• Membrane and Water Treatment
• /
• 제13권4호
• /
• pp.183-189
• /
• 2022

This study seeks towards an optimal way to control sulfate ions in semiconductor wastewater effluent with potential eco-toxicity. We developed a system based on ettringite (Ca₆Al₂(SO₄)₃(OH)₁₂·26H₂O). The basic idea is that the pH of the water is raised to approximately 12 with Ca(OH)₂. After, aluminium salt is added, leading to the precipitation of ettringite. Lab-scale batch and continuous experiment results with real semiconductor wastewater demonstrated that 1.5 and 1 of stoichiometric quantities for Ca²⁺ and A³⁺ with pH above 12.7 could be considered as the optimal operation condition with 15% of sludge recycle to the influent. A mixed AlCl₃ + Fe reagent was selected as the beneficial Al³⁺ source in ettringite process, which resulted in 80% of sludge volume reduction and improved sludge dewaterability. The results of continuous experiment showed that with precipitation as ettringite, sulfate concentration can be stably reduced to less than 50 mg/L in effluent from the influent 2,050 ± 175 mg/L on average (1,705 ~ 2,633 mg/L).

• Environmental Engineering Research
• /
• 제20권4호
• /
• pp.392-396
• /
• 2015

This work aims to investigate the oily wastewater treatment by the electrocoagulation-flotation (ECF) and propose a mathematical model for the efficiency prediction. Cutting oil was used to prepare the synthetic oily wastewater with submicron droplet sizes. The chemical coagulation by aluminium sulfate was firstly tested following by the electrocoagulation-flotation with aluminium electrodes. Both processes gave the effective treatment performance with the efficiencies higher than 90%. However, the ECF consumed less aluminium dosage as well as produced less sludge, which were its advantage on the chemical coagulation. The performance of the ECF was found to be affected by the current density, oil concentration, and reaction time according to the analysis by the design of experiment (DOE). Finally, the prediction model was proposed by two approaches, including linear and logarithm function. The latter model gave more accuracy prediction results in terms of treatment efficiency and duration in the lag and stable stages.

• 한국환경보건학회지
• /
• 제35권1호
• /
• pp.53-57
• /
• 2009

In order to treat the complex wastewater containing organic compound and solids, pre-treatment system associated with molecular separation process were investigated. The reductions of COD and turbidity were obtained after coagulation processes using Alum (Aluminium sulfate, $Al_2(SO_4)_2{\cdot}18H_{2}O$) and PACl (poly aluminium chloride as 17% $Al_{2}O_{3}$). The results of study were as follows: using variable dosage of Alum, COD removal was highest at 4,000 mg/l, and the reduction of COD and turbidity was 42% and 92%, respectively. The optimum coagulation would be effective at pH 7.3 than pH 9.0 by the addition of alum at a concentration of 6,000 mg/l and PACl was add at 4.25% in raw complex wastewater with 2,000 mg/l alum at pH 7.3, the reduction of COD was reduced by 32%. But coagulation aid experiments indicated that PACl would be more effective in sludge separation ability than COD removal efficiency.

• 원예과학기술지
• /
• 제17권6호
• /
• pp.758-760
• /
• 1999

몇가지 전처리제와 절화장미에 효과적인 보존용액으로 알려진 HQS+sucrose+ethionine 혼합액을 병행 처리하여 절화수명과 품질을 비교함으로써 절화장미의 관상가치를 향상시키고자 본 실험을 수행하였다. 절화수명은 증류수에 보존시에는 전처리 효과가 없었으며, HQS+sucrose+ethionine 용액에 보존하였을 때에는 aluminum sulfate 혼합액과 NaOCl 전처리에서 수명이 연장되었다. 흡수량은 증류수에 보존한 처리구에서 높은 경향을 보여 생체중과 반대의 결과를 나타냈다. 생체중은 STS+sucrose 전처리를 제외하고는 HQS+sucrose+ethionine 혼합액에 보존시 증류수보다 증가하였다. 꽃목굽음은 HQS+sucrose+ethionine 용액에 보존했을 때에는 모든 전처리에서 증류수보다 지연되는 경향을 보였으며 특히 aluminum sulfate 혼합액 전처리에서는 수명 종료시까지 꽃목굽음 현상이 거의 나타나지 않았다. 화경과 꽃잎의 건물중은 STS+sucrose 전처리를 제외하고는 처리간 차이가 없었으며, 보존용액에 있어서는 HQS 혼합액이 증류수보다 증가하는 경향을 보였다. 화색은 L값과 a값은 처리간 차이가 없었 으나 b값은 증류수에 보존한 처리구에서 최초의 값에 비해 낮게 나타났다.

