• 태양에너지
• /
• 제2권1호
• /
• pp.1-8
• /
• 1982

A theoretical study by numerical method has been performed on the natural convection of an air contained in enclosures. The enclosures have rectangular cross section with one vertical wall heated and the other cooled, and with two horizontal partition plates of finite thermal conductivity. Steady two-dimensional flow was assumed. The computation was executed by means of the Implicit Alternating Direction (I.A.D) finite-difference method. Two partition plates of Aluminium whose thickness were 0.05mm was employed in computation. Isothemals, streamlines, local Nusselt numbers and mean Nusselt numbers were obtained for various Grashof numbers and aspect ratio and these results were compared with those in the case of the enclosure with two horizontal insulated plates. From the present results, the heat transfer in the case of partition plates was greater than that in the case of insulation. This study suggests a method to measure the overall heat-transfer of coefficient in double walls which supported by partition plates for insulative construction.

• 한국전문물리치료학회지
• /
• 제7권2호
• /
• pp.66-75
• /
• 2000

A single subject experimental design (alternating treatment design) was used to compare the effects of Mulligan method and electrotherapy on the pain and limitation of range of motion in patients with frozen shoulder. In the Mulligan method sessions, the physiotherapist performed a posterior and caudal glide on the patient while the patient was performing shoulder flexion and abduction. In the electrotherapy sessions, the patient received ultrasound and interference current treatments. Mulligan method and electrotherapy were alternately performed on each patient. Pain was measured by visual analogue scale (VAS) and range of motion (ROM) was measured by modified finger ladder. The results showed that both Mulligan method and electrotherapy were effective in pain reduce and ROM increase, but Mulligan method was superior to electrotherapy in ROM increase while electrotherapy was superior to Mulligan method in pain reduce.

• Journal of Power Electronics
• /
• 제13권6호
• /
• pp.975-984
• /
• 2013

This paper proposes a robust optimal nonlinear control with an observer to reject the offset errors of position tracking for surface mounted permanent magnet synchronous motors. We provide the control method to reject offset errors and load torque for designing field oriented control (FOC) based the alternating current (AC) frame. The proposed method consists of a torque generator, a commutation scheme, an electrical controller, and a load torque observer. The mechanical controller is designed to compensate for load torque and the offset error and generate the desired torque. The commutation scheme is proposed to create the desired currents for the desired torque. The electrical controller is developed to guarantee the desired currents. The observer is designed to estimate both the velocity and the load torque. In order to obtain the robustness to parameter uncertainties and a gain tuning guide, the linear quadratic regulator method is applied to the proposed method. The closed-loop stability is proven. A detailed process for the FOC design and an analysis of the control methods based on the AC frame are presented. The performance of the proposed method was validated via experiments. The proposed method obtains the FOC based on the AC frame. Furthermore, the position tracking performance of the proposed method is superior to that of the conventional method.

• 한국컴퓨터그래픽스학회논문지
• /
• 제22권3호
• /
• pp.21-29
• /
• 2016

본 논문은 명시야 (bright-field) 현미경 영상를 위한 데이터 기반 세포 분할 알고리즘을 제시한다. 제시된 알고리즘은 일반적인 사전 학습 기법과 다르게 동시에 두 개의 사전과 관련된 희소 코드 (sparse code)를 통해 정의된 에너지 함수의 최소화를 진행하게 된다. 두 개의 사전 중 하나는 명시야 영상에 대해 학습된 사전이고 다른 하나는 사람에 의해 수작업으로 세포 분할된 영상에 대해 학습된 것이다. 학습된 두 개의 사전을 세포 분할 될 새로운 입력 영상에 대해 적용하여 이와 관련된 희소 코드를 획득한 후 픽셀 단위의 분할을 진행하게 된다. 효과적인 에너지 최소화를 위해 합성곱 희소 코드 (Convolutional Sparse Coding)와 Alternating Direction of Multiplier Method(ADMM)이 사용되었고 GPU를 사용하여 빠른 분산 연산이 가능하다. 본 연구는 이전에 사용된 가변형 모델 (deformable model)을 이용한 세포 분할 방식과는 다르게 제시된 알고리즘은 세포 분할을 위해 사전 지식이 필요없이 데이터 기반의 학습을 통해서 쉽고 효율적으로 세포 분할을 진행할 수 있다.

