• 한국항만학회지
• /
• 제13권1호
• /
• pp.123-132
• /
• 1999

It is very important to quantitatively assess the movement of sea water and pollutant dispersion before or after constructing shore structures such as breakwater considering marine environment and long-term utilization of those structures. This assesment is possible through the use of simulation models designed to predict water movement and pollutant dispersion in a certain area. In this study the numerical computations were carried out to predict the sea water quality in the Ilgwang Harbor located at the east coast of Pusan. The flow patters were investigated before and after the development of Ilgwang Harbor. The computational models adopting ADI Method (Alternating Direction Implicit Method) were used here and were already verified from the previous studies. As a results of this study the tidal exchange in Ilgwang Harbor after development proved to be worse due to the increased semi-enclosed at the harbor limit. In order to improve the water quality of this area after development a new method was proposed to improve water quality in the semi-enclosed bay by creation and control of tidal residual currents. For this purpose the unsymmetric structures so called bottom roughness were introduced in this study. The simulation was carried out on the basis of the study by Komatsu et. al. and Gug and we made a conclusion that it is possible to generate a new tidal residual current and to increase the tidal exchange by application of bottom roughness arrangement.

• 대한기계학회논문집B
• /
• 제29권10호
• /
• pp.1156-1162
• /
• 2005

In this study, a noble method is proposed to prevent the edge overcoating (EOC) that may develop near the edge of the steel strip in the gas wiping process of continuous hot-dip galvanizing. In our past study (Trans. of the KSME (B), Vol. 27, No. 8, pp. $1105\~1113$), it was found that EOC is caused by the alternating vortices which are generated by the collision of two opposed jets in the region outside the steel strip. When the two opposed jets collide at an angle much less than $180^{o}$, non-alternating stable vortices are established symmetrically outside the steel strip, which lead to nearly uniform pressure on the strip surface. In order to deflect both jets downward by a certain angle, a cylinder with small diameter is installed tangentially to the exit of the lower lip of the two-dimensional jet. In order to find an optimum cylinder diameter, the three dimensional flow field is analysed numerically by using the commercial code, STAR-CD. And the coating thickness is calculated by using an integral analysis method to solve the boundary layer momentum equation. In order to compare the present noble method with the conventional baffle plate method to prevent the EOC, the flow field with a baffle plate is also calculated. The calculation results show that the tangentially installed cylinder at the bottom lip of the jet exit is more effective than the baffle plate to prevent EOC.

• Investigative Magnetic Resonance Imaging
• /
• 제20권1호
• /
• pp.53-60
• /
• 2016

Purpose: To develop a technique for quantifying the $^{13}C$-metabolites by performing frequency-selective hyperpolarized $^{13}C$ magnetic resonance spectroscopy (MRS) in vitro which combines simple spectrally-selective excitation with spectrally interleaved acquisition. Methods: Numerical simulations were performed with varying noise level and $K_p$ values to compare the quantification accuracies of the proposed and the conventional methods. For in vitro experiments, a spectrally-selective excitation scheme was enabled by narrow-band radiofrequency (RF) excitation pulse implemented into a free-induction decay chemical shift imaging (FIDCSI) sequence. Experiments with LDH / NADH enzyme mixture were performed to validate the effectiveness of the proposed acquisition method. Also, a modified two-site exchange model was formulated for metabolism kinetics quantification with the proposed method. Results: From the simulation results, significant increase of the lactate peak signal to noise ratio (PSNR) was observed. Also, the quantified $K_p$ value from the dynamic curves were more accurate in the case of the proposed acquisition method compared to the conventional non-selective excitation scheme. In vitro experiment results were in good agreement with the simulation results, also displaying increased PSNR for lactate. Fitting results using the modified two-site exchange model also showed expected results in agreement with the simulations. Conclusion: A method for accurate quantification of hyperpolarized pyruvate and the downstream product focused on in vitro experiment was described. By using a narrow-band RF excitation pulse with alternating acquisition, different resonances were selectively excited with a different flip angle for increased PSNR while the hyperpolarized magnetization of the substrate can be minimally perturbed with a low flip angle. Baseline signals from neighboring resonances can be effectively suppressed to accurately quantify the metabolism kinetics.