• 대한소아치과학회지
• /
• 제48권4호
• /
• pp.460-466
• /
• 2021

이 연구의 목적은 유치의 상아질면에서 염화알루미늄 지혈제와 황화철 지혈제의 적용이 레진강화형 글라스아이오노머(RMGIC)의 결합에 미치는 영향을 전단결합강도를 통하여 평가하는 것이다. 20개의 우식이 없는 유구치가 이용되었으며 상아질이 노출되도록 시편을 제작하여 지혈제의 종류에 따라 3개의 군으로 분류하였다. I군은 치면에 25% polyacrylic acid(PAA)를 10초간 사용한 군, II군은 21.3% 염화알루미늄 지혈제를 1분간 사용한 뒤 PAA를 10초간 적용한 군, III군은 20% 황화철 지혈제를 1분간 사용한 뒤 PAA를 10초간 적용한 군으로 설정하였다. 각 군당 10개의 시편에 RMGIC를 중합하여 전단결합강도를 측정하였다. 결합강도는 I군이 10.07 ± 1.83 MPa, 2군에서 7.62 ± 0.78 MPa, 3군에서 5.23 ± 0.78 MPa였다. 모든 군의 결합강도는 유의한 차이를 보였다. 이 연구를 통해 염화알루미늄 지혈제, 황화철 지혈제 모두 상아질에서 RMGIC의 전단결합강도를 감소시키며 황화철 지혈제가 염화알루미늄 지혈제보다 RMGIC의 전단 결합강도를 더 많이 감소시키는 것을 알 수 있었다.

• 한국안전학회지
• /
• 제10권3호
• /
• pp.62-67
• /
• 1995

The combustion characteristics of cellulose Insulation treated with several metal complexes such as Aluminium hydroxide, Cupric sulfate pentahydrate, Magnesium sulfate heptahydrate, Manganese chloride tetrahydrate and Tnisodium phosphate dodecahydrate are studied to evaluate the effectiveness as a potential flame retardant for cellulosic materials. In this study, we found that LOI values of cellulosic materials treated with the metal complexes are generally increased with the increase of their content. At high concentration, CS(24% ) and SP(24% ) show high LOI values, suggesting resistance to flame spread, The materials examined in this study were found to be relatively more resistance to smouldering and flaming combustion in comparision with untreated cellulosic material. The flammability behavior of the materials exhibits combustion process as follows : LOI$\rightarrow$smouldering region$\rightarrow$smouldering-flaming spread region$\rightarrow$flame spread region.

• 펄프종이기술
• /
• 제33권3호
• /
• pp.44-51
• /
• 2001

Sedimentation characteristics such as SS, $BOD_5$, COD removal efficiency of waste water in the toilet paper mill using milk carton were examined. Optimum dosage of coagulant, rapid mixing time and slow mixing time were determined by turbidity, SS, COD, $BOD_5$ and then equation for treatment efficiency was suggested. Mechanical strength of floc was determined by turbidity. For the coagulant, polyacrylamide (PAM) is more efficient for removing pollution than the aluminium sulfate. Effective mixing ratios of PAM and aluminum sulfate to remove pollution are 70:30 and 30:70. The lowest turbidity was showed when rapid mixing at 300 rpm after coagulant injection was applied. That which indicates the highest point of flocs mechanical strength.