• International Union of Geodesy and Geophysics Korean Journal of Geophysical Research
• /
• 제26권1호
• /
• pp.1-14
• /
• 1998

Various numerical methods for the two dimensional shallow water equations have been applied to the problems of flood routing, tidal circulation, storm surges, and atmospheric circulation. These methods are often based on the Alternating Direction Implicity(ADI) method. However, the ADI method results in inaccuracies for large time steps when dealing with a complex geometry or bathymetry. Since this method reduces the performance considerably, a fully implicit method developed by Wilders et al. (1998) is used to improve the accuracy for a large time step. Finite Difference Methods are defined on a rectangular grid. Two drawbacks of this type of grid are that grid refinement is not possibile locally and that the physical boundary is sometimes poorly represented by the numerical model boundary. Because of the second deficiency several purely numerical boundary effects can be involved. A boundary fitted curvilinear coordinate transformation is used to reduce these difficulties. It the curvilinear coordinate transformation is used to reduce these difficulties. If the coordinate transformation is orthogonal then the transformed shallow water equations are similar to the original equations. Therefore, an orthogonal coorinate transformation is used for defining coordinate system. A multigrid (MG) method is widely used to accelerate the convergence in the numerical methods. In this study, a technique using a MG method is proposed to reduce the computing time and to improve the accuracy for the orthogonal to reduce the computing time and to improve the accuracy for the orthogonal grid generation and the solutions of the shallow water equations.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.550-553
• /
• 1993

Methods of Alternating Noise Canceling were previously developed for the optical instrumentation;one using a dual photo sensor and another using a single photo sensor that could cancel normal mode noise on a transmission line, even if the noise was of equal status noise. But the methods could not remove noise on sensor line. This paper discusses a new method of using a photo sensor with a resistance sensordummy, effectively canceling equal status normal mode noise not only on a sensor line but also on a transmission line of an optical instrumentation. The accuracy of this method has been verified by experiments using sinusoidal wave as an equal status noise on a sensor line and/or rectangular wave as an equal status wide band noise on a transmission line respectively.

• 전기의세계
• /
• 제25권5호
• /
• pp.79-87
• /
• 1976

This paper is to investigate the A.C generation of MHD engine, converting directly the kinetic energy of conductive gas in high temperature to electric power by the effect of magnetic field. It is known that there are at least two kinds of method in A.C MHD power generation; one, by sending stationary plasma flow in an alternating or rotating magnetic field and the other, by transmission of pulse type plasma flow in uniform and constant magnetic field, former method is adopted here. In order to raise the total efficiency of close cycle in combination with nuclear power and MHD genertaion, an argon plasma jet is utilized as heat source, which is not mixed with the seed material, and the design data are obtained for A.C MHD generation in small capacity, but induced voltage and power output have the maximum values, 15 voltages and 7.5W respectively due to plasma flow with low conductivity and weak magnetic field.

• 한국전자파학회논문지
• /
• 제17권9호
• /
• pp.890-894
• /
• 2006

본 논문은 무조건 안정의 특징을 갖는 ADI-FDTD의 특성을 효과적으로 적용하기 위한 가변 분해능 시간 영역 전자파 해석법을 제안한다. 제안된 해석법은 관심 주파수 영역에서 정확도를 유지하면서 분해 시간 간격을 증가시켜 계산 시간을 감소시킬 수 있다.

• 한국정밀공학회지
• /
• 제11권6호
• /
• pp.75-85
• /
• 1994

주기함수의 외력을 갖는 버선형 시스템의 다양한 응답 특성을 구하기 위해 새로운 조화함수법(HBM)을 적용하였다. 새로운 조화함수법의 해는 비선형항을 선형항으로부터 따로 분리시킨 다음 같은 주파수 성분을 갖는 비선형 방정식들을 Newton-Raphosn법으로 풀어서 구하였다. 다양한 천이(Bifurcation) 특성을 해석적으로 판별하기 위하여 HBM의 해를 이용하여 구한 섭동 방정식의 Floquet 지수의 고유해를 사용하였다. 새로이 개발한 HBM과 천이 판별법을 1차원 비선형항을 갖는 구조물인 ALP(Articulated Loading Platform) 모델과 다차원인 비선 형 회전체 모델에 적용시켜 HBM의 해의 정확성과 이들 시스템의 천이 특성의 하나인 Chaos 존재를 확인 하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1331-1333
• /
• 2001

In this study a measurement equipment was designed and made for the nonlinear dielectric constants in dielectrics. The determining method of the nonlinear dielectric constants also was proposed. The measurement equipment was consisted of the wave generation part, the high voltage amplifier part, the measurement part and the data acquisition part. In this equipment the measurement control and the data processing could be conducted by computer. In order to determine the nonlinear dielectric constants alternating sign-wave electric fields are applied to dielectrics with different magnitude and the waves of the electric fields and the response from dielectrics are stored in computer memories. The harmonics of dielectric displacement are obtained by the Fourier transformation of these waves. The nonlinear dielectric constants are determined at the relatively low-field region. The experiment for PZT ceramic samples was done by the equipment and the determining method and as the result meaningful data were obtained.