함유하여야 불휘발성분의 법적 기준인 2.0% (w/v)를 만족하는 것으로 나타나 앞으로 품질이 우수한 더덕 침출주를 제조하기 위해 더덕 함량, 침출시간 및 온도 등의 침출방법을 결정하는 연구가 필요한 것으로 나타났다.a}$,24S)-stigmast-5-en-3-ol (${\gamma}-sitosterol$)은 감귤이나 버섯 균사체에서 보고되지 않은 성분들이 검출되었다.M 영상 역시 oxide island 들이 형성에 기인된 어떤 "Strawberry" 구조를 보여주었으나 정확하게 $Al_2O_3$ overlayer가 형성되었는지는 규명할 수 없었다. 결론적으로, 800 K와 1000 K에서 $Ni_3Al(111)$ 합금표면위의 산소 상호작용결과 어떤 aluminum oxide overlayer의 island들이 성장됨을 확인할 수 있었다.q/g$이 검출되었다. 고방사능 폐수지의 평균 $^{14}C/^3H$비는 28로 저방사능 폐수지의 0.70에 비해 높게 나타났으며, $^{14}C$$^3H$의 농도는 서로 비례하는 경향을 보였다.보완대책이 필요하다는 사실을 이 성적을 통하여 비로소 확인할 수 있었다.가정교과교육학 문항내용의 포괄성을 살펴보면 다음과 같다. 가정과교육과정 문항내용은 제7차 교육과정 문서상에 표면적으로 제시된 내용에 한정되어 있어 구체적인 개선방안으로 교육과정의 철학적 이론적 배경, 다양한 교육과정 원리를 활용하는 문항내용 등과 같이 좀 더 이론적이고 원론적인 내용으로의 확대를 제안하였다. 가정과교수학습법 문항내용은 특정 교수학습모형에 관련된 지식을 묻는 내용으로 주로 출제되었다. 이에 구체적인 개선방안으로 특정 교수학습모형의 이론적 토대가 되고 전체적인 교수설계를 하기 위한 기본 바탕이 될 수 있는 교수학습이론에 관한 내용, 또한 현재가정과교육에 있어서 유용한 교수학습법이라고 입증되고 있는 실천적 추론 가정과 수업에 관한

페인트 도장의 역사를 통해 본 6·25전쟁 운용 헬기의 도료분석 (Analysis of Paint Used for a Helicopter Operated in the Korean War through the History of Paint Application)

  • 강현삼;장한울;최양호
    • 박물관보존과학
    • /
    • 제29권
    • /
    • pp.133-152
    • /
    • 2023
  • 야외에 위치한 대형 군사문화유산의 장기적 보존을 위해 선행연구를 참고하여 과거에 이루어진 도료를 통한 도장 기술의 역사를 살펴보았으며, 전쟁기념관 소장 H-13 헬기의 분석 결과와 비교하였다. 선행연구에서 제2차 세계대전에 참여하여 지상에서 발굴된 난파기 3점에서 샘플을 수집해 분석한 결과, 항공기의 각 샘플에서 크롬의 다양한 화학적인 상태의 특성이 보호 코팅에 대한 역할 수행을 확인할 수 있었다. 약 80년이 지나 도료층의 변질과 자연환경에 장기간 노출되었는데도, 이 화합물은 1940년도 초에 부식 억제 안료로서 테스트 되었으며, 수분에 저항력을 갖는 훌륭한 억제력을 제공했다. 이런 이유로 항공 산업에서 알루미늄 합금의 부식 억제제로 널리 사용되었다. 즉 부식을 방지하기 위해 가장 널리 사용되는 재료는 크롬산염을 함유한 유기 프라이머였다. 본 연구에서 6·25전쟁에 운용되었던 H-13 헬기의 도료분석을 토대로 두 번째 층인 프라이머가 산화크롬(Cr2O3)을 포함하고 있음을 보여준다. 또한 적색의 사산화삼납(Pb3O4)을 전색제에 녹여 사용한 것으로 추정된다. 이를 선행연구와 비교한 결과 크롬산염이 제공하는 부식 방지 기능이 여전히 유효한지 여부를 명확히하는 데 도움이 될 수 있다. 적외선 분광분석 결과는 알키드 수지(Alkyd Resin)의 도료가 사용되었다. 향후 보다 다양한 유물과의 비교를 통해 합금을 부식으로부터 보호하기 위한 도료의 제작 기술 변화를 해석할 수 있을 것으로 기대된다.