• 한국항만학회지
• /
• 제12권2호
• /
• pp.303-312
• /
• 1998

It is necessary to quantitatively asses the influence of tidal currents to analysis the coastal current patterns before or after constructing offshore structures like as breakwaters. This assesment can be made through the use of simulation models designed to reproduce the water movements of the area. And it is very important to predict a phenomenon of pollutant dispersion in the area. In this study, in order to predict the changes of sea water quality for the port development plan, Ilgwang harbour, located at the east coast of Pusan, the numerical computations were carried out. The flow patterns were investigated before and after the development of the harbour bay and coastal area connected on it. The computational models are an extension of earlier work on the flow which used the ADI Method (Alternating Direction Implicit Method) in appling to Osaka Bay by KANEKO et al. The transport of pollutant constituents depends upon the currental characteristics of the water-transporting medium. In the currental flow model, water velocities and water levels are computed throughout the regions of it. These value are then used in the mass-balance equation to obtain the pollutant-constituent transport. As a result of this research, the present water quality of Ilgwang harbour and the coastal areas connected on it was proved out some good condition. The changes of sea water quality due to the port development plan of the Ilgwang habour bay and the coastal area were not large compared with the present condition, but it will be likely able to get worse by increasing the semi-enclosed areas in the harbour bay. In order to improve the water quality of the area after development, the method to activate tidal exchange in the area can be needed, as a mitigation technique.

• 한국수자원학회논문집
• /
• 제45권7호
• /
• pp.713-727
• /
• 2012

본 연구에서는 독립 호우사상을 이용하여 이변량 빈도해석 및 유출해석을 수행하고, 이를 기존 단변량 빈도해석 결과와 비교 평가하였다. 본 연구는 규모가 다른 중랑천, 청계천, 우이천유역 등 세 유역에 대해 수행되었다. 유출모형으로 Clark 모형을 이용하였고, 유효우량은 SCS 방법을 적용하여 계산하였다. 강우의 시간분포 모형으로 교호블록 방법 및 Huff 방법을 적용하여 그 결과가 비교될 수 있도록 하였다. 그 결과를 정리하면 다음과 같다. (1) 연최대치 독립 호우사상계열의 이변량 빈도해석 결과, 지속기간이 짧은 경우에는 단변량 빈도해석 결과와의 차이가 매우 크나 지속기간이 길어짊에 따라서 그 차이가 현저히 줄어드는 것으로 나타났다. 아울러 지속기간이 짧은 경우, 단변량 빈도해석 결과가 이변량 빈도해석 결과보다 더욱 크게 나타났으나 특정 지속기간 이상부터 그 결과가 역전되는 것으로 나타났다. (2) 교호블록 시간분포 방법을 적용하는 경우가 Huff 방법을 적용한 경우보다 더욱 큰 첨두유출량을 발생시키는 것으로 나타났다. 아울러 교호블록 방법을 적용하는 경우에는 강우 지속기간의 증가에 따라서 첨두유출량이 점차 증가하는 것으로 나타났으나, 강우 지속기간이 대략 24시간 정도 되었을 때 그 값이 거의 수렴하는 것으로 나타났다. (3) 중랑천 유역에 대해 Huff 방법을 적용하여 유출해석을 수행한 결과에서는 이변량 설계강우를 적용한 경우가 단변량 설계강우를 적용한 경우보다 더욱 큰 홍수량을 발생시키는 것으로 나타났다. 반면에 청계천 및 우이천 유역의 경우에는 이변량 설계강우를 적용한 경우보다 단변량 설계강우를 적용한 경우의 홍수량이 다소 큰 것으로 나타났다. 그러나 교호블록 방법을 적용한 경우에서는 모든 유역에 대해 이변량 설계강우를 적용한 경우가 단변량 설계강우를 적용한 경우보다 큰 홍수량을 발생시키는 것으로 나타났다.

• 물과 미래
• /
• 제21권3호
• /
• pp.291-291
• /
• 1988

2차원 흐름이 원주주위를 지날 때 발생하는 흐름의 변화가 기본방정식인 연속방정식과 운동량방정식에 의하여 수치적으로 해석된다. 수치해석 과정은 기본방정식에 유함수, 와도 및 흐름의 특성을 나타내는 무차원 매개변수를 도입하여 무차원 유함수-와소수송식을 유도한 후, successive over relaxation scheme과 alternating direct implicit scheme으로 수행된다. 수치실험은 레이놀즈수 125-275를 기존의 수치해석에서는 주로 수치실험 결과와 비교한다. 원주표면의 압력을 구하는 방법에 있어서 기존의 수치해석에서는 주로 방사 운동량방정식만을 사용하였으나, 본 논문에서는 기존의 방법외에 방사 운동량방정식 및 접선 운동량방정식에 의해 압력을 계한하고, 두 값을 비교하여 레이놀즈수에 따른 압력을 구하는 방법을 제시한다. 또한 와도의 분포를 도시하여 원주에 의한 후류의 영향을 받지 않는 외부경계의 한계를 새로이 설정한다.

• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2145-2157
• /
• 2018

Congestion Management (CM) is an attractive research area in the electrical power transmission with the power compensation abilities. Reconfiguration and the Flexible Alternating Current Transmission Systems (FACTS) devices utilization relieve the congestion in transmission lines. The lack of optimal power (real and reactive) usage with the better transfer capability and minimum cost is still challenging issue in the CM. The prediction of suitable place for the energy resources to control the power flow is the major requirement for power handling scenario. This paper proposes the novel optimization principle to select the best location for the energy resources to achieve the real-reactive power compensation. The parameters estimation and the selection of values with the best fitness through the Symmetrical Distance Travelling Optimization (SDTO) algorithm establishes the proper controlling of optimal power flow in the transmission lines. The modified fitness function formulation based on the bus parameters, index estimation correspond to the optimal reactive power usage enhances the power transfer capability with the minimum cost. The comparative analysis between the proposed method with the existing power management techniques regarding the parameters of power loss, cost value, load power and energy loss confirms the effectiveness of proposed work in the distributed renewable energy systems.

• 물과 미래
• /
• 제31권4호
• /
• pp.291-297
• /
• 1998

2차원 흐름이 원주주위를 지날 때 발생하는 흐름의 변화가 기본방정식인 연속방정식과 운동량방정식에 의하여 수치적으로 해석된다. 수채해석 과정은 기본방정식에 유함수, 와도 및 흐름의 특성을 나타내는 무차원 매개변수를 도입하여 무차원 유함수-와소수송식을 유도한후, successive over relaxation scheme과 alternating direct implicit scheme으로 수행된다. 수치실험은 레이놀즈수 125-275를 갖는 흐름에 대하여 수행되었으며, 시간에 따른 유선, 와도, 원주표면의 압력을 구하는 방법에 있어서 기존의 수치해석에서는 주로 방사 운동량방정식만을 사용하였으나, 본 논문에서는 기존의 방법외에 방사 운동량방정식 및 접선 운동량방정식에 의해 압력을 계한하고, 두값을 비교하여 레이놀즈수에 따른 압력을 구하는 방법을 제시한다. 또한 와도의 분포를 도시하여 원주에 의한 후류의 영향을 받지 않는 외부경계의한계를 새로이 설정한다.

• 한국자기학회지
• /
• 제1권2호
• /
• pp.79-84
• /
• 1991

개 영역 교류자장 문제 해석을 위해 구부범함수를 사용한 변분법을 제시한다. 이 방법에 사용되는 국부범함수는 유한요소영역에 대한 영역적 분항과 유한요소영역과 무한요소영역 사이의 공유 경계면에 대한 경계적분항의 합으로써 이루어 진다. 경계적분항은 무한 계산영역에 대한 범함수의 무 한요소영역에 대한 영역적분항을 고유경계면에 대한 경계적분으로 치환시킴으로써 얻어진다. 본 논문 에서 제시한 방법을 이론해를 알고 있는 모델에 적요시켜 수치해석 결과를 얻고 그 결과를 이론해와 비교하여 보았다. 본 방법을 사용함으로써 이론해와 잘 일치하는 수치해석 결과를 덩었으며, 그리고 개 영역 교류자장 문제해석에 있어서 계산영역을 축소시킬 수 있기 때문에 컴퓨터 기억용량 감소 및 계산시간을 대폭 단축 시킬 수 있을 것이다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권5호
• /
• pp.250-257
• /
• 2006

It is well known that Grain-oriented electrical steel sheets have two dimensional magnetic properties according to the direction of exciting field such as non-linear phase difference between magnetic flux density and magnetic field intensity vectors, different iron loss and permeability even when an alternating magnetic field is applied. The measurement and application of the two dimensional magnetic properties of the Grain-oriented electrical steel sheets, therefore, are very important for the design and precise performance analysis of electric machines made of them. As the direction of exciting field changes, in this paper, the two dimensional magnetic properties of a Grain-oriented electrical steel sheet, i.e., non-linear B-H curves, phase difference between B and H, and iron loss characteristics, are measured using SST(Single Sheet Tester) which has two axes excitation. The measured results are presented in two ways: using $(B,\theta_B)$ method and using hysteresis loops along rolling and transverse directions, respectively.