• 한국토양비료학회지
• /
• 제18권3호
• /
• pp.282-288
• /
• 1985

산성황산염토양(酸性黃酸鹽土壤)에서 담수시(湛水時) 석회(石灰) 처리량(處理量)과 온도(溫度) 조건(條件)에 따른 유효인산(有效燐酸)과 규산(珪酸)의 변화양상(變化樣相)과 함께 토양산도(土壤酸度)와 여러가지 화학성분(化學成分)과의 상관관계(相關關係)를 구명(究明)한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 담수조건(湛水條件)은 토양(土壤)의 pH, 유효인산(有效燐酸) 유효규산(有效珪酸), 암모니아태(態) 질소(窒素), 제일철(第一鐵)의 증가(增加)와 알루미늄, 유효(有效)망간, 수용성(水溶性) 유황(硫黃)의 감소(減少)를 보였다. 2. 석회처리(石灰處理)는 토양(土壤)의 pH, 유효인산(有效燐酸), 유효규산(有效珪酸), 암모니아태(態) 질소(窒素), 수용성(水溶性) 유황(硫黃)의 증가(增加)와 알루미늄, 제일철(第一鐵), 유효(有效)망간의 감소(減少)를 보였다. 3. 석회(石灰) 12me/100gr 처리(處理)에서 pH 6.5 내외(內外)를 유지(維持)하였을 뿐만아니라 유효인산(有效燐酸), 암모니아태(態) 질소(窒素)의 증가(增加)와 알루미늄, 제일철(第一鐵)의 감소(減少)에도 효과(效果)가 컸다. 4. 온도간(溫度間)에는 $25^{\circ}C$보다 $35^{\circ}C$항온구(恒溫區)에서 유효인산(有效燐酸), 암모니아태(態) 질소(窒素), 그리고 환원태(還元態)인 제일철(第一鐵)의 생성(生成)이 많았다. 5. 담수기간(湛水期間) pH는 유효규산(有效珪酸)과 고도(高度)의 정상관(正相關)이 있었으며, 알루미늄, 제일철(第一鐵), 유효(有效)망간과는 부(負)의 상관관계(相關關係)를 보였다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 봄 학술발표회 논문집
• /
• pp.423-424
• /
• 2003

셀룰로스 직물은 easy care 성능을 부여하기 위하여 가교제로 처리된다. 현재 공업적으로 가장 많이 이용되고 있는 DMDHEU와 같은 N-methyol 가교제는 공정 중 또는 처리된 제품의 저장 중에 발암물질인 포름알데하이드를 유리시키는 경향이 있어 포름알데하이드를 유리시키지 않는 가교결합제의 개발이 활발하게 연구되고 있다. 이러한 비포르말린계 가교제 중 글리옥살은 그 성능은 매우 뛰어나지만 DP 처리시 사용되는 촉매인 aluminium sulfate는 처리직물의 강도저하와 황변을 일으키는 단점을 지니고 있다[1]. (중략)

• 대한가정학회지
• /
• 제41권2호
• /
• pp.107-121
• /
• 2003

This study was discussed the dyeing of wool and nylon fabrics with Chinese Scholar Tree extract. The extracts of Chinese Scholar Tree was prepared in the condition of heating at $95{\pm}5C$, for 1 hour and cooling to 40C. And then the extracts of color matter treate with vacuum concentration at $60{\pm}2^{\circ}C$, 30mmHg and dried with spray dryer. The dyeing of wool and nylon fabric in this experiment was also employed the mordant dyeing method such as pre-mordant, post-mordant and simultaneous mordant method. The mordanting agents used in this study were as followings ; aluminium potassium sulfate, copper(II) acetate monohydrate, chromium potassium sulfate$.$$7H_2O$, Tin(II) chloride dihydrate, iron(II)sulfate $7H_2O$. For an evaluation of the dyeing property of the mordanting agents, the pre-mordant method, the repeat dyeing and the fastness of the light, dry cleaning, washing and rubbing measured respectively. From the results of the dye absorption, the optimum dyeing condition of the wool and nylon fabrics with Chinese Scholar Tree extract is at 80C dyeing temperature for 60 minutes. The optimum concentration of mordanting agent is Al, Cr, Sn 1%, Fe, Cu 2% solution. In general, the fastness property of the dyed wool and nylon fabrics had a comparatively high grade.